WAGO Accessories for Automation Technology and Interface Electronic Selector
【选型】WAGO(万可)综合产品选型指南(1-6册合集简短版)
选型目录:
Company and Product Profile
Rail-Mounted Terminal Block Systems
Device Terminal Blocks and Installation Connectors
Pluggable Connectors
PCB Terminal Blocks
WINSTA Pluggable Connection System
Automation Technology
Power Supplies
Interface Electronic
Current and Energy Measurement Technology
Accessories for Automation Technology and Interface Electronic
Marking Systems, Tools, Measurement Devices and Mounting Accessories
Technical Section
Index
www.wago.com
230
Accessories for Automation Technology and Interface Electronic
Product Short Form
16-Channel Module with Interface Module
The new 750-14xx and 750-15xx Series
Bus Modules with a pluggable connector
per DIN 41 651 offer 16 digital channels
in a module less than 1⁄2 inch (12 mm)
wide. Offering quick connections and a
space-efficient design, the DIN-rail-mount
interface modules simplify installation in
confined areas and conveniently relocate
the termination point. When combined with
WAGO interface modules (e.g., item no.
289-614, 289-611), a switch cabinet can
be pre-wired before installation to minimize
wiring time and errors. This is beneficial as
wiring can be performed independently of
construction.
Pre-wired electronics can be installed right
before start, saving valuable time during
the final stages of project completion. The
modules are also ideal for connecting
series machines or relay modules tasked
with the higher loads common to buildings
and industrial applications. The interface
module also combines the advantages of
relays (e.g., manual operation or rapid
replacement via socket-mounted versions)
with the benefits of a modern I/O system.
Another ideal application would be the
integration of pneumatic controllers into a
fieldbus network.
Most pneumatic modules have an
appropriate connector and can be
controlled by the WAGO-I/O-SYSTEM.
Five variants are available: two 16-channel
input or output modules (one high-side and
one low-side switching variant), as well as a
version combining 8 inputs and 8 outputs.
WAGO System Wiring and Interface Modules
– Overview and Application Examples –
www.wago.com
231
10
Accessories for Automation Technology and Interface Electronic
Product Short Form
288/289 Series
DIN-Rail-Mount Relay
Modules
Snapping a module onto DIN-rail.
“Side-entry” conductor termination
“Front-entry” conductor termination
Examples:
LED module
Diode module
Solder pins for self-assembly
Relay module with fuse, 16 channels
Relay module, 16 channels
Relay module, 8 channels
WAGO Interface Cable,
706-7753/302-100
WAGO Interface Cable,
706-7753/300-100
www.wago.com
232
Accessories for Automation Technology and Interface Electronic
Product Short Form
WAGO System Wiring
– Overview and Application Examples –
SIEMENS S7-300
WAGO Interface Cables
WAGO Interface Modules
Item No.
Qt y.
Type
Qt y.
CPU
6ES7 313-5BE01-0AB0
16 DI/16 DO
706-2300/301-XXX
1
T16ES/T16S
1/1
6ES7 313-5BF03-0AB0
