WAGO SMD PCB Terminal Blocks Selection Guide

WAGO SMD PCB Terminal Blocks

选型目录：

SMD PCB Terminal Blocks

We Connect Your Light

WAGO SMD PCB Terminal Blocks

SMD PCB Terminal Blocks

Your Benefits:

▪

Low profiles minimize on-board LED shadowing

▪

Push-in termination of solid conductors

▪

Terminal strips of different lengths can be assembled without pole loss,

reducing the number of variants and lowering production costs

▪

Available in 1–3 pole configurations

▪

Delivery in tape-and-reel packaging for full integration

into SMT soldering process

▪

Lower costs via automated pick-and-place assembly

A compact and low-profile PCB connection is required for

optimal uniform light distribution that minimizes shadow

ing. WAGO’s SMD PCB terminal blocks, with their combi

nation of a flat design and wide application scope, fully

satisfy these demands. Furthermore, 1-, 2- and 3-pole

terminal blocks (2059, 2060 and 2061 Series) can be

assembled without pole loss, providing total flexibility with

just a few models. All surface-mount PCB terminal blocks

come in tape-and-reel packaging for full integration into

an automated assembly process.

Applications

The numerous advantages of WAGO’s SMD line of PCB

terminal blocks allow them to support a wide range of

applications. From the newest generation of ultra-flat LED

drivers via compact, conventionally wired LED spotlights,

right up to automatically (front- or back-side) wired,

recessed ceiling luminaires, WAGO’s SMD PCB terminal

blocks provide the perfect connection between driver and

module.

The terminal blocks accommodate a broad range of con

ductors and carry major international approvals making

them highly versatile for worldwide applications.

Surface-Mount Technology

Surface-Mount Technology (SMT) means soldering

electronic components directly onto PCB surface pads

without drilling holes.

The basic SMT process consists of applying solder paste

to the PCB via solder dispensing equipment, screen or

stencil printing. SMT assembly is performed using fully

automated placement machines. Surface-mount compo

nents are soldered to the board in convection or vapor

phase ovens.

Reflow Soldering Process

Automated assembly

Printing (solder)

SMD components

SMD

2059 Series

For the Smallest Sizes

▪

Low profile: just 2.7 mm

▪

Pin spacing: 3 mm

▪

Conductor range: 26 ... 20 AWG

(0.14 ... 0.5 mm

), solid

▪

Push-in termination of solid conductors

▪

Easy conductor removal via operating tool

▪

Available in 1–3 pole variants

▪

Side-by-side assembly without pole loss

▪

Available in tape-and-reel packaging

Push-in termination of solid con

ductors

Easy conductor removal (e.g., via the

optional 206-859 Operating Tool)

2059 Series, Pin Spacing: 3 mm

Pin spacing

3 mm / 0.118 inch

Conductor Data

Ratings per

IEC/EN 60664-1

Connection technology

PUSH WIRE®

Overvoltage category

I I I

I I

Conductor cross-section:

solid

0.14 ... 0.34 mm

Pollution degree

AWG

26 ... 22 “sol.”

Rated voltage

63 V

160 V

320 V

Strip length

4 ... 5.5 mm / 0.16 ... 0.22 inch

Rated surge voltage

2.5 kV

Rated current

3 A

Approvals per

UL 1977

Conductor cross-section:

solid

0.5 mm²

Rated voltage (1-pole)

600 V

AWG

20 “sol.”

Rated voltage (2 or more poles)

250 V

Strip length

6 ... 7.5 mm / 0.24 ... 0.3 inch

Nominal current UL

3 A

Note (conductor cross-sec

tion)

No reconnection of smaller

conductor cross-sections

Pole No.

Item No.

Pack. Unit

SMD PCB terminal blocks in tape-and-reel packaging, white

Reel diameter: 330 mm

2059-301/998-403

31800 (12 x 2650)

2059-302/998-403

21000 (12 x 1750)

2059-303/998-403

21000 (12 x 1750)

L = (pole no. x pin spacing) – 0.1 mm

<__

__>

<__

__>

()

7.4

7.9

6.5

2.7

2.5

8.7

0.4

0.5

0.8

0.75

1.4

0.3

___>

___

(

)

(

__>

Assembly: Place PCBs on a flat surface

and connect terminal blocks on

adjoining PCBs via board-to-board link.

