ml610q43x
相关结果约388条
ML610400 series/ML610300 series The item "Note" of "Clock Generation Circuit"of User's Manual describes that operation is not guaranteed if the low-speed clock is not supplied to this LSI. However, is it possible to operate the LSI with the 500 kHz RC oscillation alone when only the peripheral circuits that do not use 32.768 kHz are used?
Please be sure to supply the low-speed clock. If the 32.768 kHz low-speed clock is not supplied to this LSI, the low-speed oscillation stop detecting function to monitor the low-speed clock is activated to generate a reset. Related Products: ML610(Q)40x, ML610(Q)42x, ML610(Q)47x, ML610(Q)48x, ML610Q30x, ML610Q35x, ML610Q36x, ML610Q38x, ML610Q41x, ML610Q43x, ML610Q46x, ML620Q416/ML620Q418
Can the U8/U16 Development Tools be used on Linux ?
The U8/U16 Development Tools can be used on Windows only. It can not be used on Linux. Related Products: ML610(Q)40x, ML610(Q)42x, ML610(Q)47x, ML610(Q)48x, ML610Q10x, ML610Q11x, ML610Q17x, ML610Q30x, ML610Q35x, ML610Q36x, ML610Q38x, ML610Q41x, ML610Q43x, ML610Q46x, ML620Q13x, ML620Q15x, ML620Q416/ML620Q418, ML620Q503H/ML620Q504H/ML620Q506H, ML62Q12xx, ML62Q13xx, ML62Q14xx, ML62Q15xx/ML62Q18xx, ML62Q16xx, ML62Q17xx
广告 发布时间 : 2025-03-03
Does it operate if a crystal oscillator is not connected to the low speed clock oscillation pin of microcontroller?
Products equipped with the built-in RC oscillation circuit and clock backup function operate without a crystal oscillator connected. However, products not equipped with the built-in RC oscillation circuit and clock backup function do not operate. Because specification is different for each product, check the features of clock generation circuit in User's Manual of each product. Related Products: ML610(Q)40x, ML610(Q)42x, ML610(Q)47x, ML610(Q)48x, ML610Q17x, ML610Q35x, ML610Q36x, ML610Q38x, ML610Q41x, ML610Q43x, ML610Q46x, ML620Q13x, ML620Q15x, ML620Q416/ML620Q418, ML620Q503H/ML620Q504H/ML620Q506H, ML62Q14xx, ML62Q15xx/ML62Q18xx, ML62Q16xx, ML62Q17xx
Is the LCD display turned OFF in the HALT mode?
Entering the HALT mode does not affect the LCD display. The existing state before entering the HALT mode is maintained. Related Products: ML610(Q)40x, ML610(Q)42x, ML610(Q)47x, ML610Q17x, ML610Q38x, ML610Q41x, ML610Q43x, ML610Q46x, ML620Q416/ML620Q418, ML62Q16xx, ML62Q17xx
What is the appropriate interval for frequency accuracy adjustment? I want to know the detail about the adjustment operation actually performed.
The adjustment interval can be set by a customer program. It is assumed that a frequency accuracy adjustment program is executed before a process requiring high frequency accuracy such as UART communication. The frequency accuracy adjustment program executes the following: (1) Turn ON the internal temperature sensor and execute A/D conversion of sensor output. (2) Calculate an adjustment value based on the A/D conversion result. (3) Set the adjustment value to the low-speed RC oscillation frequency adjustment register (LRCADJ). Related Products: ML610(Q)40x, ML610(Q)42x, ML610(Q)47x, ML610(Q)48x, ML610Q41x, ML610Q43x, ML610Q46x, ML620Q416/ML620Q418, ML620Q503H/ML620Q504H/ML620Q506H
Can I use a gang writer to perform onboard writing?
To perform onboard writing, use the on-chip emulator or a third-party flash writer. Related Products: ML610(Q)40x, ML610(Q)42x, ML610(Q)47x, ML610(Q)48x, ML610Q10x, ML610Q11x, ML610Q17x, ML610Q30x, ML610Q35x, ML610Q38x, ML610Q41x, ML610Q43x, ML610Q46x, ML620Q13x, ML620Q15x, ML620Q416/ML620Q418, ML620Q503H/ML620Q504H/ML620Q506H, ML62Q12xx, ML62Q13xx, ML62Q14xx, ML62Q15xx/ML62Q18xx, ML62Q16xx, ML62Q17xx
Do I need a PC when writing to flash memory with the on-chip emulator?
