WAGO Special Power Supplies Selection Guide

of 9
WAGO Power Supplies
选型目录:
Power Supplies Overview
1-Phase Power Supplies
3-Phase Power Supplies
Special Power Supplies
Circuit Protection product
DC/DC Converters
UPS-Charger and Controllers and Capacitive Buffer Modules
Redundancy Modules
Energy Measurement Technology
Potential Distribution Blocks
Accessories and Tools
Indexes
www.wago.com
L
N
DC+
DC–
WAGO Power Supplies
Section 3 | Special WAGO Power Supplies
Switched-mode power supply; 1-phase; 24 VDC output voltage; 4 A output current; PowerBoost
787 Series
Switched-mode power supply; 1-phase;
24 VDC output voltage; 4 A output current; PowerBoost
Item No.
PU
787-6716
1
Features:
Switched-mode power supply with PowerBoost
Low-profile, compact design
Extremely robust, fully encapsulated housing (IP67)
Active power factor correction
High efficiency up to 92.3%
Ambient temperature up to 85°C
Suitable for both parallel and series operation
Input
Phases
1
Nominal input voltage U
i nom
100 ... 240 VAC/VDC
Input voltage range
90 ... 265 VAC/VDC
Nominal mains frequency range
47 ... 63.6 Hz; 0 Hz
Input current I
i
≤ 0.5 A (250 VAC); ≤ 1.1 A (100 VAC)
Inrush current
≤ 9 A
Power factor
≥ 0.98
Power factor correction (PFC)
Active
Mains failure hold-up time
≥ 45 ms
Output
Nominal output voltage U
o nom
24 VDC
Output voltage range
±2 %
Nominal output current I
o nom
4 A
Nominal output power
96 W
Residual ripple
≤ 100 mV (peak-to-peak); ≤ 20 mV (rms)
Overload behavior
Constant current
PowerBoost
6 ADC (5 s; without voltage drop)
Signaling and communication
Signaling
1 x LED DC OK (green); 1 x Overload LED (red)
Operation status indicator
Green LED (24 VDC OK); Red LED (overload)
Efficiency/power losses
Power loss P
l
≤ 1 W; ≤ 7.9 W (nominal load)
Efficiency (typ.)
92.3 % (230 VAC)
Circuit protection
Internal fuse
T 6.3 A
Backup fusing (recommended)
Circuit breaker: 4 ... 20 A; Characteristic: C; T 20 A in
building installations
Safety and protection/Environmental requirements
Protection class/Protection type
I / IP67
Overvoltage protection; secondary
≤ 30 VDC (per IEC 61131)
Short-circuit-protected
Yes
Parallel/series operation
3 devices (max.)/2 devices (max.)
MTBF
> 960,000 h
Ambient temperature (operation at U
N
)
-40 ... +85 °C
Ambient temperature (storage)
-40 ... +85 °C
Relative humidity
4 ... 100 %
Derating
-3.84 W/K (> 60 °C)
Connection data
Connection type 1
Input
Connection technology
7/8"; 3-pole plug
Connection type 2
Output
Connection technology 2
7/8"; 5-pole socket
Physical data/Mechanical data/Material data
Width x Height x Depth
111 x 141 x 54 mm / 4.37 x 5.55 x 2.123 inches
Mounting type
Screw mount
Weight
1100 g
Standards and specifications
Conformity marking
CE
Standards/specifications
EN 61010-1; EN 61010-2-201; EN 61204; UL 508
112
3
www.wago.com
WAGO Power Supplies
Section 3 | Special WAGO Power Supplies
Accessories for IP67 Power
Supply Cable
787 Series
Supply cable, pre-assembled, 7/8 inch; 7/8 inch; 3-pole;
Socket, straight
Length
Item No.
PU
3 m
787-6716/9310-030
1
5 m
787-6716/9310-050
1
10 m
787-6716/9310-100
1
Supply cable, pre-assembled, 7/8 inch; 7/8 inch; 5-pole;
Plug, straight
Length
Item No.
