Vincotech’s Power Modules‘ Current Carrying Capability of a Standard Solder Able Pin and a Press-fit Pin

时间： 2022-01-25 来源：Vincotech

代理服务

技术支持

采购服务

1 Abstract

This application note investigates the current carrying capability of a standard solder able pin and a Press-fit pin for VINCOTECH’s power modules. The measurements are carried out on an application board with boundary conditions comparable to real application.

2 Introduction

The Press-fit pin technology is a solder-less connection method, which ensures reliable mechanical and electrical contact. The Press-fit pin design contain a mechanism that allows plastic deformation when the pin enters the hole and creates a highly reliable, well accepted, gas tight cold-welded connection. The Press-fit pin was developed as a one-to-one replacement for the solder pin. This means that all Vincotech power modules can easily be equipped with the Press-fit pin and do not require a PCB layout change by the customer.

3 Current carrying capability of pins

The current carrying capability of Press-fit pins was tested against standard soldered pins. As it was mentioned earlier one of the design targets was to create the possibility that the soldered and the Press-fit modules should be replaceable one to one. It requires that the current carrying capability of the Press-fit version is similar to the standard pin.

Different track widths were tested to get a good comparison. The Figure 1 illustrates the test board used for the measurements, and the temperature distribution of a pin. The PCB consists of 4 layers. The two outer layers have 105 µm copper and the two inner layers which are placed only around the holes have 35 µm copper thickness. The surface finish of the FR4 PCB is immersion tin. The copper thickness of the through holes is 25 µm. Figure 2 shows the current carrying capability of one pin inserted or soldered in a 250 mil wide track. The modules were mounted to a heat sink with thermal grease P12 from Wacker. The heat sink had a temperature of approx. 30 °C.

The measurement was done with the help of an infrared camera and the temperature of the hottest point was defined. See Figure 2. The results show a very similar temperature rise for both types of pins at a given current. Other parameters, like ambient temperature, the number and thickness of copper layers can influence the current carrying capability of the pins, thus in some cases it makes sense to test it for the specific application.

4 Conclusion

Solder and press-fit pin show very similar temperature rise at a given current and have thus the same current carrying capability.

发送到邮箱 |
+1 赞 0
收藏
评论 0
| 转发至：

本文由扶摇转载自Vincotech，原文标题为:Current carrying capability of solder and press-fit pins，本站所有转载文章系出于传递更多信息之目的，且明确注明来源，不希望被转载的媒体或个人可与我们联系，我们将立即进行删除处理。

全部评论（0）

暂无评论

Vincotech Offers Power Modules for 3 Main Photovoltaic (PV) Applications/Inverters

VINco X modules meet the demanding requirements for central inverters, while retaining the string inverter‘s speed and flexibility. Add-ons such as integrated snubber capacitors and asymmetric inductance are available to make this an even more persuasive package. The terminal connection allows DC and AC stages to be split, which makes busbar design that much easier.

2021-05-24 - 原厂动态代理服务技术支持采购服务

Highly Integrated and Ultra Compact Power Modules for Embedded Drive Applications

The outstanding level of integration achieved by Vincotech’s intelligent power modules enables system engineers to come up with more compact designs and to take advantage of a proven combination of power components and gate drive circuits, which happen to be the most critical elements in the inverter’s design. This mitigates the risk associated with circuit design, speeds up development, and dramatically reduces time to market.

2021-05-27 - 原厂动态代理服务技术支持采购服务

电源模块包装盖形状变更（FLOW0，FLOW90 0）（2024-009）

描述- Vincotech发布产品变更通知，宣布对部分功率模块的包装盖形状进行微小调整，以优化包装过程。此次变更不影响产品功能，仅涉及包装设计。受影响的型号包括所有*flow*0和*flow*90 0尺寸的功率模块。新修订版本将于2024年4月10日发布，首批样品预计于2024年8月5日前提供。客户无需确认此变更，但应在收到通知后30天内知悉。

