WECO Screw/solder terminal strips Selection Guide

of 9
Europe type connectors
选型目录:
Europe type connectors Overview
WECO Group
RoHS/Household Appliance Standard
Socket terminal strips
Plug-in terminal strip
Screw/solder terminal strips
Screw/plug terminal strips
Tab and screw connector blocks
Plug connectors
Accessories
Marking & Packaging
Moulding colours/Screws
Customer Designed Solutions
Soldering processes
Technical Information
Index
51
Screw/solder terminal strips
The following pages list our range of
screw/solder terminal strips
.
They have a scr
ew connection and their
solder connection is formed as a solder
tag
.
Our scr
ew/solder terminal strips are availa-
ble in 3,5 mm, 5 mm, 8 mm and 10 mm
pitch
.
Due to the lateral mounting flanges, large
cr
oss-sections and compact size, they are
suitable for every application
All versions use captive screws that are
ready to be wired and secured against
self-loosening
.
V
ersions of the 300 series can also be
combined with plug-in terminal strips
302-SV(-DS) and 322-SV(-DS)
.
Their pins
are pushed into the sockets and then
screw-connected
.
52
Screw/solder terminal strip
302-LF-DS
Screw/solder tag connection
09.13
W ECO Contact GmbH - www.wecogroup.com
The screw/solder terminal strip 302-LF-DS in 8 mm pitch is available with 1 to 12
poles. Due to the small pole spacing, it is well suited for applications where space
is limited.
The solder tag is formed as a wire protector. The wire protection reliably prevents
damage to multi-wire flexible conductors by the turning screw.
The screws are ready to be wired, secured against self-loosening and captive.
These strips can be combined with plug-in terminal strip 302-SV by plugging the
pins into the sockets and screwing them tight.
These terminals strips can be screw-mounted on a substrate.
Part Numbers
No. of
poles
302-LF-DS
Length
PU
2
36.820.029
15,00
500
3
37.820.029
23,00
200
4
38.820.029
31,00
100
5
39.820.029
39,00
100
6
40.820.029
47,00
80
7
41.820.029
55,00
60
8
42.820.029
63,00
60
12
46.820.029
94,00
40
further number of poles on request
General Information
Pitch
8 mm
No. of poles
1 - 12
Usable with
302-SV(-DS)
Technical Data
Clamping Range
solid / flexible / AWG
0,34 - 2,5 mm² / 0,34 - 1,5 mm² / 22 - 14 AWG
Rated Cross Section
1,5 mm²
Wire Stripping Length
5 mm ± 0,5 mm
Overvoltage Category
III
III
II
Pollution Severity Level
3
2
2
Rated Voltage
320 V
320 V
630 V
Rated Impulse Voltage
4 kV
4 kV
4 kV
Rated Insulation Voltage
450 V acc. to EN 60998-1
Rated Current
6 A
Torque
0,4 Nm
Material
Moulding
PA, natural, V-2
Comparative Tracking Index
CTI
600
Insulating Group
I
Temperature Range
-40°C up to 100°C
Terminal Body
Nickel plated brass
Screw
M2,6; zinc plated steel, blue passivated
Wire protector
Tin plated tin bronze
Approvals
Curr ent
Voltage
Group
AW G
Nm
6
300
B,D
20 - 14
0,4
10
300
B,D,E
26 - 14
0,4
Options / Accessories
Marking options on the screw guides
Jumper 302-J
Insulation receptacles ISO-110
Screws made out of brass
Moulding made of special polyamide for e.g. household appliances
Up to 26 poles possible
With pegs at the base for saving assembly time
53
Screw/solder terminal strip
302-NLF-DS
Screw/solder tag connection, low profile version
09.13
W ECO Contact GmbH - www.wecogroup.com
The screw/solder terminal strip 302-NLF-DS, lower version, is available in 8 mm
pitch with 1 to 12 poles.
Due to the small pole spacing, it is well suited for applications where space is
limited.
The solder tag is formed as a wire protector. The wire protection reliably prevents
damage to multi-wire flexible conductors by the turning screw.
The screws are ready to be wired, secured against self-loosening and captive.