PU
1,5 m
787-6716/9510-015
1
3 m
787-6716/9510-030
1
5 m
787-6716/9510-050
1
Operating data
Operating voltage
600 VAC/VDC
Operating current
9 A
Safety and protection/Environmental requirements
Rated surge voltage
4 kV
Protection type
IP67
Ambient temperature (operation at U
N
)
-25 ... +80 °C
Connection data
Sheathed cable diameter
7.4 mm
Features:
7/8“ screw connection: Industry-proven connection
technology for a large selection of different conductors
High protection class for safe field applications
Vibration- and shock-resistant via integrated locking
mechanism
PUR coating
Similar to pictured device
3/L2
/N
1/PE
7/8“ s
ock
et
1 gr
een
2 black
3 white
3/PE
2/-
1/-
4/+
5/+
7/8“ plug
1 whit
e
2 re
d
3 gr
een
4 or
ange
5 black
113
3
www.wago.com
WAGO Power Supplies
Section 3 | Special WAGO Power Supplies
Operating data
Operating voltage
600 VAC/VDC
Operating current
9 A
Safety and protection/Environmental requirements
Rated surge voltage
4 kV
Protection type
IP67
Ambient temperature (operation at U
N
)
-25 ... +80 °C
Connection data
Sheathed cable diameter
7.4 mm
Accessories for IP67 Power
Pluggable Connector
787 Series
Features:
7/8“ screw connection: Industry-proven connection
technology for a large selection of different conductors
High protection class for safe field applications
Vibration- and shock-resistant via integrated locking
mechanism
PUR coating
Similar to pictured device
Pluggable connector, 7/8 inch; 3-pole; Socket, angled
Pluggable connector, 7/8 inch; 3-pole; Plug, straight
Item No.
PU
Item No.
PU
787-6716/9400-000
1
787-6716/9100-000
1
2
1
3
7/8“ s
ock
et
3
1
2
7/8“ plug
114
3
www.wago.com
WAGO Power Supplies
Section 3 | Special WAGO Power Supplies
Accessories for IP67 Power
Pluggable Connector
787 Series
Pluggable connector, 7/8 inch; 5-pole; Plug, straight
Pluggable connector, 7/8 inch; 5-pole; Plug, angled
Pluggable connector, 7/8 inch; 5-pole; Socket, straight
Item No.
PU
Item No.
PU
Item No.
PU
787-6716/9500-000
1
787-6716/9600-000
1
787-6716/9700-000
1
Pluggable connector, 7/8 inch; 5-pole; Socket, angled
Pluggable connector, 7/8 inch; 3-pole
Pluggable connector, 7/8 inch; 3-pole; Socket, straight
Item No.
PU
Item No.
PU
Item No.
PU
787-6716/9800-000
1
787-6716/9000-1000
1
787-6716/9300-000
1
3
2
1
4
5
7/8“ plug
3
2
1
4
5
7/8“ plug
2
1
4
3
5
7/8“ s
ock
et
2
1
4
3
5
7/8“ s
ock
et
3
1
2
2
1
3
2
1
3
7/8“ s
ock
et
7/8“ plug
7/8“ s
ock
et
2
1
3
7/8“ s
ock
et
115
3
www.wago.com
AC
110 V
N
AC
230 V
AC
12 V
AC
24 V
AC
WAGO Power Supplies
Section 3 | Special WAGO Power Supplies
Transformer power supply; Input voltage: 230 VAC; Output voltage: 12 ... 24 VAC;
Output power: 40 VA
787 Series
Transformer power supply; Input voltage: 230 VAC;
Output voltage: 12 ... 24 VAC; Output power: 40 VA
Item No.
PU
787-974
1
Features:
Maintenance-free, DIN-rail-mount safety transformer for
12/24 VAC
Center tap-off modules provide variable input/output
voltage.
Enables brief performance peaks
Peak output power of 45 VA for 1 min/h
Input
Phases
1
Nominal input voltage U
i nom
1 x 115 VAC; 230 VAC
Input voltage range
1 x 0 ... 230 VAC
Nominal mains frequency range
50 ... 60 Hz
Output
Nominal output voltage U
o nom
