What Environment is Suitable for Using Industrial Routers?

Industrial routers can be installed indoors or outdoors, in corners or on desktops, in mountains or underground, and anywhere with a signal. However, in order to guarantee the best performance of an industrial router, it is best to choose the best location to get the signal and configure the responsive environment.

What are the environmental standards for using an industrial router? Or what environment is suitable for 4G industrial routers?

1. High and low temperatures

Civilian routers usually operate in a range of 10-40 degrees, which is also the temperature suitable for indoor human living environments (too low or too high can cause illness). Industrial routers usually operate at -25 to -40 degrees Celsius at low temperatures and 70 to 85 degrees Celsius or higher at high temperatures. Such a wide temperature range is suitable for a variety of harsh industrial application environments, such as underground, mountainous areas, DAMS, water conservancy, etc.

2. Dust environment

Dust environment not only has a bad effect on human lungs and respiratory tract but also interferes with signal transmission. When the dust density is too high, the precision of the machine will be inaccurate, and the main machine of the dust card can not carry out the effective operation. In the process of signal transmission, there will be an intermittent connection state, affecting the whole network transmission process. Some factories have reported serious economic losses due to lax dust control in the production environment.

3. Power supply stability

The root cause of power instability mainly has two aspects: one is the transient AC current under the high-speed switching state of the device is too large; The second is the inductance in the current circuit. When there is weak inductance and the power supply cannot work stably, the whole network transmission work is intermittent, and the data transmitted will be incomplete. An unstable power supply is like an unstable foundation for a building and cannot be built in a tall building.

4. Be impact-resistant

Impact resistance is the embodiment of hardware protection for industrial routers. For example, anti-surge, anti-static, anti-pulse, anti-lightning protection, and other hardware protection can help industrial routers ensure that they are not affected by the external influence environment. At the same time, hardware network protection can promote the industrial router 7 lock word 24 hours of stable operation, without stopping.

5.RS232/485 serial port

Networking through serial ports is common in industrial transmission environments. Therefore, industrial routers reserve serial ports. Even if traditional industrial routers do not have RS232/485 serial ports, they can be customized and added according to customer requirements. For example, some people's industrial routers, most industrial routers sold usually do not have a serial port, but can be added at any time if the customer has a serial port requirement. Traditional products do not have serial ports, which also saves customers' network costs. But you have a need for serial port networking that can be met at any time.

In addition, if the data being transmitted is private, it can also be transmitted over an industrial router's APV/VPN private network to ensure the security and reliability of the data.

When installing an industrial road, the industrial router must be placed horizontally and as high as possible to facilitate signal reception and proximity to the computer. Also, keep the antenna vertical to avoid networking in wet environments. For better signal access, do not place the 4G industrial router in a hidden environment, away from interference sources such as metal partitions and high-voltage cables.

What are the environmental requirements for installing an industrial router?

Windows-based PC/at compatible computers or Ethernet data devices, including the RJ-45 interface, support 10/100Mbps data transfer rates.

The TCP/IP networking protocol must be installed on each workstation.

RJ-45 Ethernet twisted pair for connecting to Ethernet.

InternetExplorer5.0 or later to test networking success, you can go to the Settings page to set it up.

An AC power outlet.

Features of an LTE 4g router

LTE 4g router uses industrial grade network chip and sophisticated circuit design and has stronger stability.

LTE 4g router use ultra-high reliability materials, with stronger anti-electromagnetic interference, anti-dust, anti-water, anti-moisture, and other functions.

LTE 4g routers are widely used in industrial automation control, intelligent logistics, intelligent manufacturing, remote monitoring, and other fields.

Application scenarios of LTE 4g router

Industrial automation control: LTE 4g router can be used to monitor production equipment, control the production process, and realize automatic control.

LTE 4g router can be used to achieve logistics management, vehicle scheduling, cargo tracking, and other functions to improve logistics efficiency and security.

LTE 4g router can be used to realize networking, data acquisition, and remote monitoring of production lines, improving production efficiency and quality.

LTE 4g router can be used for remote monitoring of various equipment, machines, environment, etc., with real-time response function.