What is the difference between PWR and SWR and how

What is the difference between pwr and SWR and how to select?
创建于2024-06-23

代理服务

技术支持

采购服务

写回答

1个回答

用户_5489 (0)

Due to process difference of pwr and SWR, the Pulse and SURGE resistance feature are different. The characteristics of SWR are slightly better than PWR, but the precision performance is relatively poor. therefore, PWR should be selected for higher precision and SWR is suitABLE for high characteristics requirements.

创建于2024-06-23

发送到邮箱 |
+1 赞 0
收藏
| 转发至：

平台合作

展开

What's the difference between standard and custom products?

Our standard products can be found in our product portfolio: Thermoelectric Coolers, Thermoelectric Cooler Assemblies, Liquid Cooling Systems, Temperature Controllers. These units have specific heat transfer methods, cooling capacity ranges or size constraints and can be ordered upon request from our distribution partners. If the capacity, size or other parameters of our standard products do not meet your application requirements you may need a customized solution. Laird Thermal Systems has the ability to customize our entire product range, however MOQ’s apply. To optimize performance and long-life operation, an application could require a customized thermal management solution. Also cooling capacities above 5 kW typically require a custom solution. Laird Thermal Systems designs and manufactures customized, thermal management solutions for performance-critical applications to optimize your product’s performance. Laird Thermal Systems offers strong engineering design services with a global presence that supports onsite concept generation, thermal modeling, mechanical and electrical design and rapid prototyping. The company also offers validation test services to meet unique compliance standards for each industry, such as UL, Telcordia, or a unique standard specific to a medical, industrial or semiconductor application.

2024-10-30 - 技术问答代理服务技术支持采购服务

What is the difference between the BT880/1 and the BT882/3?

The main differences between these parts are that the BT882/3 includes a higher colour depth RGB interface (RGB666 vs RGB888), includes an additional GPIO pin (3 GPIOs vs 4 GPIOs) and has an increased package size than that of the BT880/1 (QFN48 vs QFN56).

2024-06-28 - 技术问答代理服务技术支持采购服务

What is the difference between LoRa and LoRaWAN?

LoRa is a modulation technology, and LoRaWAN is a set of communication protocols and system architecture based on LoRa modulation technology. The relationship between the two is that LoRa is the PHY layer, and LoRaWAN is the MAC layer.

2024-06-17 - 技术问答代理服务技术支持采购服务

For BD37033FV-M,BD37034FV-M, What is the difference between the two products?

The BD37034FV-M has built-in HPFs for front and rear, and also supports HI-VOL output.

2024-08-30 - 技术问答代理服务技术支持采购服务

How does Walmate ensure the quality of my parts?

Walmate takes a proactive approach to customer’s quality concerns from the initial communication, providing cost-effective and rationalized advice from designs, materials, production processes, manufacturability, etc. Once your order is confirmed, we will perform a full Design for Manufacturing (DFM) review to point out any issues that our engineers feel may affect the quality of your parts. We have the ability to share inspection data with you in real-time so we can work together to address any quality issues you may have during production. All incoming materials will meet your design specifications. Final inspection reports before shipment.

2024-09-30 - 技术问答代理服务技术支持采购服务

How to select initial resistance for RT trimmable resistor?

The initial resistance of Viking trimmable resistance (RT series) is the target value that customer required. Because resistance will be increased by laser trimming, precision is shown by negative values. The precision determines trimming range, length and characteristics which enables customer to select according to actual needs.

2024-07-29 - 技术问答代理服务技术支持采购服务

Which series is included in foil process? What is difference from alloy process?

Alloy products of Viking include metal foil and metal strip. The former refers to alloy patch and the latter refers to the alloy. Foil process attaches alloy patch on ceramics substrate to form a resistance layer while alloy process produces complete resistor with alloy material. Foil process includes CSM series and MF, MF.A series and alloy process has LR, LRP, LRJ and LRS series. The common feature is Low TCR. Foil process can be laser trimmed and is able to produce continuous resistance within the range of resistance, so it is convenient to customize the resistance according to customer needs. Due to the limitations of materials and design, the alloy process can produce relatively less resistances, but has good current resistance.

2024-07-29 - 技术问答代理服务技术支持采购服务

For the ML62Q1000 series functional timer, what is the difference between FTMnP and FTMnN outputs?

Behaviors such as pulse polarity and duty vary between FTMnP and FTMnN by the mode. (1) In the timer mode, FTMnP and FTMnN output reversed-phase pulse signals. (2) In the PWM1 mode, FTMnP and FTMnN perform in-phase PWM outputs with different duties. (3) In the PWM2 mode, FTMnP and FTMnN perform reversed-phase PWM outputs with the same duty. Related Products: ML62Q12xx, ML62Q13xx, ML62Q14xx, ML62Q15xx/ML62Q18xx, ML62Q16xx, ML62Q17xx

2024-08-30 - 技术问答代理服务技术支持采购服务

What is the function of jumper? Why precision is not required by 0Ω?

