How Can Fiber Reflector Be Used in PON Network Link Monitoring?

时间： 2023-08-31 来源：T&S News

技术问答

选型帮助

研发客服

商务客服

In the PON (passive optical network) network, especially in the complex point-to-multipoint PON ODN (optical distribution network) topology environment, the rapid detection and diagnosis of optical fiber faults have become challenging work.

Although optical time-domain reflectometer (OTDR) tools are widely used at present, OTDR detection is sometimes not particularly sensitive to the attenuation of optical signals at the ends of some ODN branch fibers or ONU fibers.

Installing a low-cost wavelength-selective fiber reflector on the ONU side is often used at present, through which accurate detection of the end-to-end attenuation of the optical link can be achieved.

1. The working principle of fiber grating reflectors

The test light pulse sent by the OTDR is mainly reflected back with a reflectivity of nearly 100% by using the fiber grating, while the working wavelength of a normal passive optical network (PON) system passes through the reflector with little attenuation because it does not satisfy the Bragg condition of the fiber grating.

The main function of this is to accurately calculate the return loss value of the reflection event at the end of each ONU branch by detecting the existence of the reflected OTDR test signal and the intensity of the optical signal. Thus, it tells whether the optical link from the OLT side to the ONU side is normal. In this way, real-time monitoring of fault points and fast and accurate diagnosis is realized.

By flexibly deploying the position of the fiber grating reflector and identifying different ODN sections, the detection and location of the ODN fault point and the cause analysis can be quickly realized, which can reduce the fault processing time and improve the test efficiency and maintenance quality.

In the first-level splitting scenario, if the return loss of the reflector of a certain fiber branch of the home increases significantly compared with the return loss value of the health file, it indicates that there is a problem with the optical fiber link of this branch. If all the fiber branches installed with fiber reflectors have an obvious return loss increase at the same time, it indicates that the main fiber is faulty.

In the secondary optical splitting scenario, the difference between return losses can also be used to accurately locate whether the attenuation fault has occurred in the distribution fiber segment or the home fiber segment. Whether it is a first-level or second-level splitting scenario, since the reflection peak will drop sharply at the end of the OTDR test curve, the return loss value of the longest branch link in the ODN network may not be accurately measured and it is necessary to measure the fiber reflection.

2. The characteristics of fiber grating reflectors

FBG reflectors can be conveniently placed in series at the end of the user. It has the characteristics of long life, stability and reliability, convenient connection of adapter structure, and so on. This is one of the reasons why fiber reflectors are the ideal optical end choice for FTTx network link monitoring.

As a fiber optical accessories supplier, T&S Communications takes a leading role in OEM and ODM service for optical fiber termination solutions. Based on T&S Communications’ excellent comprehensive capabilities, T&S Communications is dedicated to bringing fiber optical components with superior performance to next-generation communications in a green, pragmatic, and cost-effective manner.

发送到邮箱 |
+1 赞 0
收藏
评论 0
| 转发至：

本文由出山转载自T&S News，原文标题为:How Can Fiber Reflector Be Used in PON Network Link Monitoring?，本站所有转载文章系出于传递更多信息之目的，且明确注明来源，不希望被转载的媒体或个人可与我们联系，我们将立即进行删除处理。

全部评论（0）

暂无评论

How Are Fiber Optic Reflectors Applied to PON Network Link Monitoring?

In the PON (Passive optical network, passive optical network) network, especially the complex point-to-multipoint PON ODN (Optical distribution network, optical distribution network) topology environment, the rapid monitoring and diagnosis of optical fiber faults has become challenging work.

技术探讨发布时间 : 2023-10-09

What is Passive Optical Network (PON) ?

A passive optical network (PON) is a fiber optic network that uses a point-to-multipoint topology and optical splitters to transmit data from a single transmission point to multiple user endpoints. Passive here refers to the unpowered state of the fiber and its splitting/combining components.