The “N”-variant only differs from the standard 302-LF-DS version by the 12 mm
overall height (i.e. the moulding height is 3 mm lower). Note the shortened
clearance and creepage distances.
These strips can be combined with plug-in 302-NSV terminal strips by plugging the
pins into the sockets and screwing them tight.
These terminals strips can be screw-mounted on a substrate.
Part Numbers
No. of
poles
302- NLF-DS
Length
PU
1
51.820.043
7,00
1000
2
52.820.043
15,00
500
3
53.820.043
23,00
200
4
54.820.043
31,00
100
5
55.820.043
39,00
100
6
56.820.043
47,00
80
7
57.820.043
55,00
60
8
58.820.043
63,00
60
9
59.820.043
71,00
50
10
60.820.043
79,00
50
11
61.820.043
87,00
40
12
62.820.043
94,00
40
General Information
Pitch
8 mm
No. of poles
1 - 12
Usable with
302-NSV(-DS)
Technical Data
Clamping Range
solid / flexible / AWG
0,34 - 2,5 mm² / 0,34 - 1,5 mm² / 22 - 14 AWG
Rated Cross Section
1,5 mm²
Wire Stripping Length
5 mm ± 0,5 mm
Overvoltage Category
III
III
II
Pollution Severity Level
3
2
2
Rated Voltage
250 V
320 V
630 V
Rated Impulse Voltage
4 kV
4 kV
4 kV
Rated Insulation Voltage
250 V acc. to EN 60998-1
Rated Current
6 A
Torque
0,4 Nm
Material
Moulding
PA, natural, V-2
Comparative Tracking Index
CTI
600
Insulating Group
I
Temperature Range
-40°C up to 100°C
Terminal Body
Nickel plated brass
Screw
M2,6; zinc plated steel, blue passivated
Wire protector
Tin plated tin bronze
Approvals
Curr ent
Voltage
Group
AW G
Nm
10
300
B,D,E
26 - 14
0,4
Options / Accessories
Marking options on the screw guides
Jumper 302-J
Insulation receptacles ISO-110
Screws made out of brass
Moulding made of special polyamide for e.g. household appliances
54
Screw/solder terminal strip
321-LFS(-DS)
Screw/solder tag connection, side of solder tag closed, pottable
09.13
W ECO Contact GmbH - www.wecogroup.com
pottable
The screw/solder terminal strip 321-LFS in 10 mm pitch was designed for larger
cross-sections than version 302-LF-DS. It is available with 1 to 12 poles.
Mouldings of this type are encapsulated on the solder tag side and therefore
particularly well suited for potting.
Socket and solder tag are manufactured in one piece.
The screws are ready to be wired, secured against self-loosening and captive.
These strips can be combined with plug-in terminal strip 322-SV by plugging the
pins into the sockets and screwing them tight.
The wire protector of the “DS”-version reliably prevents damage to multi-wire
flexible conductors by the turning screw.
These terminals strips can be screw-mounted on a substrate.
Part Numbers
No. of
poles
321- LFS
321-LFS-DS
Length
PU
1
11.821.020
31.821.020
8,00
3000
2
12.821.020
32.821.020
18,00
1000
3
13.821.020
33.821.020
28,00
200
4
14.821.020
34.821.020
38,00
200
5
15.821.020
35.821.020
48,00
100
6
16.821.020
36.821.020
58,00
100
7
17.821.020
37.821.020
68,00
70
8
18.821.020
38.821.020
78,00
70
9
19.821.020
39.821.020
88,00
60
10
20.821.020
40.821.020
98,00
50
11
21.821.020
41.821.020
108,00
50
12
22.821.020
42.821.020
117,00
50
further number of poles on request
General Information
Pitch
10 mm
No. of poles
1 - 12
Technical Data
Clamping Range
solid / flexible / AWG
without wire protector
0,75 - 6 mm² / 0,75 - 4 mm² / 18 - 12 AWG
with wire protector
0,5 - 4 mm² / 0,5 - 2,5 mm² / 20 - 12 AWG
Rated Cross Section
2,5 mm²
Wire Stripping Length
7 mm ± 0,5 mm
Overvoltage Category
III
III
II
Pollution Severity Level
3
2
2
Rated Voltage
400 V
630 V
1000 V
Rated Impulse Voltage
6 kV
6 kV
6 kV
Rated Insulation Voltage
450 V acc. to EN 60998-1
Rated Current
26 A
Torque
0,5 Nm
Material
Moulding
PA, natural, V-2
Comparative Tracking Index
CTI
600
Insulating Group
I
Temperature Range