Disassembly: Pull PCBs apart (max.

10 mating cycles).

The PCBs must be secured.

Insert a board-to-board link into

the terminal block.

2059 Series, Board-to-Board Link

Pin spacing

3 mm / 0.118 inch

Pole No.

Item No.

Pack. Unit

Pin length:

15.3 mm

Pin length:

17.5 mm

Pin length:

20.5 mm

Ratings per

IEC/EN 60664-1

2059-901

2059-901/018-000

2059-901/021-000

1500

Overvoltage category

I I I

I I

2059-902

2059-902/018-000

2059-902/021-000

500

Pollution degree

2059-903

2059-902/018-000

2059-902/021-000

375

Rated voltage

63 V

160 V

320 V

2059-904

2059-904/018-000

2059-904/021-000

250

Rated surge voltage

2.5 kV

Rated current

3 A

0.6

2.75

max. 20

min. 2.4 ... max. 3.3 (15.3)

min. 4.6 ... max. 5.1 (17.5)

min. 7.6 ... max. 8.2 (20.5)

<______________________

2060 Series

For Manual and Automated Wiring Systems

▪

Low profile: 4.5 mm

▪

Pin spacing: 4 mm

▪

Terminate conductors from 0.2 to 0.75 mm

(24 ... 18 AWG)

▪

Push-in termination of solid conductors

▪

Push-button for easy connection and disconnection

of all conductor types

▪

Available in 1–3 pole variants

▪

Side-by-side assembly without pole loss

▪

Available in tape-and-reel packaging

Insert solid conductors via

push-in termination.

Insert/remove fine-stranded conductors by lightly pressing on a push-button

(e.g., using the optional 206-860 Operating Tool).

2060 Series, Pin Spacing: 4 mm

Pin spacing

4 mm / 0.157 inch

Conductor Data

Ratings per

IEC/EN 60664-1

Connection technology

Push-in CAGE CLAMP®

Overvoltage category

I I I

I I

Conductor cross-section:

solid

0.2 ... 0.75 mm

Pollution degree

Conductor cross-section:

fine-stranded

0.2 ... 0.75 mm

Rated voltage

63 V

160 V

320 V

Conductor cross-section:

fine-stranded

0.25 ... 0.34 mm

(with insulated ferrule)

Rated surge voltage

2.5 kV

Conductor cross-section:

fine-stranded

0.25 ... 0.34 mm

(with uninsulated ferrule)

Rated current

9 A

AWG

24 ... 18

Approvals per

UL 1977

Strip length

7 ... 9 mm / 0.28 ... 0.35 inch

Rated voltage (1-pole)

600 V

Rated voltage (2 or more poles)

320 V

Nominal current UL

9 A

Pole No.

Item No.

Pack. Unit

SMD PCB terminal blocks with push-buttons in tape-and-reel packaging, white

Reel diameter: 330 mm

2060-451/998-404

13500 (9 x 1500)

2060-452/998-404

9000 (9 x 1000)

2060-453/998-404

6750 (9 x 750)

L = (pole no. x pin spacing) – 0.1 mm

2.1

1.2

2.2

<____

<___

___>

6.1

<__________

_______

3.5

0.4

<___

0.4

___>

0.95

<___

<__

)

()

<_______

_______

12.7

<_____

____>

11.1

<____

____>

4.5

13.1

0.4

___>

2060 Series

The 2-pole SMD PCB terminal

block with 8 mm pin spacing has

been added to WAGO’s portfolio,

providing higher rated voltages up

to 630 V/6 kV/2 in LED and industrial

applications.

Besides standard wiring, several LED

modules can be easily assembled

into a single string using board-to-

board links. This minimizes labor (no

manual wiring) and materials needed

for connecting LED modules.