16 DI/16 DO
706-2300/301-XXX
1
T16ES/T16S
1/1
6ES7 313-6BE01-0AB0
16 DI/16 DO
706-2300/301-XXX
1
T16ES/T16S
1/1
6ES7 313-6BF03-0AB0
16 DI/16 DO
706-2300/301-XXX
1
T16ES/T16S
1/1
6ES7 313-6CE01-0AB0
16 DI/16 DO
706-2300/301-XXX
1
T16ES/T16S
1/1
6ES7 313-6CF03-0AB0
16 DI/16 DO
706-2300/301-XXX
1
T16ES/T16S
1/1
6ES7 314-6BF01-0AB0
16 DI/16 DO
706-2300/301-XXX
1
T16ES/T16S
1/1
6ES7 314-6BG03-0AB0
16 DI/16 DO
706-2300/301-XXX
1
T16ES/T16S
1/1
6ES7 314-6CF01-0AB0
16 DI/16 DO
706-2300/301-XXX
1
T16ES/T16S
1/1
6ES7 314-6CG03-0AB0
16 DI/16 DO
706-2300/301-XXX
1
T16ES/T16S
1/1
DI
6ES7 321-1BH02-0AA0
16 DI
706-2300/300-XXX
1
T16ES
1
6ES7 321-1BH10-0AA0
16 DI
706-2300/300-XXX
1
T16ES
1
6ES7 321-1BH80-0AA0
16 DI
706-2300/300-XXX
1
T16ES
1
6ES7 321-1BL00-0AA0
32 DI
706-2300/301-XXX
1
T16ES
2
6ES7 321-1BL80-0AA0
32 DI
706-2300/301-XXX
1
T16ES
2
6ES7 321-1BP00-0AA0
64 DI
706-2300/100-XXX
2
T16ES
4
6ES7 321-7BH01-0AA0
16 DI
706-2300/101-XXX
1
T16ES
1
6ES7 321-7BH80-0AA0
16 DI
706-2300/101-XXX
1
T16ES
1
DO
6ES7 322-1BH01-0AA0
16 DO
706-2300/300-XXX
1
T16ES /T16S
1
6ES7 322-1BH10-0AA0
16 DO
706-2300/300-XXX
1
T16ES /T16S
1
6ES7 322-1BH80-0AA0
16 DO
706-2300/300-XXX
1
T16ES /T16S
1
6ES7 322-1BL00-0AA0
32 DO
706-2300/301-XXX
1
T16ES /T16S
2
6ES7 322-1BP00-0AA0
64 DO
706-2300/200-XXX
2
T16ES /T16S
4
6ES7 322-1EH01-0AA0
16 D0
706-2300/300-XXX
1
T16ES /T16S
1
6ES7 322-8BF00-0AB0
8 DO
706-2300/201-XXX
1
T8ES /T8S
1
AI
6ES7 331-7HF01-0AB0
8 AI
706-2300/400-XXX
1
A8ES
1
6ES7 331-7KF02-0AB0
8 AI
706-2300/400-XXX
1
A8ES
1
6ES7 331-7NF00-0AB0
8 AI
706-2300/404-XXX
1
A8ES
1
6ES7 331-7NF10-0AB0
8 AI
706-2300/406-XXX
1
A8ES
1
6ES7 331-7SF00-0AB0
8 AI
706-2300/400-XXX
1
A8ES
1
6ES7 331-7TF00-0AB0
8 AI
706-2300/400-XXX
1
A8ES
1
AO
6ES7 332-5HB01-0AB0
2 AO
706-2300/400-XXX
1
A4ES
1
6ES7 332-5HB81-0AB0
2 AO
706-2300/400-XXX
1
A4ES
1
6ES7 332-5HD01-0AB0
4 AO
706-2300/404-XXX
1
A4ES
1
6ES7 332-5HF00-0AB0
8 AO
706-2300/406-XXX
1
A8ES
1
6ES7 332-7ND02-0AB0
4 AO
706-2300/400-XXX
1
A4ES
1
6ES7 332-8TF00-0AB0
8 AO
706-2300/400-XXX
1
A8ES
1
WAGO-I/O-SYSTEM 753
WAGO Interface Cables
WAGO Interface Modules
I/O Modules
Item No.
Qt y.
Type
Qt y.
DI
753-430 (x1)
8 DI
706-7753/300-XXX
1
T8ES
1
753-430 (x2)
16 DI
706-7753/301-XXX
1
T16ES
1
753-431 (x1)
8 DI
706-7753/300-XXX
1
T8ES
1
753-431 (x2)
16 DI
706-7753/301-XXX
1
T16ES
1
DO
753-530 (x1)
8 DO
706-7753/300-XXX
1
T8ES/T8S
1
753-530 (x2)
16 DO
706-7753/301-XXX
1
T16ES/T16S
1
For an overview of interface modules, see page 234.
WAGO-I/O-SYSTEM 750
WAGO Interface Cables
WAGO Interface Modules
I/O Modules
Item No.
Qt y.
Type
Qt y.
DI
750-1400
16 DI
706-3057/300-XXX
1
T16ES
1
DO
750-1500
16 DO
706-3057/300-XXX
1
T16ES
1
DI/DO
750-1502
8 DI/8 DO
706-7753/302-XXX
1
T8ES/T8S
1/1
750-1502
8 DI/8 DO
706-3057/300-XXX
1
T16ES
1
For an overview of interface modules, see page 234.
www.wago.com
233
10
Accessories for Automation Technology and Interface Electronic
Product Short Form
WAGO Interface Modules
Type
Short Description
Dimensions (mm) W x H x D
Item No.