技术探讨发布时间 : 2023-08-17

太辰光（T&S）光纤通信产品选型指南

描述- 深圳太辰光通信股份有限公司成立于2000年，于2016年12月在深圳证券交易所创业板上市，证券代码300570，公司的主营业务为各种光通信器件及其集成功能模块的研发、生产和销售。光通信器件主要包括高密度光纤连接器、常规光纤连接器件、PLC光分路器、波分复用器等无源光器件、光模块、有源光缆等有源光器件以及陶瓷插芯、MT插芯，平面光波导晶圆和芯片等基础元器件。

型号- TSSLS-NCNEE3C,400G QSFP-DD TO 4X100G QSFP56 AOC,200G QSFP56 SR4,400G QSFP-DD TO 8X50G SFP56 DAC,TSSLS-NXXCE3T,TSQM4-NAAJB1C,TSQS-PC40G-XXM,TSD4Q-85M-XXXC,TS-RD1,TS-RD1-1U,TSD8S-85M-XXXC,TSQSQ-85G-XXXC,TSQ45-85G-XXXC,TSQM4-NAAJB1T,TS-FD2,TSSLS-NXXCE3C,TS-FD1-1U,TS-FD1,40G QSFP+TO 4X10G SFP+DAC,PD2-6M,TSSLS-NCNEH8C,40G QSFP+ TO 4X10G SFP+ AOC,TSQS-PC56G-XXM,FEN-LH-SMA,TS-FD2 SERIES,56G QSFP+DAC,40G QSFP+ ER4,TSQD-PC4HG-XXM,200G QSFP56 AOC,10G SFP+ ZR,FEN-LH-LC,100G QSFP28 PSM4,TSSLS-CXXEE3C,25G SFP28 SR,TSSLS-NAACBIT,TSSLS-NAAEAIT,TSQDQ-4PC1HG-XXM,100G QSFP28 AOC,TSSLS-NAACB1C,TSSLS-NAAEA1C,FEN-LH-SDL,10G SFP+ DWDM,MD2-1M24L,TSQL4-E11GH7C,TSQSS-PC2HG-XXM,TSQL4-F22JH4C,FES-LC-PA,25G SFP28 DAC,25G SFP28 CWDM,400G QSFP-DD DAC,400G QSFP-DD DR4,TSSLS-NCNCE3C,400G QSFP-DD TO 2X200G QSFP56 DAC,MD1-3M24L,TSSP-PC25G-XXM,TSD2Q-85L-XXXC,200G QSFP56 TO 4X50G SFP56 AOC,56G QSFP+ AOC,TSSP-PC56G-XXM,TSQS-PC2HG-XXM,100G QSFP28 SR4,10G SFP+ LR,TSQM4-NCNJC3C,TSQSS-PC1HG-XXM,TS-RD1 SERIES,TSSSS-85H-XXXC,TSQDQ-2PC2HG-XXM,50G SFP56 AOC,40G QSFP+ DAC,TS-FD1 SERIES,TSQSQ-85H-XXXC,TSQM4-NAALAIC,FEN-SC-FUNNEL-1,PD2-24L,FEN-SC-FUNNEL-2,TSQM4-NAAGB1C,TSQM4-NAAGBIT,TSSSS-85E-XXXC,40G QSFP+ LR4,TSSLS-CXXCE3C,FES-SC-PA,TSQS-PC1HG-XXM,200G QSFP-DD TO 2X100G QSFP28 AOC,100G QSFP28 TO 2X50G QSFP28 AOC,TSSLS-DXXEE4C,10G SFP+ DAC,25G SFP28 BIDI,TSSLS-NCNEE3T,100G QSFP28 LR4,TSQ4S-85L-XXXC,TSQSQ-85L-XXXC,100G QSFP28 DAC,TSDM4-NCNMC3C,25G SFP28 ER,10G SFP+ AOC,10G SFP+ BIDI,400G QSFP-DD TO 8X50G SFP56 AOC,800G QSFP-DD AOC,TSQM4-NCNGC3C,TSDR8-NAAMATC,TS-FD2-2U,10G SFP+ CWDM,10G SFP+SR,FEN-LC-2,25G SFP28 DWDM,TSSSS-85C-XXXC,TSDSD-85N-XXXC,100G QSFP28 TO 4X25G SFP28 AOC,TSQDS-8PC50G-XXM,800G QSFP-DD SR8,10G SFP+ ER,200G QSFP56 DAC,100G SFP-DD AOC,TSSLS-DXXCK8C,TSQ2Q-85J-XXXC,TSSLS-NCNCE3T,TSQSQ-PC2HG-XXM,TSD2Q-85M-XXXC,FEN-LH-SC,TSSLS-NXXEE3T,200G QSFP56 FR4,40G QSFP+ AOC,50G SFP56 DAC,100G QSFP28 TO 4X25G SFP28 DAC,100G QSFP28 ER4,FEN-SC-1,TSDSD-85M-XXXC,400G QSFP-DD FR4,TSDL4-E11MD3C,100G QSFP28 CWDM4,TSSLS-NXXEE3C,25G SFP28 LR,40G QSFP+PSM4,TSQL4-F22JE3C,400G QSFP-DD TO 2X200G QSFP56 AOC,TSTST-85K-XXXC,400G QSFP-DD AOC,TSQSQ-85J-XXXC,TSQ4S-85J-XXXC,TSD85-85L-XXXC,TSQL4-E11JE3C,TSDR8-NAANA1C,TSSLS-NCNCKBC,200G QSFP56 TO 4X50G SFP56 DAC,TSQL4-E11LD3C,400G QSFP-DD TO 4X100G QSFP56 DAC,200G QSFP-DD TO 8X25G SFP28 AOC,TSSLS-NCNCH4C,MD1-2M6M,200G QSFP56 TO 2X100G QSFP56 DAC,25G SFP28 AOC,PD1-24L,TSQL4-E11GE3C,400G QSFP-DD SR8,40G QSFP+SR4,TSQSS-PC40G-XXM,TSSLS-DXXCH4C,TSSP-PC192-XXM