2024-Apr-10 - VINCOTECH - 产品变更通知及停产信息代理服务技术支持采购服务

10-FZ12NMA080SH01-M260F电源模块规格书

描述- 该资料为Vincotech公司生产的10-FZ12NMA080SH01-M260F模块的技术规格书。文档详细介绍了该模块的最大额定值、特性值、开关特性曲线等，适用于太阳能逆变器（Solar Inverter）和不间断电源（UPS）等领域。

型号- 10-FZ12NMA080SH01-M260F-7,10-FZ12NMA080SH01-M260F,10-FZ12NMA080SH01-M260F-3

11 Sep. 2021 - VINCOTECH - 数据手册 - Revision 11 代理服务技术支持采购服务

Save up to 15% on System Costs with Vincotech‘s MiniSKiiP®DUAL Power Modules Product Line

With the addition of the MiniSKiiP®DUAL to our line of standard MiniSKiiP® power modules, a single platform now covers a very wide power range extending all the way up to 90kW for 650V and 1200V applications.

2023-11-23 - 产品代理服务技术支持采购服务

Vincotech‘s 1200V flowIPM 1C Power Modules with Higher Integration and more Sophisticated Subsystems

Catering to manufacturers seeking higher integration and more sophisticated subsystems to cut systems‘ cost and assembly time, Vincotech‘s 1200V IPM achieves the deepest level of integration of any power module available on the market today.

2023-10-27 - 产品代理服务技术支持采购服务

Vincotech’s 650, 900, and 1200V Versions H-bridges Power Modules are Engineered to Fit Your Tech Specs and Business Needs

Vincotech’s 650, 900, and 1200V versions featuring multi-sourced IGBTs, Si-MOSFETs, and SiC-MOSFETs satisfy your voltage level, current rating, and component technology needs.

2023-11-01 - 产品代理服务技术支持采购服务

New Flow E SiC MOSFET-based Modules Can Extend The Power Cycling Lifetime by A Factor of 2 | Vincotech

The new flow DUAL SiC E1 and fastPACK SiC E1/E2 have been developed with the aim to make the EV offboard charger designs faster, smaller and more efficient. The modules are based on latest 650V and 1200V SiC MOSFET chip generations with an on-resistance as low as 5mOhm.

2021-05-13 - 新产品代理服务技术支持采购服务

30-P2126PA150M7-L280F79Y flowPACK 2 1200V/150A电源模块数据表

描述- 本资料为Vincotech公司生产的30-P2126PA150M7-L280F79Y模块型功率器件的数据手册。该模块包含一个1200V/150A的IGBT和一个反向并联二极管，适用于工业驱动、电源和UPS等领域。

型号- 30-P2126PA150M7-L280F79Y-/3/,30-P2126PA150M7-L280F79Y

05 Sep. 2021 - VINCOTECH - 数据手册 - Revision 4 代理服务技术支持采购服务

Real Chip-level Multi Sourcing - The Multi-sourced Power Modules Featuring IGBT M7 for Motion Control Applications

Vincotech‘s range of multi-sourced power modules for motion control applications just got bigger with a set of products featuring IGBT M7 chips. Featuring sixpack and PIM topologies these product families not only offer superior performance but also multiple sourcing for the highest supply chain safety.

2023-10-26 - 产品代理服务技术支持采购服务

Faster, Cooler ＆ More Efficient DC EV Charging：Vincotech’s FlowANPFC and Flow3xANPFC Power Modules

All Vincotech‘s power modules come in industry-standard compact, low-inductive packages with press-fit pins. They now also feature the latest advance in die-attach technology.

2021-11-23 - 新产品代理服务技术支持采购服务

Vincotech‘s PFC Module flowANPFC 0: Here To Gear Up Three-phase Applications

Vincotech‘s flowANPFC 0 power modules featuring an advanced neutral boost PFC topology are aimed to help vendors step up efficiency and drive down costs. This ultra-compact module packs a lot of power into a petit housing.

2023-10-13 - 产品代理服务技术支持采购服务