DI/DO
T8ES
10-pole, without supply
35 x 48 x 85
289-611
10-pole, with LEDs, 3 conductors
56 x 63 x 85
704-2003
T8S
10-pole, with LEDs, 5 A relay
70 x 65 x 105
704-5003
10-pole, with LEDs, 5 A relay, manual operation
75 x 65 x 105
704-5013
T16ES
20-pole, without supply
47 x 62 x 85
289-614
20-pole, with LEDs, 1 conductor
55 x 50 x 85
704-2004
20-pole, with LEDs, 2 conductors
85 x 50 x 85
704-2024
20-pole, with LEDs, 2 conductors, disconnection
99 x 50 x 85
704-2044
20-pole, with LEDs, 3 conductors
85 x 63 x 85
704-2054
T16S
20-pole, with LEDs, 5 A relay
180 x 50 x 105
704-5004
20-pole, with LEDs, relay socket without relay
180 x 50 x 105
704-5014
20-pole, with LEDs, 5 A relay
111 x 65 x 105
704-5024
20-pole, with LEDs, 5 A relay, fuse
247 x 55 x 105
704-5034
20-pole, with LEDs, 5 A relay, manual operation
121 x 65 x 105
704-5044
20-pole, with LEDs, 5 A relay, disconnection, fuse
240 x 55 x 105
704-5054
20-pole, with LEDs, 5 A (2 u) relay
247 x 50 x 105
704-5064
20-pole, with LEDs, 5 A (1 a) relay, disconnection, fuse
240 x 55 x 105
704-5074
AI/AO
A4ES
15-pole D-sub, 2/4 conductors, disconnection
66 x 50 x 105
704-8012
A8ES
25-pole D-sub, 2/4 conductors, disconnection
92 x 50 x 105
704-8013
WAGO Interface Cables
Type
Item No.
DI/DO
WAGO-753 T8ES
706-7753/300-XXX
See www.wago.com
WAGO-753 T16ES
706-7753/301-XXX
See www.wago.com
WAGO-750 HE T8E8S
706-7753/302-XXX
TSX T16ES
706-3057/300-XXX
S7-300 T16E
706-2300/101-XXX
S7-300 2 x T16E
706-2300/100-XXX
S7-300 T8S
706-2300/201-XXX
S7-300 2 x T16S
706-2300/200-XXX
S7-300 T16ES
706-2300/300-XXX
S7-300 2 x T16ES
706-2300/301-XXX
AI/AO
S7-300 A8E
706-2300/400-XXX
S7-300 A8EI1
706-2300/404-XXX
S7-300 A8EI2
706-2300/406-XXX
S7-300 A4SI
706-2300/500-XXX
S7-300 A8SI
706-2300/502-XXX
Cable Length Overview
Item No.
-XXX
Length
Example
706-2300/201-XXX
-100
1 m
706-2300/201-100
-200
2 m
706-2300/201-200
-300
3 m
706-2300/201-300
System cables upon request:
• SCHNEIDER M340
• GEFANUC 90-30 / ALSPA 80-35
• SCHNEIDER QUANTUM
• ROCKWELL COMPACT LOGIX (1769)
• SCHNEIDER TSX 37 (Micro)
• ROCKWELL CONTROL LOGIX (1756)
• SCHNEIDER TSX 57 (Premium)
www.wago.com
234
1
3
5 ...
1
3
5 ...
2 4
... 50 max.
2
4
6 ...
1
3
5 ...
1
3
5 ...
2 4 ... 50 max.
2
4
6 ...
1
2
3
. . .
37
20
21
22
...
...
...
37
S
1
2
3
...
...
...
...
19
1
1 4 7 ...
64
63
nc
2 5 8 ...
3 6 9 ...
1
2
3
. . .
37
1
2
3
...
...
...
...
19
20
21
22
...
...
...
37
S
2
4
6 ...
1
1
3
5 ...
1
2
3 ...
1
2
3 ...
... 50 max.
26
27
28
...
26
27
28
...
1
2
3 ...
... 50 max.
1
2
3 ...