WAGO’s 2060 Series THR PCB

Terminal Blocks with soldering pins

are ideal for both THR and wave

soldering. The 2060 THR Series is

available in both white and black

housings.

Additional information at:

www.wago.com/2060

Assembly: Place PCBs on a flat surface

and connect terminal blocks on

adjoining PCBs via board-to-board link.

Disassembly: Pull PCBs apart (max.

10 mating cycles). The PCBs must

be secured.

Board-to-Board Link

Pin Spacing: 8 mm

THR and Wave Soldering

2060 Series, Board-to-Board Link

Pin spacing

4 mm / 0.157 inch

Pole No.

Item No.

Pack. Unit

Ratings per

IEC/EN 60664-1

2060-951/028-000

1500

Overvoltage category

I I I

I I

2060-952/028-000

500

Pollution degree

2060-953/028-000

375

Rated voltage

63 V

160 V

320 V

Rated surge voltage

2.5 kV

Note: Only suitable for 2060-45x, not for 2060-40x

Rated current

9 A

2060 Series, Pin Spacing: 8 mm

Pin spacing

8 mm / 0.314 inch

Conductor Data

Ratings per

IEC/EN 60664-1

Connection technology

Push-in CAGE CLAMP®

Overvoltage category

I I I

I I

Conductor cross-section:

solid

0.2 ... 0.75 mm

Pollution degree

Conductor cross-section:

fine-stranded

0.2 ... 0.75 mm

Rated voltage

400 V

630 V

1000 V

Conductor cross-section:

fine-stranded

0.25 ... 0.34 mm

(with insulated ferrule)

Rated surge voltage

6 kV

Conductor cross-section:

fine-stranded

0.25 ... 0.34 mm

(with uninsulated ferrule)

Rated current

9 A

AWG

24 ... 18

Approvals per

UL 1977

Strip length

7 ... 9 mm / 0.28 ... 0.35 inch

Rated voltage

600 V

Nominal current UL

9 A

Pole No.

Item No.

Pack. Unit

SMD PCB terminal blocks with push-buttons in tape-and-reel packaging, white

Reel diameter: 330 mm

2060-852/998-404

6750 (9 x 750)

max. 21

<_____

<_____________________

______>

max. 21

<_____

______>

4.5

min. 4.4 ... max. 6.4

<_____________________

min. 4.4 ... max. 6.4

0.4

___>

2.1

1.2

6.1

<__________

_______

3.5

0.4

<___

0.4

___>

0.95

<__

2.2

<____

11.9

<______

______>

<___

___>

()

<___

___>

<_______

_______

12.7

<_____

____>

11.1

<____

____>

4.5

13.1

2061 Series

For Direct Power System Feed-In

▪

Low profile: 5.6 mm

▪

Pin spacing: 6 mm

▪

Terminate conductors from 0.5 to 1.5 mm

(20 ... 16 AWG)

▪

Push-in termination of solid conductors

▪

Push-button for easy connection and

disconnection of all conductor types

▪

Ideal for automated wiring systems

▪

300 V UL 1059

▪

Available in 1–3 pole variants

▪

Side-by-side assembly without pole loss

▪

Available in tape-and-reel packaging

Insert/remove fine-stranded con

ductors by lightly pressing on a

push-button (e.g., using the optional

206-861 Operating Tool).

The 2061 Series is also available

as a THR variant with solder pins in

both white and black housings.

2061 Series, Pin Spacing: 6 mm

Pin spacing

6 mm / 0.24 inch

Conductor Data

Ratings per

IEC/EN 60664-1

Connection technology

Push-in CAGE CLAMP®

Overvoltage category

I I I

I I

Conductor cross-

section: solid

0.5 ... 1.5 mm

Pollution degree

Conductor cross-

section: fine-stranded

0.5 ... 1.5 mm

Rated voltage

250 V

320 V

630 V

Conductor cross-

section: fine-stranded

0.5 ... 0.75 mm

(with insulated ferrule)

Rated surge voltage

4 kV

Conductor cross-

section: fine-stranded

0.5 ... 0.75 mm

(with uninsulated ferrule)

Rated current

17.5 A

AWG

20 ... 16

Approvals per

UL 1059

Strip length

7 ... 10 mm / 0.28 ... 0.39 inch

Rated voltage (1-pole)

600 V

Rated voltage (2 or more poles)

300 V

Nominal current UL

10 A

Pole No.