12 / 24 VAC
Nominal output current I
o nom
3.3 A (115 VAC); 1.67 A (230 VAC)
Overload behavior
Safety fuse in the primary circuit
Efficiency/power losses
Power loss P
l
≤ 0.6 W
Circuit protection
Internal fuse
T 1.25 A / 250 VAC; T 0.63 A / 250 VAC
Safety and protection/Environmental requirements
Isolation voltage (AC)
4.2 kVAC
Protection class/Protection type
II / IP20; per EN 60529
Overvoltage category
III
Pollution degree
2
Short-circuit-protected/open-circuit-proof
Yes/Yes
Parallel/series operation
No/Yes (with identical power supply)
Ambient temperature (operation at U
N
)
-25 ... +55 °C
Ambient temperature (storage)
-25 ... +85 °C
Relative humidity
≤ 90%
Connection data
Connection technology
CAGE CLAMP®
Input/Output (solid/fine-stranded/AWG)
0.08 ... 2.5 mm² / 0.08 ... 2.5 mm² / 28 ... 12 AWG
Physical data/Mechanical data/Material data
Width x Height x Depth from upper-edge of DIN-rail
126 x 90 x 54 mm / 4.961 x 3.543 x 2.126 inches
Mounting type
DIN-35 rail
Weight
955.6 g
Standards and specifications
Conformity marking
CE
Standards/specifications
UL 5085; EN 61558-2-6
116
3
www.wago.com
AC
110 V
N
AC
230 V
AC
12 V
AC
24 V
AC
WAGO Power Supplies
Section 3 | Special WAGO Power Supplies
Transformer power supply; Input voltage: 230 VAC; Output voltage: 12 ... 24 VAC;
Output power: 63 VA
787 Series
Transformer power supply; Input voltage: 230 VAC;
Output voltage: 12 ... 24 VAC; Output power: 63 VA
Item No.
PU
787-976
1
Features:
Maintenance-free, DIN-rail-mount safety transformer for
12/24 VAC
Center tap-off modules provide variable input/output
voltage.
Enables brief performance peaks
Peak output power of 70 VA for 1 min/h
Input
Phases
1
Nominal input voltage U
i nom
1 x 115 VAC; 230 VAC
Input voltage range
1 x 0 ... 230 VAC
Nominal mains frequency range
50 ... 60 Hz
Output
Nominal output voltage U
o nom
12 / 24 VAC
Nominal output current I
o nom
5.2 A (115 VAC); 2.6 A (230 VAC)
Overload behavior
Safety fuse in the primary circuit
Efficiency/power losses
Power loss P
l
≤ 0.8 W
Circuit protection
Internal fuse
T 2 A / 250 VAC; T 1.6 A / 250 VAC
Safety and protection/Environmental requirements
Isolation voltage (AC)
4.2 kVAC
Protection class/Protection type
II / IP20; per EN 60529
Overvoltage category
III
Pollution degree
2
Short-circuit-protected/open-circuit-proof
Yes/Yes
Parallel/series operation
No/Yes (with identical power supply)
Ambient temperature (operation at U
N
)
-25 ... +55 °C
Ambient temperature (storage)
-25 ... +85 °C
Relative humidity
≤ 90%
Connection data
Connection technology
CAGE CLAMP®
Input/Output (solid/fine-stranded/AWG)
0.08 ... 2.5 mm² / 0.08 ... 2.5 mm² / 28 ... 12 AWG
Physical data/Mechanical data/Material data
Width x Height x Depth from upper-edge of DIN-rail
144 x 90 x 54 mm mm / 5.669 x 3.543 x 2.126 inches
Mounting type
DIN-35 rail
Weight
1200 g
Standards and specifications
Conformity marking
CE
Standards/specifications
UL 5085; EN 61558-2-6
117
3
www.wago.com
L
DC+
DC–
Sig+
Sig–
N
WAGO Power Supplies
Section 3 | Special WAGO Power Supplies
Switched-mode power supply; 1-phase; Output voltage: 22 VDC; 1 A output current
787 Series
Switched-mode power supply; 1-phase;