9
10
10
9
18
1
1
18
8
11
11
8
17
2
2
17
7
12
12
7
16
3
3
16
6
13
13
6
15
4
4
15
5
14
14
5
14
5
5
14
4
15
15
4
13
6
6
13
3
16
16
3
12
7
7
12
2
17
17
2
11
8
8
11
1
18
18
1
X2
X1
X4
X3
10
9
9
10
9
10
10
9
18
1
1
18
8
11
11
8
17
2
2
17
7
12
12
7
16
3
3
16
6
13
13
6
15
4
4
15
5
14
14
5
14
5
5
14
4
15
15
4
13
6
6
13
3
16
16
3
12
7
7
12
2
17
17
2
11
8
8
11
1
18
18
1
X2
X1
X4
X3
10
9
9
10
X5
X3
X1
X6
X4
X2
X19
X10
X0
X12
X11
X2
X1
X4
X3
X14
X13
X19
X10
X0
X15
X16
X12
X11
X5
X6
X2
X1
X7
X8
X4
X3
X17
X18
X14
X13
X9
Accessories for Automation Technology and Interface Electronic
Product Short Form
DIN-Rail-Mount Potential Multiplication Modules,
Interface Modules
288/289 Series
DIN-rail-mount
potential multiplication modules
Interface modules with
D-subminiature male
connector,
for mating connectors
with solder connection
9-pole
289-545
1
15-pole
289-546
1
25-pole
289-547
1
37-pole
289-548
1
50-pole
289-549
1
for mating connectors with
IDC
9-pole
289-540
1
15-pole
289-541
1
25-pole
289-542
1
37-pole
289-543
1
50-pole
289-544
1
Interface modules with
D-subminiature female
connector,
for mating connectors
with solder connection
9-pole
289-555
1
15-pole
289-556
1
25-pole
289-557
1
37-pole
289-558
1
50-pole
289-559
1
for mating connectors with
IDC
9-pole
289-550
1
15-pole
289-551
1
25-pole
289-552
1
37-pole
289-553
1
50-pole
289-554
1
Interface modules with
D-subminiature male
connector
9-pole
289-720
1
15-pole
289-721
1
25-pole
289-722
1
37-pole
289-723
1
Interface modules with
D-subminiature female
connector
289-725
9-pole
1
289-726
15-pole
1
289-727
25-pole
1
289-728
37-pole
1
Interface modules
Terminal strips with CAGE CLAMP
®
(236 Series)
Mounting carrier for DIN-35 rail
0.08
... 2.5 mm
2
28 ... 12 AWG
L
5 ... 6 mm / 0.22 in.
Interface modules
Terminal strips with CAGE CLAMP
®
(736/737 Series)
Mounting carrier for DIN-35 rail
0.08
... 2.5 mm
2
28 ... 12 AWG
L
5 ... 6 mm / 0.22 in.
Potential multiplication
module,
4 potentials, each
with 18 connection points
288-825
1
250 VAC/DC / 12 A
Potential multiplication
module,
4 potentials, each
with one supply and 18 con-
nection points
288-837
1
250 VAC/DC / 12 A
Potential multiplication
module,
4 potential groups,
each with 6 connection
points for positive and
negative potentials
288-867
1
24 VDC / 10 A
Potential multiplication
module,
4 potentials, each
with 24 VDC
with 5 connection points
of 24 V and 5 connection
points of 0 V
288-870/000-030
1
24 VDC / 10 A
Potential multiplication
module,
8 potentials, each
with 24 VDC
with 5 connection points
of 24 V and 5 connection
points of 0 V
288-870/000-040
1
24 VDC / 10 A
Please find the entire product range in our Full Line Catalog.
For additional information, visit www.wago.com.
S: Shield; P: Power jumper contacts
Interface modules with male
connector per DIN 41651 and
multilevel PCB terminal strip
10-pole
289-611
1
14-pole
289-612
1
16-pole
289-613
1
20-pole
289-614
1
26-pole
289-615
1
34-pole
289-616
1
40-pole
289-617
1
50-pole
289-618
1
64-pole
289-619
1
Interface modules with male
connector per DIN 41651 and
single-deck PCB terminal strips
10-pole
289-501
1
14-pole
289-502
1
16-pole
289-503
1
20-pole
289-504
1
26-pole
289-505
1
34-pole
289-506
1
40-pole
289-507
1
50-pole
289-508
1
64-pole
289-509
1
RJ-45 interface modules
Cat. 5
RJ to 4-pole + S
289-174
RJ to 4-pole + S + P
289-178
RJ to 8-pole + S
289-175
RJ to 8-pole + S + P
289-179
RJ + S to RJ + S
289-172
RJ + S + P to RJ + S + P
289-176
RJ + S + P x RJ + S + P
cross-over
289-177
RJ-45 interface module
Cat. 6
RJ to 8-pole + S
289-195
Also available for connectors complying with:
DIN 41612 (types E, F) and DIN 41651
Item No.