-40°C up to 100°C
Terminal Body
Tin plated brass
Screw
M3; zinc plated steel, blue passivated
Wire protector
Tin plated tin bronze
Approvals
Curr ent
Voltage
Group
AW G
Nm
20
10
300
300
B
D,E
26-10 [1]
26-10 [1]
0,51
0,51
[1] for 321-LFS-DS: 26-12 AWG
Options / Accessories
Marking options on the screw guides
Cover caps A-323 und base plate B-323 for additional contact protection
Insulation receptacles ISO-110
Moulding made of special polyamide for e.g. household appliances
Up to 16 poles possible
55
Screw/solder terminal strip
322-LFS(-DS)
Screw/solder tag connection
09.13
W ECO Contact GmbH - www.wecogroup.com
The screw/solder terminal strip 322-LFS in 10 mm pitch was designed for larger
cross-sections than version 302-LF-DS. It is available with 1 to 12 poles.
Mouldings of this type are open on the solder tag side but they can be connected
safe-to-touch as 2- and 3-pole version with cover caps A-323 and base plates
B-323. This will extend the creepage distance to the mounting surface.
Socket and solder tag are manufactured in one piece.
The screws are ready to be wired, secured against self-loosening and captive.
These strips can be combined with plug-in terminal strip 322-SV by plugging the
pins into the sockets and screwing them tight.
The wire protector of the “DS”-version reliably prevents damage to multi-wire
flexible conductors by the turning screw.
These terminals strips can be screw-mounted on a substrate.
Part Numbers
No. of
poles
322- LFS
322-LFS-DS
Length
PU
1
10.821.002
23.821.002
8,00
3000
2
11.821.002
24.821.002
18,00
1000
3
12.821.002
25.821.002
28,00
1000
4
13.821.002
26.821.002
38,00
1000
5
14.821.002
27.821.002
48,00
500
6
15.821.002
28.821.002
58,00
140
7
16.821.002
29.821.002
68,00
90
8
17.821.002
30.821.002
78,00
90
9
18.821.002
31.821.002
88,00
80
10
19.821.002
32.821.002
98,00
70
11
20.821.002
33.821.002
108,00
70
12
21.821.002
34.821.002
117,00
70
General Information
Pitch
10 mm
No. of poles
1 - 12
Technical Data
Clamping Range
solid / flexible / AWG
without wire protector
0,5 - 4 mm² / 0,5 - 2,5 mm² / 20 - 12 AWG
with wire protector
0,34 - 2,5 mm² / 0,34 - 2,5 mm² / 22 - 14 AWG
Rated Cross Section
2,5 mm²
Wire Stripping Length
7 mm ± 0,5 mm
Overvoltage Category
III
III
II
Pollution Severity Level
3
2
2
Rated Voltage
320 V
320 V
630 V
Rated Impulse Voltage
4 kV
4 kV
4 kV
Rated Insulation Voltage
450 V acc. to EN 60998-1
Rated Current
24 A
Torque
0,5 Nm
Material
Moulding
PA, natural, V-2
Comparative Tracking Index
CTI
600
Insulating Group
I
Temperature Range
-40°C up to 100°C
Terminal Body
Tin plated brass
Screw
M3, zinc plated steel, blue passivated
Wire protector
Tin plated tin bronze
Approvals
Curr ent
Voltage
Group
AW G
Nm
10
300
B,D
20 - 12
0,51
20
10
300
300
B
D,E
22-10 [1]
22-10 [1]
0,51
0,51
[1] for 322-LFS-DS: 26 - 12 AWG
Options / Accessories
Marking options on the screw guides
Cover caps A-323 und base plate B-323 for additional contact protection
Insulation receptacles ISO-110
Lowered solder tag for larger creepage distances to the screw
Solder tag with two holes
Moulding made of special polyamide for e.g. household appliances
56
Screw/solder terminal strip
931-A-LFDS
Screw/solder tag connection
08.12
W ECO Contact GmbH - www.wecogroup.com
''no flame'' after glow-wire test according to
Household Appliance DIN EN/IEC 60335-1
The screw/solder terminal strip 931-A-LFDS with a pitch of 3,5 mm is available in
2- to 12-pole design.
Due to the small pitch, it requires only little mounting space and is therefore well
suited for low-voltage applications.
The solder tag is formed as a wire protector. The wire protection reliably prevents
damage to multi-wire flexible conductors by the turning screw.