Output voltage: 22 VDC; 1 A output current
Item No.
PU
787-914
1
Features:
Power supply for small loads that operate at a variable
input voltage
The output voltage can be adjusted linearly by hand or
via an analog voltage signal (0 ... 10 V) in the range from
12 to 22 V, e.g., for automatically controlling fan speed in
control cabinets.
Flat design allows installation in confined spaces.
Variable mounting options for space-saving installation,
e.g., in recesses
Input
Nominal input voltage U
i nom
100 ... 240 VAC
Input voltage range
90 ... 264 VAC; 130 ... 373 VDC
Nominal mains frequency range
47 ... 63 Hz; 0 Hz
Input current I
i
≤ 0.6 A
Inrush current
≤ 18 A
Power factor
≥ 0.45
Power factor correction (PFC)
Not required
Mains failure hold-up time
≥ 15 ms
Output
Nominal output voltage U
o nom
22 VDC
Output voltage range
12 ... 22 VDC (adjustable by hand or via signal input)
Nominal output current I
o nom
0.8 A (< 110 VAC); 1 A (110 ... 240 VAC)
Residual ripple
≤ 100 mV (peak-to-peak)
Overload behavior
Constant power (in overload range: 1.05 ... 1.7 x I
o nom
);
Hiccup in the event of a short circuit or permanent
overload
Signaling and communication
Signaling
1 x Status indication LED (green);
1 x Signal input (10 VDC)
Operation status indicator
Green LED (U
o
)
Input signal (voltage)
0 ... 10 V
Input impedance
10 kΩ
Efficiency/power losses
Power loss P
l
≤ 0.8 W
Power loss (max.) Pl (max.)
4 W
Efficiency (typ.)
84 % (230 VAC); 80 % (110 VAC)
Circuit protection
Internal fuse
1 A / 250 VAC
Backup fusing (recommended)
Circuit breaker: B6, C4 or higher
Safety and protection/Environmental requirements
Protection class/Protection type
II / IP20; per EN 60529
Reverse voltage protection
Yes (Signal input)
Pollution degree
2
Transient suppression (primary)
Varistor
Overvoltage protection; secondary
Yes (signal input) ≤ 31 VDC (output; in the event of a fault)
Short-circuit-protected/open-circuit-proof
Yes/Yes
Parallel/series operation
Yes/Yes
MTBF
> 500,000 h (at 25 °C per IEC 61709)
Ambient temperature (operation at U
N
)
-20 ... +60 °C
Ambient temperature (storage)
-25 ... +75 °C
Relative humidity
20 ... 90 % (no condensation permissible)
Derating
−2.47 %/K (> 45 °C)
Connection data
Connection technology
CAGE CLAMP®
Solid/Fine-stranded/AWG
0.08 ... 2.5 mm² / 0.08 ... 2.5 mm² / 28 ... 12 AWG
Physical data/Mechanical data/Material data
Width x Height x Depth
45 x 138 x 35 mm mm / 1.77 x 5.433 x 1.38 inches
Note (dimensions)
Height: 156 mm (with fastening clips)
Mounting type
DIN-35 rail; Screw mount
Weight
160 g
Standards and specifications
Conformity marking
CE
Standards/specifications
UL 60950; EN 61204-3; EN 62368-1; EN 61000-6-3
118
3
WAGO Power Supplies
选型目录:
Power Supplies Overview
1-Phase Power Supplies
3-Phase Power Supplies
Special Power Supplies
Circuit Protection product
DC/DC Converters
UPS-Charger and Controllers and Capacitive Buffer Modules
Redundancy Modules
Energy Measurement Technology
Potential Distribution Blocks
Accessories and Tools
Indexes

您正在使用的浏览器版本过低,将不能正常浏览产品选型内容。

  • 收藏
服务热线

联系我们

954668/400-830-1766(工作日 9:00-18:00)

service@sekorm.com

投诉与建议

E-mail:claim@sekorm.com

商务合作

E-mail:contact@sekorm.com

收藏
收藏当前页面