Item No.
Item No.
Pack.
Unit
Pack.
Unit
Pack.
Unit
www.wago.com
235
10
210-533
288-602
288-600
288-601
288-620
288-622
288-621
210-533
<
_____
_______
71,2
_____
_______>
<_______________
85
_______________>
<_
25,2
_>
11
12,7
<
<
L2
<_
L3
_>
<
_
L1
_
>
<
>
<
>
<__________________________
100
__________________________>
<___________________________
_
106
____________________________>
<___
25,2
___>
<
15 ,8
>
<_
17,5
_>
<___
L2
___>
<_______
L3
_______>
<
_______
L1
_______>
<__________________________
100
__________________________>
<
____________________________
106
____________________________>
<_
_
17
__
>
<
___
22
_
__>
<____
27
____>
<_________________
70
_________________>
<
__________
49
__________>
<__________________________
1
00
__________________________>
Accessories for Automation Technology and Interface Electronic
Product Short Form
DIN-Rail-Mount PCB Carriers
288 Series
Mounting carrier,
size 1, 85 mm wide,
for DIN-rail mounting of
71.2 mm wide PCBs
Lateral cover, size 1,
low-profile, 6.35 mm thick
288-601
1
Mounting foot for DIN-35 rail
288-602
1
Carrier base, size 2,
1 m long
288-600
1
Phillips screw,
2.9 x 13
210-533
25
2 pcs
per lateral cover; for a module length of 39 mm
or higher; lateral covers must be riveted for smaller
modules.
Rivet length depends on module length; rivets are not
offered by WAGO.
Mounting carrier,
size 2, 106 mm wide,
for DIN-rail mounting of
100 mm wide PCBs
Lateral cover, size 2,
low-profile, 8.75 mm thick
288-621
1
Mounting foot for DIN-35 rail
288-622
1
Carrier base, size 2,
1 m long
288-620
1
Lateral cover, size 2,
high-profile, 8.75 mm thick
288-626
1
Cover, size 2,
1 mm long
288-627
1
Phillips screw,
2.9 x 13
210-533
25
2 pcs
per lateral cover; for a module length of 39 mm
or higher; lateral covers must be riveted for smaller
modules.
Rivet length depends on module length; rivets are not
offered by WAGO
.
Accessories, 288 Series
For technical explanations and abbreviations, see technical section.
Item No.
Item No.
Mounting Carrier, Size 1,
Low-Profile
Mounting Carrier, Size 2,
Low-Profile
Mounting Carrier, Size 2,
High-Profile,
with Cover
Mounting Carrier, Size 2,
High-Profile
Mounting Carrier, Size 2,
Low-Profile
Mounting Carrier, Size 1,
Low-Profile
PCB length:
L1
Base length:
L2 = L1 − 15.8 mm
Mounting carrier length:
L3 = L1 + 2 mm
Cover length:
L4 = L1
Lateral cover, size 2: 8.75 mm thick
Free space between profile and PCB: 5 mm
PCB length:
L1
Base length:
L2 = L1 − 11 mm
Mounting carrier length:
L3 = L1 + 2 mm
Lateral cover, type 1: 6.35 mm thick
Free space between profile and PCB: 5 mm (when using
upper groove)
Pack.
Unit
Pack.
Unit
www.wago.com
236
Accessories for Automation Technology and Interface Electronic
Product Short Form
2-cond. carrier terminal block,
5 mm wide
0.08 ... 2.5 mm
2
/28 ... 14 AWG
L
8 ... 9 mm / 0.33 in.
gray
280-916
100
3-cond. carrier terminal block,
5 mm wide
0.08 ... 2.5 mm
2
/28 ... 14 AWG
L
8 ... 9 mm / 0.33 in.
gray
280-610
100
4-cond. carrier terminal block,
5 mm wide
0.08 ... 2.5 mm
2
/28 ... 14 AWG
L
8 ... 9 mm / 0.33 in.
gray
280-686
100
2-cond. through terminal block,
5 mm wide
0.08 ... 2.5 mm
2
/28 ... 14 AWG
L
8 ... 9 mm / 0.33 in.
