Trelleborg Multigates FL21 plastic IP codes Table

of 3
【选型】特瑞堡(Trelleborg)多孔/分体式多孔/单孔穿线电缆密封部件选型指南
选型目录:
Products Introduction
Multigates FL21 Metal
Multigates FL21 Plastic
Multigates FL13 Metal
Industrial Connector Cut-Out
Splitting Multigates
Singlegates
Multigates FL21 plastic IP codes
For quatation contact: finland.offers@trelleborg.com
www.trelleborg.com/en/moulded-components
Multigates FL21 plastic
Dimensions of M 20-80
www.trelleborg.com/en/moulded-components
IP codes
0
1
2
3
4
5
6
0
1
2
3
4
5
6
7
8
Meaning for
protection from
ingress of water:
No protection
provided
Vertically dripping
Enclosure tilted
15º from the
vertical
Limited spraying
Splashing from
all directions
Hosing jets from
all directions
Strong hosing
jets from all
directions
Temporary
immersion
Immersion
No protection
Second numeral
Protection against harmful ingress of water
IP
Requirements
Example
Protected
against vertically
falling drops of
water
Protected against
vertically falling
drops of water with
enclosure tilted 15°
from the vertical.
Protected
against sprays
to 60° from the
vertical
Protected
against water
splashed from all
directions
Protected
against
lowpressure jets
of waterfrom all
directions
Protected
against strong
jets of water
Protected
against the
effects of
immersion
between 15.0
cm and 1.0 m
Protected
against longer
periods of
immersion under
pressure
First numeral
Protection against ingress of solid foreign objects
Meaning protection
of persons against
access to hazar-
dous parts with:
IP
Requirements
Example
No protection
provided
Back of hand
Finger
Tool
Wire
Wire
Wire
No protection
Full penetration of 50.0
mm diameter sphere not
allowed and shall have
adequate clearance
from hazardous parts.
Contact with hazardous
parts not permitted
Full penetration of 12.5
mm diameter sphere
not allowed. The jointed
test finger shall have
adequate clearance
from hazardous parts
The access
probe of 2.5
mm diameter
shall not
penetrate
The access
probe of 1.0 mm
diameter shall
not penetrate
Limited
ingress of
dust permitted
(no harmful
deposit, refer to
standard)
Totally protected
against ingress
of dust
【选型】特瑞堡(Trelleborg)多孔/分体式多孔/单孔穿线电缆密封部件选型指南
选型目录:
Products Introduction
Multigates FL21 Metal
Multigates FL21 Plastic
Multigates FL13 Metal
Industrial Connector Cut-Out
Splitting Multigates
Singlegates
Multigates FL21 plastic IP codes

您正在使用的浏览器版本过低,将不能正常浏览产品选型内容。

  • 收藏
服务热线

联系我们

954668/400-830-1766(工作日 9:00-18:00)

service@sekorm.com

投诉与建议

E-mail:claim@sekorm.com

商务合作

E-mail:contact@sekorm.com

收藏
收藏当前页面