Item No.

Pack. Unit

SMD PCB terminal blocks with push-buttons in tape-and-reel packaging, white

Reel diameter: 330 mm

2061-601/998-404

8100 (9 x 900)

2061-602/998-404

6300 (9 x 700)

2061-603/998-404

4050 (9 x 450)

Board-to-Board Link

Pin length: 30 mm

Pin length: 34 mm

2061-901

2061-901/034-000

700

2061-902

2061-902/034-000

300

2061-903

2061-903/034-000

200

2061-904

2061-904/034-000

100

L = (pole no. x pin spacing) – 0.3 mm

Assembly: Place PCBs on a flat sur

face and connect terminal blocks on

adjoining PCBs via board-to-board

links (2061-901).

Disassembly: Pull PCBs apart (max.

10 mating cycles). The PCBs must be

secured.

The installation of the board-to-board links is identical with

both 2059 and 2060 Series.

<_______

_______

15.2

<_____

_____>

13.8

<____

_____>

0.6

____>

2.2

5.2

5.6

15.8

3.2

<____

<___

___>

6.5

<_________

______

___>

6.5

4.5

2.1

0.4

<___

2.7

)

2.4

1.8

4.6

1.6

2.9 ... 6.0 (30)

8.1 ... 9.5 (34)

5.6

0.6

≤ 20

2065 Series

Reduced to the Essentials

▪

Maximum conductor range,

minimum installation space: 0.2 ... 0.75 mm²

▪

Compact design minimizes

on-board LED shadowing

▪

Low profile of just 2.7 mm provides

uniform light distribution

▪

A reliable alternative

to wire soldering

NOTE: Terminal block without insulation housing!

Protection against accidental contact must be provided at voltages higher than low voltages (e.g., SELV/PELV) for the relevant

application.

2065 Series

Technical Data

Conductor Data

Ratings per

IEC/EN 60664-1

Connection technology

Push-in CAGE CLAMP®

Overvoltage category

I I I

I I

Conductor cross-section:

solid

0.2 ... 0.75 mm

Pollution degree

Conductor cross-section:

fine-stranded

0.2 ... 0.75 mm

Rated voltage*

320 V

630 V

Rated surge voltage

4 kV

Rated current

9 A

AWG

24 ... 18

Strip length

min. 7.5 mm / 0.3 inch

Pole No.

Item No.

Pack. Unit

SMD PCB terminal blocks with push-buttons in tape-and-reel packaging

Reel diameter: 330 mm

2065-100/998-403

Board-to-Board Link

Pin length:

2065-131

15.6 mm

1500

2065-133

17.6 mm

1500

*Rated voltage for 6.5 mm pin spacing

Any layout deviation must meet the insulation coordination safety standards (EN/IEC 60664-1) or end device standard requirements.

Insert solid conductors via push-

in termination.

Insert fine-stranded conductors

and remove all conductor types

via operating tool (2065-189).

The operating tool’s funneled con

ductor entry securely guides the

conductor into the terminal block.

6.5

<___

___>

4.42

4.22

3.62

2.7

7.8

2.3

2.9

5.1

6.75

0.2

0.15

4.6

6.9

1.8 +/- 0.4

min. 0.6

≤20

min. 0.6

≤20

3.8 +/- 0.4

2070 Series

For Back-Side Wiring of LED Modules

▪

Shift wiring to the back of the LED modules

▪

Low profile of just 1.1 mm on top of the PCB

minimizes shadowing

▪

Easy pick-and-place assembly and minimum

shadowing via optional cover

▪

Optional marking of the clamping point

helps prevent wiring errors

▪

Clearance and creepage distances for use

up to 500 V per EN 60598-1

▪

For manual and automated wiring systems

Note:

Go to our online shop to find more variants without cover and with pole marking.

