平台合作
相关推荐
How can the start-up behavior be modified?
The way of the power state transition can be modified through the register of TRANS_COND0/1.
How can the start-up behavior be modified?
The way of the power state transition can be modified through the register of TRANS_COND0/1.
How can I call a C function from the startup routine?
Use BL instruction to call a C function from the startup routine. Put an underscore (_) at the beginning of a C function name to call. The following shows an example. Example: BL _sub
How can I increase the magnetic field at which the sensor module starts to saturate?
There are 2 sources of magnetic saturation: the Integrated Magnetic Concentrator (IMC) itself, and the ferromagnetic shield. The former is selectable as an option code, and is in fact recommended by the current sensor simulator. The latter is mainly defined by the thickness of the shield. The current sensor simulator selects among a set of fixed dimensions, aiming at standardization. Increasing the thickness of the shield will significantly drive the saturation level up.
How can I change the stack size?
You have the following two ways to change the stack size: (1) From the IDEU8 menu bar, use [Project] -> [Options] -> [Target Option] -> [General] -> [Link] -> [Stack Size]. (2) From the IDEU8 menu bar, use [Project] -> [Options] -> [Compile/Assemble Option] -> [Code Generation] -> [Compiler] -> [Stack Size]. When you use the above two ways to specify a value in [Stack Size] concurrently, the setting of (1) has higher priority than that of (2). Related Products: ML610(Q)40x, ML610(Q)42x, ML610(Q)47x, ML610(Q)48x, ML610Q10x, ML610Q11x, ML610Q17x, ML610Q30x, ML610Q35x, ML610Q36x, ML610Q38x, ML610Q41x, ML610Q43x, ML610Q46x, ML620Q13x, ML620Q15x, ML620Q416/ML620Q418, ML620Q503H/ML620Q504H/ML620Q506H, ML62Q12xx, ML62Q13xx, ML62Q14xx, ML62Q15xx/ML62Q18xx, ML62Q16xx, ML62Q17xx
Is the RF SAW filter needed?
Although it is not needed for meeting the standard, we recommend to insert the RF SAW filter because interfering sources may exist near any actual operation band. Related Products: ML7344/ML7406 family, ML7345 family, ML7396 family, ML7404, ML7414
Is there any way to avoid receiving data during CCA?
To prevent data reception during CCA, follow the steps shown below. To restore data reception after CCA, be sure to return to the original setting before reception. [Procedure] (1) Setting to prevent bit synchronization from being established BANK1: 0x5C = 0x00 BANK3: 0x03 = 0x00 (2) CCA started (3) Waiting for CCA completion (4) After completion of CCA, TRX_OFF (1) Setting to establish bit synchronization BANK1: 0x5C = original value BANK3: 0x03 = original value Related Products: ML7345 family
Is there any way to avoid receiving data during CCA?
To prevent data reception during CCA, follow the steps shown below. To restore data reception after CCA, be sure to return to the original setting before reception. [Procedure] (1) Setting to prevent bit synchronization from being established BANK2: 0x03 = 0x00 BANK2: 0x0E = 0x00 (2) CCA started (3) Waiting for CCA completion (4) After completion of CCA, TRX_OFF (1) Setting to establish bit synchronization BANK2: 0x03 = original value BANK2: 0x0E = original value Related Products: ML7396 family
Is it possible to use I2S output (master) on the ML22Q53X?
Since the SAI interface (I2S) of the ML22Q53X is a slave, I2S output (master) is not possible. Related Products: ML22530/Q53x, ML22660/Q66x
Are there any cautions/notes when program development is done with the assembler?
When a program is developed with assembly language, and not combining the startup file (s610xxxxx.asm), the RAM area is not initialized; therefore, make sure to initialize with the program. When combining with a program written in C language, refer to "1.6 Combining with Assembly Language" in "CCU8 Programming Guide", and write your code accordingly. Related Products: ML610(Q)40x, ML610(Q)42x, ML610(Q)47x, ML610(Q)48x, ML610Q10x, ML610Q11x, ML610Q17x, ML610Q30x, ML610Q35x, ML610Q36x, ML610Q38x, ML610Q41x, ML610Q43x, ML610Q46x, ML620Q13x, ML620Q15x, ML620Q416/ML620Q418, ML620Q503H/ML620Q504H/ML620Q506H, ML62Q12xx, ML62Q13xx, ML62Q14xx, ML62Q15xx/ML62Q18xx, ML62Q16xx, ML62Q17xx
What is the size of sample program code?
Sample code size for ML5236 is 23KB, ML5238 is 26KB. For ML5236, data ROM of 2.3KB is used for parameter and log storage.
What happens if there are less through holes on GND for the back side GND pad of the chip?
GND may be shaken and various RF characteristics would be worse. Even if 12 through holes are used, the same situation would happen unless connected GND plane is strengthed. Related Products: ML7344/ML7406 family, ML7345 family, ML7396 family, ML7404, ML7414
Are there any special functions or know-how to save power consumption?
Intermittent operation performed in Deep-HALT mode, which is an industry-leading function for saving the standby current of the low-speed clock, can help reducing the average power consumption. Deep-HALT mode can be released by a timer. Also, power consumption can be reduced by stopping the operation of the unused circuits with the block control function. Related Products: ML62Q12xx, ML62Q13xx, ML62Q14xx, ML62Q15xx/ML62Q18xx, ML62Q16xx, ML62Q17xx
I want to know the transmission start timing in UART communication.
After data is written to SDnBUFH, the start bit is output after the 1-bit transmission time set by UAnBRT.
电子商城
现货市场
服务
可定制丙烯酸酯胶粘剂的粘度范围：250~36000 mPa·s，硬度范围：50Shore 00~85Shore D，其他参数如外观颜色，固化能量等也可按需定制。
最小起订量： 1 提交需求>
可定制环氧胶的粘度范围：9000~170000 mPa·s；固化方式：可加热、仅室温、可UV；其他参数如外观颜色、硬度等也可按需定制。
最小起订量： 1支 提交需求>
授权代理品牌：集成电路
授权代理品牌：分立元件
授权代理品牌：接插件及结构件
授权代理品牌：部件、组件及配件
授权代理品牌：电源及模块
授权代理品牌：电子材料
授权代理品牌：仪器仪表及测试配组件
授权代理品牌：电工工具及材料
授权代理品牌：机械电子元件
授权代理品牌：加工与定制
我要提问