Devcon Elevated Temperature, Wear-resistant Coatings Selection Guide
Wear & Abrasion Solutions
选型目录：
Product Technologies
Wearing-resistant, Abrasion-resistant Coatings
Elevated Temperature, Wear-resistant Coatings
Belting & Rubber Repair
Corrosion Repair Compounds
Metal Repair Epoxies
Crusher Backing Compound and Concave Sealing
Surface Preparation
Agency Approvals
Product Index
8
9
Elevated Temperature,
Wear-resistant Coatings
Innovative wear-resistant epoxy coating that is designed to protect
equipment against high temperature erosion, corrosion and abrasion.
Long-lasting protection in both wet and dry environments upto 300°F/
148°C. Room temperature cure eliminates the need for oven bake
cure. Trowelable, non-sag putty. Smooth with water.
Smooth with water
Easy to apply
Easy to mix
Devcon
®
Wear Guard™ 300RTC
Alumina ceramic bead-filled epoxy system with
outstanding wear resistance for high temperature environments.
•
Withstands elevated service temperatures, wet and dry conditions, up to 300°F / 148°C
•
Room temperature cure eliminates need for post-bake cure
•
Sag-free application
•
Excellent chemical resistance
•
Smooth with water
•
Easy to mix and apply
•
Low exothermic reaction
Item #
Size:
11430
30 lb
Typical Properties
Color
Blue
Mix Ratio by Weight
2:1
Mixed Viscosity
Putty
Functional Cure
8 - 10 Hours
Pot Life
50 - 70 Minutes
Compressive Strength
12,500 psi (86.18 MPa)
Coverage
50 in
2
/ lb (711.2 cm
2
/
kg) @ 0.25”
Cured Hardness
85 D
Specific volume inches/
pound
2.2
Coverage / lb
5.2 ft.lb./in.(2)
Cured Hardness
82 Shore D
Cured Shrinkage inch/
inch
.00054
Adhesive Tensile shear,
psi
600 psi @ 300°F / 150°C
Compressive Strength,
psi
12,500
Flexural Strength, psi
5,000
Coefficient of thermal
expansion x 10
-6
43.6
Dielectric Constant
3.3
Maximum continuous
dry service temp.
300°F / 150°C
Maximum continuous
wet service temp.
300°F / 150°C
Devcon
®
Flexane
®
High Performance
Putty
Trowelable lining for maximum protection against
abrasion, gouging and impact.
•
Cures to a tough (tear strength 400 pli),
resilient rubber compound (Hardness 78
Shore A)
•
Bonds to metal, rubber, wood, fiberglass,
and concrete
Item #
Size:
15330
1 lb
Devcon
®
Flexane
®
Brushable
High-performance brushable urethane for
protection against abrasion and impact.
•
Excellent for repairing/coating
rubber-lined pumps, tanks and valves
•
Applies in thicknesses of 50 mils in
one application
Item #
Size:
15350
1 lb
Flexible urethane technologies for repairing worn or damaged SBR conveyor belts, rubber lined equipment
such as pipes and tanks in mines, quarries, and coal-fired power plants. These products are in a non-sag putty
for patching and repairing linings along with self-leveling thixitropic versions that create a smooth surface for
repairing conveyor belts.
Before: R-Flex
®
Repair
Before: R-Flex
®
Clip Repair
After: R-Flex
®
Repair Belt Running Strong
After: R-Flex
®
Clip Repair
Belting & Rubber Repair
Devcon
®
R-Flex
®
A self-leveling urethane compound for
repairing holes, tears, gouges, and
protecting clips, on conveyor belts.
•
Functional cure in 90 minutes
•
High adhesion with surface pull of the
SBR rubber
•
Kit includes fluorescent surface
conditioner for dark environments
Item #
Size:
15550
4 lb
15656
1.5 lb
Devcon
®
Flexane
®
80 Putty
Trowelable urethane for repairing and lining
process equipment exposed to wear, abrasion,
vibration or expansion and contraction.
•
Service temperatures to 180°F in
dry environments and 120°F in wet
environments
•
Bonds to metal, concrete, rubber,
wood, and fiberglass surfaces
Item #
Size:
15820
1 lb
15850
4 lb
Wear & Abrasion Solutions
选型目录：
Product Technologies
Wearing-resistant, Abrasion-resistant Coatings
Elevated Temperature, Wear-resistant Coatings
Belting & Rubber Repair
Corrosion Repair Compounds
Metal Repair Epoxies
Crusher Backing Compound and Concave Sealing
Surface Preparation
Agency Approvals
Product Index
您正在使用的浏览器版本过低，将不能正常浏览产品选型内容。
- 收藏