The moulding can also be mounted using the lateral flanges.
Part Numbers
No. of
poles
931- A-LFD S
Length
PU
2
20.870.442
14,00
250
3
20.870.443
17,50
100
4
20.870.444
21,00
100
5
20.870.445
24,50
100
6
20.870.446
28,00
100
7
20.870.447
31,50
100
8
20.870.448
35,00
100
9
20.870.449
38,50
100
10
20.870.450
42,00
100
11
20.870.451
45,50
100
12
20.870.452
49,00
100
General Information
Pitch
3,5 mm
No. of poles
2 - 12
Technical Data
Clamping Range
solid / flexible / AWG
0,34 - 1,5 mm² / 0,34 - 1 mm² / 22 - 16 AWG
Rated Cross Section
1 mm²
Wire Stripping Length
5 mm ± 0,5 mm
Overvoltage Category
III
III
II
Pollution Severity Level
3
2
2
Rated Voltage
100 V
160 V
320 V
Rated Impulse Voltage
2,5 kV
2,5 kV
2,5 kV
Rated Insulation Voltage
130 A acc. to EN 60998-1
Rated Current
4 A
Torque
0,25 Nm
Material
Moulding
PA, grey, V-0
Comparative Tracking Index
CTI
600
Insulating Group
I
Temperature Range
-40°C up to 100°C
Terminal Body
Nickel plated brass
Screw
M2; zinc plated steel, blue passivated
Wire protector
Tin plated tin bronze
Approvals
Curr ent
Voltage
Group
AW G
Nm
10
300
B
26 - 16
0,23
10
300
B
26 - 16
0,2
Options / Accessories
Consecutive numbering
Special marking according to drawing
Self-adhesive marking strip BST-3,50
Larger number of poles
57
Screw/solder terminal strip
951-A-LFDS
Screw/solder tag connection
01.14
W ECO Contact GmbH - www.wecogroup.com
''no flame'' after glow-wire test according to
Household Appliance DIN EN/IEC 60335-1
The screw/solder terminal strip 951-A-LFDS with a pitch of 5 mm is available in 2-
to 12-pole design.
It requires only little mounting space and is well suited for low-voltage applications.
The solder tag is formed as a wire protector. The wire protection reliably prevents
damage to multi-wire flexible conductors by the turning screw.
The moulding can also be mounted using the lateral flanges.
Part Numbers
No. of
poles
951- A-LFD S
Length
PU
2
20.871.252
20,00
250
3
20.871.253
25,00
250
4
20.871.254
30,00
200
5
20.871.255
35,00
100
6
20.871.256
4000
100
7
20.871.257
45,00
100
8
20.871.258
50,00
100
9
20.871.259
55,00
100
10
20.871.260
60,00
50
11
20.871.261
65,00
50
12
20.871.262
70,00
50
General Information
Pitch
5 mm
No. of poles
2 - 12
Technical Data
Clamping Range
solid / flexible / AWG
0,34 - 2,5 mm² / 0,34 - 2,5 mm² / 22 - 14 AWG
Rated Cross Section
1,5 mm²
Wire Stripping Length
6 mm ± 0,5 mm
Overvoltage Category
III
III
II
Pollution Severity Level
3
2
2
Rated Voltage
160 V
160 V
320 V
Rated Impulse Voltage
2,5 kV
2,5 kV
2,5 kV
Rated Insulation Voltage
130 V acc. to EN 60998-1
Rated Current
6 A
Torque
0,4 Nm
Material
Moulding
PA, grey, V-0
Comparative Tracking Index
CTI
600
Insulating Group
I
Temperature Range
-40°C up to 100°C
Terminal Body
Nickel plated brass
Screw
M2,6; zinc plated steel, blue passivated
Wire protector
Tin plated tin bronze
Approvals
Curr ent
Voltage
Group
AW G
Nm
15
300
B
26 - 14
0,4
15
300
B
26 - 14
0,4
Options / Accessories
Consecutive numbering
Special marking according to drawing
Self-adhesive marking strip BST-5,00
Larger number of poles
Europe type connectors
选型目录:
Europe type connectors Overview
WECO Group
RoHS/Household Appliance Standard
Socket terminal strips
Plug-in terminal strip
Screw/solder terminal strips
Screw/plug terminal strips
Tab and screw connector blocks
Plug connectors
Accessories
Marking & Packaging
Moulding colours/Screws
Customer Designed Solutions
Soldering processes
Technical Information
Index

您正在使用的浏览器版本过低,将不能正常浏览产品选型内容。

  • 收藏
平台客服
服务热线

联系我们

954668/400-830-1766(工作日 9:00-18:00)

service@sekorm.com

投诉与建议

E-mail:claim@sekorm.com

商务合作

E-mail:contact@sekorm.com

收藏
收藏当前页面