It is needed. The on-chip emulator uses tool software on the PC to write to flash memory. Related Products: ML610(Q)40x, ML610(Q)42x, ML610(Q)47x, ML610(Q)48x, ML610Q10x, ML610Q11x, ML610Q17x, ML610Q30x, ML610Q35x, ML610Q38x, ML610Q41x, ML610Q43x, ML610Q46x, ML620Q13x, ML620Q15x, ML620Q416/ML620Q418, ML620Q503H/ML620Q504H/ML620Q506H, ML62Q12xx, ML62Q13xx, ML62Q14xx, ML62Q15xx/ML62Q18xx, ML62Q16xx, ML62Q17xx
What is the definition of frame frequency of the LCD driver?
Our company defines the frame frequency without including the frame reverse. For details, please see the common output waveform or segment output waveform in Chapter "LCD Driver" of the product User's Manual. Related Products: ML610(Q)40x, ML610(Q)42x, ML610(Q)47x, ML610Q17x, ML610Q38x, ML610Q41x, ML610Q43x, ML610Q46x, ML620Q416/ML620Q418, ML62Q16xx, ML62Q17xx
When reading data on the data flash assigned in Segment 2 with the assembler, data cannot be read if written as follows: L ER14,[ER8]
When reading data on the data flash assigned in Segment 2 with the assembler, specify "2" in DSR, and load with the addressing with physical segment. MOV R0,#2 ST R0,DSR L ER14,DSR:[ER8] Related Products: ML610(Q)40x, ML610(Q)42x, ML610(Q)47x, ML610(Q)48x, ML610Q10x, ML610Q11x, ML610Q17x, ML610Q30x, ML610Q35x, ML610Q38x, ML610Q41x, ML610Q43x, ML610Q46x, ML620Q13x, ML620Q15x, ML620Q416/ML620Q418, ML620Q503H/ML620Q504H/ML620Q506H, ML62Q12xx, ML62Q13xx, ML62Q14xx, ML62Q15xx/ML62Q18xx, ML62Q16xx, ML62Q17xx
Are there any problems if program codes are located in the software interrupt vector areas?
The software interrupt vector areas (0080H to 00FFH) can be used as normal program areas if the SWI instruction is not used. Related Products: ML610(Q)40x, ML610(Q)42x, ML610(Q)47x, ML610(Q)48x, ML610Q10x, ML610Q11x, ML610Q17x, ML610Q30x, ML610Q35x, ML610Q36x, ML610Q38x, ML610Q41x, ML610Q43x, ML610Q46x, ML620Q13x, ML620Q15x, ML620Q416/ML620Q418, ML620Q503H/ML620Q504H/ML620Q506H, ML62Q12xx, ML62Q13xx, ML62Q14xx, ML62Q15xx/ML62Q18xx, ML62Q16xx, ML62Q17xx
Can I write data on 0000H to 0FFFH of the FLASH data area Segment A?
Reading is possible but not writing. Segment A is the mirror area of Segment 2. If data are written on Segment 2, they can be also read from Segment A. Related Products: ML610(Q)40x, ML610(Q)42x, ML610(Q)47x, ML610(Q)48x, ML610Q10x, ML610Q11x, ML610Q17x, ML610Q30x, ML610Q35x, ML610Q38x, ML610Q41x, ML610Q43x, ML610Q46x, ML620Q13x, ML620Q15x, ML620Q416/ML620Q418, ML620Q503H/ML620Q504H/ML620Q506H, ML62Q12xx, ML62Q13xx, ML62Q14xx, ML62Q15xx/ML62Q18xx, ML62Q16xx, ML62Q17xx
Is there any sample code for setting the output destination of the printf function (write function called in) to UART?
Please refer to the UART sample code of the reference software to create it. Related Products: ML610(Q)40x, ML610(Q)42x, ML610(Q)47x, ML610(Q)48x, ML610Q10x, ML610Q11x, ML610Q17x, ML610Q30x, ML610Q35x, ML610Q36x, ML610Q38x, ML610Q41x, ML610Q43x, ML610Q46x, ML620Q13x, ML620Q15x, ML620Q416/ML620Q418, ML620Q503H/ML620Q504H/ML620Q506H, ML62Q12xx, ML62Q13xx, ML62Q14xx, ML62Q15xx/ML62Q18xx, ML62Q16xx, ML62Q17xx
|
|
|