gray
280-901
100
3-cond. through terminal block,
5 mm wide
0.08 ... 2.5 mm
2
/28 ... 14 AWG
L
8 ... 9 mm / 0.33 in.
gray
280-681
100
4-cond. through terminal block,
5 mm wide
0.08 ... 2.5 mm
2
/28 ... 14 AWG
L
8 ... 9 mm / 0.33 in.
gray
280-833
100
2-cond. through terminal block,
5 mm wide
side-entry wiring,
0.08 ... 2.5 mm
2
/28 ... 14 AWG
L
8 ... 9 mm / 0.33 in.
gray
280-101
100
2-cond. carrier terminal block,
5.2 mm wide
0.25 ... 2.5 (4) mm
2
/22 ... 12 AWG
L
10 ... 12 mm / 0.43 in.
gray
2002-1661
50
4-cond. carrier terminal block,
5.2 mm wide
0.25 ... 2.5 (4) mm
2
/22 ... 12 AWG
L
10 ... 12 mm / 0.43 in.
gray
2002-1861
50
2-cond. through terminal block,
5.2 mm wide
0.25 ... 2.5 (4) mm
2
/22 ... 12 AWG
L
10 ... 12 mm / 0.43 in.
gray
2002-1201
100
3-cond. through terminal block,
5.2 mm wide
0.25 ... 2.5 (4) mm
2
/22 ... 12 AWG
L
10 ... 12 mm / 0.43 in.
gray
2002-1301
100
4-cond. through terminal block,
5.2 mm wide
0.25 ... 2.5 (4) mm
2
/22 ... 12 AWG
L
10 ... 12 mm / 0.43 in.
gray
2002-1401
100
2-cond. through terminal block,
6.2 mm wide
0.5 ... 4 (6) mm
2
/20 ... 10 AWG
L
11 ... 13 mm / 0.47 in.
gray
2004-1201
50
2-cond. through terminal block,
7.5 mm wide
0.5 ... 6 (10) mm
2
/20 ... 8 AWG
L
13 ... 15 mm / 0.55 in.
gray
2006-1201
50
Multi-purpose operating tool,
for component plugs
2002-116
5
Plug width:
10 mm/0.394 in.
15 mm/0.591 in.
20 mm/0.787 in.
25 mm/0.984 in.
250 V/4 kV/3
6 A (max.)
Plug width:
5 mm/0.197 in.
10 mm/0.394 in.
250 V/4 kV/3
6 A (max.)
Plug width:
5.2 mm/0.205 in.
10.4 mm/0.409 in.
Empty component plugs for carrier terminal blocks
Type 3
280-801
100
2-pole, 5 mm/0.197 in.
wide,
Plug inside dimensions: W/H/D (3.2/15/15) mm
Type 4
280-802
50
2-pole, 10 mm/0.394 in.
wide,
Plug inside dimensions: W/H/D (8.2/15/15) mm
Type 5
280-804
50
4-pole, 10 mm/0.394 in.
wide,
Plug inside dimensions: W/H/D (8.2/15/15) mm
Empty component plug for through terminal blocks
Type 6
280-803
50
2-pole, 10 mm/0.394 in.
wide,
Plug inside dimensions: W/H/D (8.2/15/15) mm
Empty component plugs for carrier terminal blocks,
2002 Series
Type 1
2002-800
100
2-pole, 5.2 mm/0.205 in.
wide
Type 1
2002-810
50
2-pole, 10.4 mm/0.409 in.
wide
Type 1
2002-820
50
4-pole, 10.4 mm/0.409 in.
wide
Empty component plug for through terminal blocks,
2001, 2002, 2004 and 2006 Series
Type 2
2002-880
50
2-pole, 10.4 mm/0.409 in.
wide
Empty component plug housings for terminal blocks
for pluggable modules
Type 7 286-110
1
4-pole, 10 mm/0.394 in.
wide
Type 8 286-111
1
6-pole, 15 mm/0.591 in.
wide
Type 9 286-112
1
8-pole, 20 mm/0.787 in.
wide
Type 10 286-113
1
10-pole, 25 mm/0.984 in.
wide
Empty Component Plug Housings for Building Custom Circuits
280/286/2002 Series
Accessories, 280, 286 and 2002 Series
Terminal blocks for pluggable modules,
with 2-cond. blocks,
polarized,
with orange separator
0.08 ... 2.5 mm
2
/28 ... 14 AWG
L
8 ... 9 mm/0.33 in.
