1个回答
-
![]()
- 用户_5489 (0)
- Check the display unit of [cell Size] from the pop-up menu displayed by right-clicking on the [memory Browser] view.
If the display unit is 1 byte, the same image as the actual memory is displayed in bytes.
If the display unit is 2 bytes or more, it will be displayed for each set unit. For example, if the display unit is 2 bytes, the value for 2 bytes is displayed by swapping the upper 1 byte and the lower 1 byte. - 创建于2024-08-21
- |
- +1 赞 0
- 收藏
平台合作
相关推荐
When static global variables in the file are registered in the Expressions view of LEXIDE-U16, they are not displayed unless the PC (program counter) is within the scope. Is there a way to always display them?
If you want to always display the values of static global variables etc. in the file, please use the Memory view. The Memory view is displayed by selecting Memory from [Window]> [Show View]> [Other]> [Debug] of LEXIDE-U16 and clicking the [Open] button. Specify the address to be displayed in the Expressions view in the Memory view when the code in which the target variable exists is displayed in Debug. For details on how to use the Memory view, refer to "7.18 Memory View" in the "LEXIDE-U16 User's Manual". Related Products: ML610(Q)40x, ML610(Q)42x, ML610(Q)47x, ML610(Q)48x, ML610Q10x, ML610Q11x, ML610Q17x, ML610Q30x, ML610Q35x, ML610Q36x, ML610Q38x, ML610Q41x, ML610Q43x, ML610Q46x, ML620Q13x, ML620Q15x, ML620Q416/ML620Q418, ML620Q503H/ML620Q504H/ML620Q506H, ML62Q12xx, ML62Q13xx, ML62Q14xx, ML62Q15xx/ML62Q18xx, ML62Q16xx, ML62Q17xx
When writing the sound code data, "Memory capacity of the specified ROM image is too large." Is displayed and the ROM cannot be written.
This error occurs when writing sound code data that exceeds the ROM capacity of the product. For the sound code data to be written to the product you have, use the sound code data created by that product.
When using the DTU8 debugger, is it possible not to change the displayed source file on the source window after a break?
Yes, it is possible. Set [PC trace mode] of the displayed source window to “No trace”. The setting method is as follows. (1) Right-click the mouse on the DTU8 debugger source window to display the context menu. (2) Select [Properties] from the context menu to display the [Properties] dialog box. (3) Select “No trace” for [PC trace mode] in the [Properties] dialog box and then click the OK button. Related Products: ML610(Q)40x, ML610(Q)42x, ML610(Q)47x, ML610(Q)48x, ML610Q10x, ML610Q11x, ML610Q17x, ML610Q30x, ML610Q35x, ML610Q36x, ML610Q38x, ML610Q41x, ML610Q43x, ML610Q46x, ML620Q13x, ML620Q15x, ML620Q416/ML620Q418, ML620Q503H/ML620Q504H/ML620Q506H, ML62Q12xx, ML62Q13xx, ML62Q14xx, ML62Q15xx/ML62Q18xx, ML62Q16xx, ML62Q17xx
Why are there two display list buffers?
There are two display list buffers as one buffer is required for editing to create a new display and the other is the one that contains the display list currently being actioned. A swap command is required in the controller code to swap between the editable buffer and the actioned buffer.
Why are there two display list buffers?
There are two display list buffers as one buffer is required for editing to create a new display and the other is the one that contains the display list currently being actioned. A swap command is required in the controller code to swap between the editable buffer and the actioned buffer.
CSL0902BT1蓝色表面贴装片式LED数据手册
本资料为ROHM公司生产的CSL0902BT1型号蓝光表面贴装LED的数据手册。该产品采用InGaN芯片，具有透明无色树脂封装，适用于显示屏照明单元。数据手册详细介绍了产品的尺寸、绝对最大额定值、电光学特性、发光分类、重量、包装要求、注意事项、安装方法等内容。
ROHM - 蓝色表面贴装芯片LED,BLUE SURFACE MOUNT CHIP LEDS,CSL0902BT1,显示单元,DISPLAY UNIT
SMLEN3EC8TT86表面贴装片式LED数据表
本资料为ROHM公司生产的SMLEN3EC8TT86型LED的数据表。该产品采用InGaN材料制成，具有透明无色树脂封装，适用于显示屏的光源。数据表中包含了产品的尺寸、绝对最大额定值、电光特性、发光分类、重量、包装要求、注意事项等内容。
ROHM - 表面贴装芯片LED,SURFACE MOUNT CHIP LEDS,SMLEN3EC8TT86,显示单元,DISPLAY UNIT
Is the LCD display turned OFF in the HALT mode?
