1个回答
- |
- +1 赞 0
- 收藏
平台合作
相关推荐
Although the command response returns, the system does not operate as desired.
In every evaluation kits, the initial setting macros should be read first regardless of whether the TeraTerm macro or GUI tool is used. Verify whether the initial setting macros are read. Related Products: ML7344/ML7406 family, ML7345 family, ML7396 family, ML7404
Does the evaluation kit contain programs written?
It contains "Serial communication sample software" written to it. It is possible to easily check the operation of serial communication using a smartphone app called "BLE Tool".
Do you have the evaluation kit?
Yes. Please contact the sales for details. Related Products: ML7344/ML7406 family, ML7345 family, ML7396 family, ML7404
How does Walmate ensure the quality of my parts?
Walmate takes a proactive approach to customer’s quality concerns from the initial communication, providing cost-effective and rationalized advice from designs, materials, production processes, manufacturability, etc. Once your order is confirmed, we will perform a full Design for Manufacturing (DFM) review to point out any issues that our engineers feel may affect the quality of your parts. We have the ability to share inspection data with you in real-time so we can work together to address any quality issues you may have during production. All incoming materials will meet your design specifications. Final inspection reports before shipment.
Why does my function generator amplitude not match the set point?
The most likely cause is that the generator output is not configured with the correct value that matches the actual load.
Is the RF SAW filter needed?
Although it is not needed for meeting the standard, we recommend to insert the RF SAW filter because interfering sources may exist near any actual operation band. Related Products: ML7344/ML7406 family, ML7345 family, ML7396 family, ML7404, ML7414
Is it possible to generate a ROM code data file with HTU8, and write to flash ROM to evaluate without acquiring a ROM code number?
Yes. It is possible to generate a ROM code data file with HTU8, and write to flash ROM to evaluate without acquiring a ROM code number. The content itself on the ROM code data file output by HTU8 is not related to a ROM code number. Related Products: ML610(Q)40x, ML610(Q)42x, ML610(Q)47x, ML610(Q)48x, ML610Q10x, ML610Q11x, ML610Q17x, ML610Q30x, ML610Q35x, ML610Q38x, ML610Q41x, ML610Q43x, ML610Q46x, ML620Q13x, ML620Q15x, ML620Q416/ML620Q418, ML620Q503H/ML620Q504H/ML620Q506H, ML62Q12xx, ML62Q13xx, ML62Q14xx, ML62Q15xx/ML62Q18xx, ML62Q16xx, ML62Q17xx
For BA3121F,BA3123F, Does simply inserting it into the signal path have an effect?
The degree of effect varies depending on the values of the external components, but basically, the effect of just inserting the IC is the removal of common-mode noise.
What is a offset of the rcoa_adjustOscillation function argument described in the ML62Q1000 Series RC Oscillation Correction Sample Software AP Note?
The offset is a value for adjusting the value writing to the low-speed RC oscillation frequency adjustment register. Normally, please use the fixed value 0 as with the sample software.
For Analog Audio Processors, Can a product that writes commands via I2C I/F also read back register values?
Reading of register value is not supported.
Is an antenna included?
In each evaluation kit, an antenna is included for reference. However, the antenna for 800 to 900 MHz is included in any evaluation kit in terms of size, and using it with another frequency band (400 MHz), antenna gain will be worse. Related Products: ML7344/ML7406 family, ML7345 family, ML7396 family, ML7404
Is it possible to use direct conversion (zero IF)?
Setting is possible. However, the sensitivity is affected because the leakage of local frequency components to the ANT always appears as Co-Channel interference. For this reason, its use is not recommended. Related Products: ML7345/ML7345D, ML7404, ML7414
For Analog Audio Processors, Do I also need to set the registers to its initial values?
When power is turned on, be sure to send data to all addresses as initial data. It is also recommended to mute the device until the initial data is transmitted.
When the memory contents are displayed in the [Memory Browser] view of the LEXIDE-U16 (or LEXIDE-Ω), the upper and lower data appear to be swapped, unlike the actual memory values.
Check the display unit of [Cell Size] from the pop-up menu displayed by right-clicking on the [Memory Browser] view. If the display unit is 1 byte, the same image as the actual memory is displayed in bytes. If the display unit is 2 bytes or more, it will be displayed for each set unit. For example, if the display unit is 2 bytes, the value for 2 bytes is displayed by swapping the upper 1 byte and the lower 1 byte.
电子商城
现货市场
服务
提供蓝牙BLE芯片协议、蓝牙模块、蓝牙成品测试认证服务；测试内容分Host主机层，Controller控制器层，Profile应用层测试。支持到场/视频直播测试，资深专家全程指导。
实验室地址：深圳 提交需求>
拥有中等规模的SMT、DIP以及成品组装产线；支持PCBA及成品OEM/ODM代工组装制造；在嵌入式系统、物联网系统等具备专业性量产制造的项目组织和服务能力。
提交需求>
授权代理品牌：集成电路
授权代理品牌：分立元件
授权代理品牌：接插件及结构件
授权代理品牌：部件、组件及配件
授权代理品牌：电源及模块
授权代理品牌：电子材料
授权代理品牌：仪器仪表及测试配组件
授权代理品牌：电工工具及材料
授权代理品牌：机械电子元件
授权代理品牌：加工与定制
我要提问