Jumper resistor is also known as 0Ω resistor. ① In circuit design, the power supply can be separated as multiple channels with 0Ω resistor for commissioning or compatible design. ② It can be used as jumper. If certain section of the line is not used, just simply attached a 0Ω resistor (appearance will not be affected). ③ When the parameter of the matching circuit is uncertain, it can be replaced by 0Ω first and replace it with component with specific value during commissioning. ④ When wiring is impossible, you can also add a 0Ω resistor. ⑤ Under high-frequency signal, it can act as inductor or capacitor (related to the characteristics of external circuit) for dealing with EMC problems. ⑥ Used for cross-over connection of current circuit to provide shorter returning path and reduce interference. ⑦ Sometimes, user will change settings during circuit configuration. In order to reduce maintenance cost, 0Ω resistor can be used as alternative of jumper and welded on board. The actual resistance of a 0Ω resistor is not zero, the definition of which is ≦50mΩ (or ≦20mΩ). Therefore, parts with ±1% or ±5% share the same specifications. For functional perspective, jumper resistance dose not require precision. What user needed is the maximum rated current (i.e. current allowed to pass) instead of cannot be purchased or produced.

2024-07-29 - 技术问答代理服务技术支持采购服务

Variation of film thickness and recommendation for 0.1%.

It is recommended to use thin film for 0.1% high precision product for better resistance consistency. The 0.1% precision for resistance of thick film is obtained by screening. The product consistency and stability are far less than thin film resistor. From the perspective of product structure, the biggest difference is the material and manufacturing method of the resistance layer. Thin film applies target material to let alloy film layer formed on ceramics substrate by using vacuum coating to shape resistance layer with <1um general thickness. Thick film forms resistance layer on ceramics substrate by applying printing resistance ink with 5~10um thickness; that is why it is called thick film. Because of the different thickness of the resistor, laser trimming method is vary as well which determines the various characteristics of the products. The characteristic of thin film resistor focuses on high precision, low TCR and stability.

2024-07-29 - 技术问答代理服务技术支持采购服务

What is the difference between CS and RS? Why TCR of CS is better than RS?

CS and RS have the same design and similar product characteristics. Better TCR features are due to various material characteristics and process conditions with higher cost. Low-resistance product usually uses larger current and temperature raising of which will affect performance of circuit design due to resistance drift. Therefore, selecting resistor with better TCR can slow resistance drift to stabilize circuit.

2024-07-29 - 技术问答代理服务技术支持采购服务

DURABLE CAPACITORS FOR EXCEPTIONAL PERFORMANCE

Exxelia’s film capacitor product lines include a wide array of custom designs using state of the art technologies combined with the latest developments in dielectric films (including polyester, polypropylene, PPS, and teflon). Kraft/paper, foil capacitor, and metallized film capacitor products are available. This allows Exxelia to provide high temperature capability; high voltage ratings; precision capacitors with ± ¼% tolerances, and exceptional performance in harsh environments. Military film capacitors are tested and qualified to military standards, with more than 30 military qualified products. Film capacitors are exceptional for pulse/storage, DC link, energy discharge, and custom applications. A wide selection of packaging designs are available such as film-wrapped, pre-molded epoxy cases, and hermetically sealed metal cases. Exxelia continues to research and develop film caps with new methods in capacitor manufacturing to provide durable designs and packaging schemes for special environmental use.

2024-08-30 - 技术问答代理服务技术支持采购服务

Pulse information of CS low-resistance products

All resistors have pulse characteristics and the difference is only the strength of the characteristics. CS is a general ultra-low resistance product which does not have pulse control in both design and process. Pulse varies greatly between production batches. If the current data is included, it will cause misunderstanding when designing and selecting models. Moreover, the ultra-low resistance products have relatively large variations in current design which will also affect performance of pulse characteristics; so they are not intended to be put in. It is recommended that customer provides practical applications for suitable product suggestion.

2024-07-29 - 技术问答代理服务技术支持采购服务

What is the difference between automotive grade product and ordinary ones? Why automotive grade resistor is more expensive with the same MDS?

To achieve the ultimate goal of zero defects, requirements and controls are made specifically for automotive grade resistor: Material: specified material Machine: specific machine Operator: designated personnel Method: There are many and strict control parameters and more process inspections which uses AOI automatic inspection machine are added for screening. Increase inspection items and number of test samples to ensure automotive grade quality requirements are achieved.

2024-07-29 - 技术问答代理服务技术支持采购服务

I want to use FRD products connected in series directly. Is there anything I have to pay attention?

It would be difficult to secure voltage balance in two high-speed FRDs connected in series directly (Connection where voltage protection is not coordinated). Especially for the commutation surge voltage in high-speed switching, shared voltage varies largely due to difference in reverse recovery characteristics of the two devices. Thermal influence of other components and exoergic environment also affect the difference largely. Therefore, it is possible that 100% of voltage would be applied to one device. In order to suppress such differences, it is necessary to add a voltage dividing capacitor to each device to share the differences. There is no specified capacitance value for such voltage dividing capacitors because the value varies depending on the operating conditions. It is necessary to make sure whether the voltage can be surely shared by the capacitors so that their capacitances could be between several tens pF and several hundreds pF. Ripping can be suppressed by these capacitors. In order to divide the steady reverse voltage in half, resistors in parallel are also required. That is to say, adding capacitors or resistors is an only way to balance voltage. The point is that adding a resistor or a capacitor is an only way to get the voltage balance.

2024-07-29 - 技术问答代理服务技术支持采购服务