选型指南 - 太辰光 - 202304版 - 202304 PDF 中文下载

FBG Reflector for Fiber Monitoring

数据手册 - 太辰光 - 2020/11/23 PDF 英文下载

FBG Reflector is the Ideal Optical End for FTTX Network Link Monitoring

The fiber grating fiber optic reflector utilizes the wavelength-selective properties of the fiber grating and the fiber grating is embedded in the adapter. It can be installed at the front end of the ONU and cooperates with the OTDR to realize the fault detection of the optical network.

设计经验发布时间 : 2023-10-25

U-Band Reflector for fiber Monitoring

数据手册 - 太辰光 - 2019/6/4 PDF 英文下载

What are the Features of FBG Reflector?

By installing the fiber optic reflector at the optical fiber connection end, the maintenance efficiency of the FTTH network is improved and the cost is lower. FBG fiber optic reflector is an ideal choice for optical fiber line monitoring and can be widely used in FTTX network, PON network, central computer room reflectivity test, communication system link detection, etc.

设计经验发布时间 : 2023-09-05

公司产品介绍 (Company product introduction)

型号- FWDM45/3,FWDM13/45,G657A1,G657A2,C/L2,C/L1

商品及供应商介绍 - 太辰光 - 2020/10/19 PDF 中英文下载

太辰光（T&S）光纤连接器选型指南

目录- 公司简介 Company profile 陶瓷插芯 Ceramic Ferrule 光纤连接器 Fiber Optic Cable Assembly 光纤元器件 Fiber Optic Components 波分复用器 WDM FBT光纤耦合器 FBT Coupler PLC分路器 PLC Splitter 光纤光栅 Fiber Bragg Grating 光纤模块、有源光缆及有源电缆 Fiber Optic Transceivers,AOC&DAC

型号- FOT-SC/APC,CG-XX/G652D/1.5M,D12F-SC/UPC/SM/∅0.9/L/L1M,SMC-P-1X2-163/15-10/90-FC/APC-1-G652D-∅3X60,FEN-SC-S4,FEN-SC-S5,MC-FC/APC-FC/UPC/SM/∅3/L,FEN-SC-S1,PM-FC/UPC(N)-FC/UPC(N)/1550/∅2/L-SA,FEN-SC-S2,FEN-SC-S3,ATIL-FC/APC/SM/05/NP/L,MPO/APC/12F-FC/UPC/SM/∅0.9-L/L1-RJ,PLC-1X8-A-09/L1-LC/UPC-09/L2-LC/UPC

选型指南 - 太辰光 - 201905 PDF 中英文下载