4-pole, 12 mm/0.472 in. wide
280-618
1
6-pole, 17 mm/0.669 in. wide
280-619
1
8-pole, 22 mm/0.866 in. wide
280-638
1
10-pole, 27 mm/1.063 in. wide
280-639
1
Terminal blocks for pluggable modules,
with 4-cond. blocks,
polarized,
with orange separator
0.08 ... 2.5 mm
2
/28 ... 14 AWG
L
8 ... 9 mm/0.33 in.
4-pole, 12 mm/0.472 in. wide
280-608
1
6-pole, 17 mm/0.669 in. wide
280-609
1
8-pole, 22 mm/0.866 in. wide
280-628
1
10-pole, 27 mm/1.063 in. wide
280-629
1
1-cond./1-cond. terminal blocks for pluggable modules,
with orange separator
0.08 ... 4 mm
2
/28 ... 12 AWG
L
8 ... 9 mm/0.33 in.
4-pole, 11.1 mm/0.437 in. wide
769-192/769-319
10
6-pole, 16.1 mm/0.634 in. wide
769-193/769-319
5
8-pole, 21.1 mm/0.831 in. wide
769-194/769-319
5
10-pole, 26.1 mm/1.028 in. wide
769-195/769-319
5
Unlocking pliers,
for removing empty component plug
housing covers
210-492
1
Please find the entire product range in our Full Line Catalog.
For additional information, visit www.wago.com.
Type
6
5
4 3
Type 1
2
Type 10 9 8 7
Type
Item No.
Pack. Unit
Type
Item No.
Pack. Unit
Type
Item No.
Pack. Unit
www.wago.com
237
10
<__________
47,5
__
________>
<________________________
92,5
_______________________>
<____________________
80,5
___________________>
<_____
Ø 1,
8
<_____
Ø 2,
3
<__________
47,5
__
________>
<________________________
92,5
_______________________>
<____________________
80,5
___________________>
<_____
Ø 1,
8
<_____
Ø 2,
3
<__________
47,5
__
________>
<________________________
92,5
_______________________>
<____________________
80,5
___________________>
<_____
Ø 1,
8
<_____
Ø 2,
3
<__________
47,5
__
________>
<________________________
92,5
_______________________>
<____________________
80,5
___________________>
<_____
Ø 1,
8
<_____
Ø 2,
3
Accessories for Automation Technology and Interface Electronic
Product Short Form
Modular Empty Housings
2857 Series
– Overview and Configuration –
Pluggable
picoMAX
®
connections
Fixed
picoMAX
®
connections
Empty slot
... freely selectable for each
connection
point
Housing width:
12.5 mm/0.49 in.
2857-101
2857-102
2857-103
–
Housing width:
22.5 mm/0.89 in.
2857-121
2857-122
2857-123
2857-124
Connection levels
2-2
3-2
3-3
1-1
Jumper slots
2-2
0-2
0-0
2-2
Mixed configuration (fixed/removable/empty slot) upon request.
1. Pre-assembled unit
2. Inserting and soldering the PCB
3. Snapping on side wall
Housing configuration:
Supplied as a pre-assembled unit
1
2
1
2
1
2
3
Connection level
Example of connection level and jumper slot assignment:
Connection levels
3-2
Jumper slots
0-2
Connection level
Jumper slot
2-2 connection levels,
2-2 jumper slots
2857-191/3140-000
3-2 connection levels,
0-2 jumper slots
2857-192/3140-000
3-3 connection levels,
0-0 jumper slots
2857-193/3140-000
1-1 connection levels,
2-2 jumper slots
2857-194/3140-000
Stripboards for installation in 12.5 mm and 22.5 mm empty housings:
【选型】WAGO(万可)综合产品选型指南(1-6册合集简短版)
选型目录:
Company and Product Profile
Rail-Mounted Terminal Block Systems
Device Terminal Blocks and Installation Connectors
Pluggable Connectors
PCB Terminal Blocks
WINSTA Pluggable Connection System
Automation Technology
Power Supplies
Interface Electronic
Current and Energy Measurement Technology
Accessories for Automation Technology and Interface Electronic
Marking Systems, Tools, Measurement Devices and Mounting Accessories
Technical Section
Index
您正在使用的浏览器版本过低,将不能正常浏览产品选型内容。
- 收藏