Entering the HALT mode does not affect the LCD display. The existing state before entering the HALT mode is maintained. Related Products: ML610(Q)40x, ML610(Q)42x, ML610(Q)47x, ML610Q17x, ML610Q38x, ML610Q41x, ML610Q43x, ML610Q46x, ML620Q416/ML620Q418, ML62Q16xx, ML62Q17xx
ROHM（罗姆） LED显示器选型指南（英文）
High Brightness LED Numeric Displays Surface Mount LED Numeric Displays LED Numeric Displays
ROHM - SINGLE DIGIT LED NUMERIC DISPLAYS,LED显示屏,单数字LED数字显示器,HIGH BRIGHTNESS LED NUMERIC DISPLAYS,TWO DIGIT LED NUMERIC DISPLAYS,SURFACE MOUNT LED NUMERIC DISPLAYS,LED DISPLAYS,LED数字显示器,高亮度LED数字显示器,两位LED数字显示器,THREE DIGIT LED NUMERIC DISPLAY,表面贴装LED数字显示器,LED NUMERIC DISPLAYS,三位LED数字显示屏,LAP-401DN,LBP-602MK2,LAP-601ML,LAP-401DD,LAP-601VL,LB-603VP,LA-601MB,LAP-401MD,LAP-601VB,LA-601ML,LBP-602DA2,LA-601EB,LB-603VF,LB-602MA2,LB-402VN,LB-602VK2,LA-501MN,LAP-301MB,LB-602AA2,LA-501MD,LB-602EA2,LA-301VL,LB-402MN,LA-301VB,LA-401MN,LAP-301DL,LA-401ED,LB-502MD,LA-301AL,LA-301EL,LA-401MD,LB-402VD,LA-301AB,LA-401VD,LA-401AN,LB-502MN,LA-301EB,LB-402MD,LF-3011VA,LA-301ML,LAP-301VL,LA-401AD,LA-301MB,LBP-602DK2,LA-401EN,LB-502VD,LA-501VN,LF-3011MK,LAP-301VB,LBP-602VK2,LBP-602MA2,LA-501VD,LB-502VN,LF-3011MA,LAP-301ML,LA-401VN,LB-602VA2,LA-601EL,LAP-601DL,LA-601AB,LBP-602VA2,LAP-401MN,LAP-601DB,LB-602MK2,LA-601VB,LA-601AL,LA-601VL,LAP-601MB,LB-602EK2,LAP-401VN,LF-3011VK,LAP-401VD,LB-602AK2
CSL0902UT1红色表面贴装片式LED数据手册
本资料为ROHM公司生产的CSL0902UT1型红光表面贴装LED的数据手册。该产品采用AlGaInP芯片，具有透明无色树脂封装，适用于显示屏照明单元。数据手册详细介绍了产品的尺寸、绝对最大额定值、电光学特性、发光分类、重量、包装要求、注意事项、安装方法等内容。
ROHM - RED SURFACE MOUNT CHIP LEDS,红色表面贴装芯片LED,CSL0902UT1,显示单元,DISPLAY UNIT
When programming with C language using the SFR (Special Function Register) name, how should I proceed?
When programming with C language using the SFR name, make sure to include a target header file corresponding to the microcontroller you use. Check the target header file corresponding to your microcontroller, select [Start] -> [All Programs] -> [U8 Tools] -> [About Model Information File] on Windows after installing U8 Development Tools. (*Note in a model information name written in "About Model Information File" (U8DevInf_j.htm) opened as described above, "Q" for the flash ROM version, and "P" for the temperature extension are not attached.) For example, ML610Q482 is displayed as "m610482.h" in the target header file. Include "m610482.h" using the #include preprocessing command. (Program code example) #include /* Including the target header file */ void initial_timer(void) { TM0CON0 = 0x08; /* Timer control register setting */ TM0D = 0x7f; /* Timer data register setting */ ETM0 = 1; /* Timer interrupt permission */ T0RUN = 1; /* Start timer count */ } The target header file is installed in "C:\Program Files\U8Dev\Inc" folder when U8 Development Tools are installed by default. For details on SFR referencing, also see "1.1 How to Refer SFR" in "CCU8 Programming Guide". Related Products: ML610(Q)48x
CSL0902YT1黄色表面贴装片式LED数据表
本资料为ROHM公司生产的CSL0902YT1型黄光表面贴装LED的数据表。该产品采用AlGaInP芯片，具有透明无色树脂封装，适用于显示屏照明单元。数据表中包含了产品的尺寸、绝对最大额定值、电光学特性、发光分类、重量、包装要求、注意事项等内容。
ROHM - 黄色表面贴装芯片LED,YELLOW SURFACE MOUNT CHIP LEDS,CSL0902YT1,显示单元,DISPLAY UNIT
CSL0903UT1（C）数据表
本资料为ROHM公司生产的CSL0903UT1(C)型红光表面贴装LED的数据手册。该产品采用AlGaInP芯片，具有透明无色树脂封装，适用于显示屏照明单元。数据手册详细介绍了产品的尺寸、绝对最大额定值、电光学特性、发光分类、重量、包装要求、注意事项、安装方法等内容。
ROHM - 表面贴装芯片LED,SURFACE MOUNT CHIP LEDS,CSL0903UT1(C),显示单元,DISPLAY UNIT
Can I use the DTU8 debugger and on-chip emulator to save the contents of code memory to a file?
Yes, it is possible. Execute [Save Program File] in the [File] menu on the DTU8 debugger. Related Products: ML610(Q)40x, ML610(Q)42x, ML610(Q)47x, ML610(Q)48x, ML610Q10x, ML610Q11x, ML610Q17x, ML610Q30x, ML610Q35x, ML610Q36x, ML610Q38x, ML610Q41x, ML610Q43x, ML610Q46x, ML620Q13x, ML620Q15x, ML620Q416/ML620Q418, ML620Q503H/ML620Q504H/ML620Q506H, ML62Q12xx, ML62Q13xx, ML62Q14xx, ML62Q15xx/ML62Q18xx, ML62Q16xx, ML62Q17xx
CSL1103WBBW1白色表面贴装片式LED数据手册
本资料为ROHM公司生产的CSL1103WBBW1型InGaN白光表面贴装LED的数据手册。该产品采用树脂封装，具有高亮度、低功耗等特点，适用于显示单元的光源。
ROHM - 表面贴装芯片LED,SURFACE MOUNT CHIP LEDS,CSL1103WBBW1,显示单元,DISPLAY UNIT
电子商城
现货市场
授权代理品牌：集成电路
授权代理品牌：分立元件
授权代理品牌：接插件及结构件
授权代理品牌：部件、组件及配件
授权代理品牌：电源及模块
授权代理品牌：电子材料
授权代理品牌：仪器仪表及测试配组件
授权代理品牌：电工工具及材料
授权代理品牌：机械电子元件
授权代理品牌：加工与定制
我要提问