Reel diameter: 381 mm (available upon request)

2070 Series

Technical Data

Conductor Data

Ratings per

IEC/EN 60664-1

Connection technology

Push-in CAGE CLAMP®

Overvoltage category

I I I

I I

Conductor cross-section:

solid

0.2 ... 0.75 mm

Pollution degree

Conductor cross-section:

fine-stranded

0.2 ... 0.75 mm

Rated voltage*

320 V

630 V

Rated surge voltage

4 kV

Rated current

9 A

AWG

24 ... 18

Strip length

8.5 ... 10 mm / 0.3 inch

Pole No.

Item No.

Through-board SMD PCB terminal blocks with cover

Reel diameter: 330 mm

2070-461/998-406

2070-462/998-406

2070-463/998-406

Insert fine-stranded conductors

and remove all conductor types

via operating tool. Connect solid

conductors via push-in termina

tion.

Use an operating tool (2070-400)

or simply “twist and pull” to remove

solid conductors.

Shift wiring to the back of the LED

modules via 2070 Series SMD PCB

Terminal Blocks.

<___

<__

<____

3.1

6.5

22.2

18.4

12.6

4.3

5°

6.45

0.95

<___

19.6

3.5

10.9

3.3

6.5

10.5

11.8

7.45

<___ ____

2075 Series

For Vertical Wiring

▪

Wiring performed on the back

of the LED module simplifies

lighting manufacturing

▪

Low profile minimizes

on-board LED shadowing

▪

Compact design provides

uniform light distribution

▪

An economical alternative

to wire soldering

▪

Supports both manual and

automated wiring systems

Insert solid conductors via push-in

termination.

Simply twist and pull to remove conduc

tors – no tools required.

NOTE: Terminal block without insulation housing!

2075 Series

Technical Data

Conductor Data

Ratings per

IEC/EN 60664-1

Connection technology

PUSH WIRE®

Overvoltage category

I I I

I I

Conductor cross-section:

solid

0.34 ... 0.75 mm

Pollution degree

AWG

20 ... 18

Rated voltage*

200 V

500 V

Strip length

min. 3.65 mm / 0.14 inch

Rated surge voltage

4 kV

Rated current

9 A

Pole No.

Item No.

Through-board SMD PCB terminal block in tape-and-reel packaging

Reel diameter: 330 mm

2075-381/997-404

*Rated voltage for 7 mm pin spacing

Layout must meet the insulation coordination safety standards (EN/IEC 60664-1) or end device standard requirements.

NOTE: Terminal block without insulation housing!

Protection against accidental contact must be provided at voltages higher than low voltages (e.g., SELV/PELV) for the relevant

application.

3.9

<__________________________________

<______________

___________

_____

______

____

___

<____

<__________________

15.7

10.85

min.

3.2

14.05

4.6

7.9

4.7

0.37

2.2

9.5

4.6

17.2

0.3

0888-0158/0107-6901 – SMD FAMILIY BROCHURE 1.7 US – 02/2020-00 – Printed in Germany – Subject to changes

WAGO Kontakttechnik GmbH & Co. KG

Postfach 2880 · D-32385 Minden

Hansastraße 27 · D-32423 Minden

info@wago.com

www.wago.com

Headquarters

+49 (0)571/ 887 - 0

Sales

+49 (0)571/ 887 - 44 222

Orders

+49 (0)571/ 887 - 44 333

Fax

+49 (0)571/ 887 - 844 169

WAGO is a registered trademark of WAGO Verwaltungsgesellschaft mbH.

copyright. Distribution or modification of the contents of these pages and videos is prohibited. Furthermore, the content may neither be copied nor made available to third parties for

commercial purposes. Also subject to copyright are the images and videos that were made available to WAGO Kontakttechnik GmbH & Co. KG by third parties.”

下载整本选型指南

您正在使用的浏览器版本过低，将不能正常浏览产品选型内容。

邮箱分享
| 转发至：