Bidirectional Converter with Regulated Output Voltage Reference Design Board featuring ePower™ Chipset launched by EPC

时间： 2022-01-28 来源：EPC

代理服务

技术支持

现货查询

批量订货

EPC announces the availability of the EPC9170, a 2kW, two-phase 48V – 14V bidirectional converter that operates with 96.8% peak efficiency in a small footprint. The board features the ePower™ 100V, 65A integrated circuit chipset. The chipset includes the EPC23101 eGaN^® IC plus EPC2302 eGaN^® FET for a solution capable of a maximum withstand voltage of 100V, delivering up to 65A load current, while capable of switching speeds greater than 1MHz.

The fast-switching speed and low losses of the gallium nitride (GaN) devices allow the converter to operate at 500kHz, which significantly reduces the size of the solution and exceeds 96.5% efficiency between 60A and 110A with 95.8% efficiency at 140A.

Key features of the EPC23101 integrated circuit used on the EPC9170 include integrated high-side FET with 3.3mOhm max R_DS(on) with gate driver, input logic interface, level shifting, bootstrap charging, gate drive buffer circuits, and gate driver output to drive external low-side eGaN FET. The integration of the driver further simplifies the design and reduces parasitics.

The EPC2302 eGaN FET featured on the EPC9170 offers a super small typical R_DS(on)of just 1.4mOhm, together with very small Q_G, Q_GD and Q_OSS parameters for low conduction and switching losses.

The EPC23101 and EPC2302 feature a thermally enhanced QFN package with exposed top and optimized pinout between the two devices. The combined chipset footprint is 7mm x 5mm, offering an extremely small solution size for the highest power density applications.

“eGaN FETs and ICs provide the fast switching, small size, and high efficiency needed to further reduce the size and weight of 48V to 12V and 14V converters,”said Alex Lidow, CEO of EPC.“The EPC9170 is an ideal example of the capabilities of the new ePower Chipset to increase frequency and efficiency to allow smaller inductance for fewer phases and higher power density in space and weight critical designs.”

发送到邮箱 |
+1 赞 0
收藏
评论 0
| 转发至：

本文由董慧转载自EPC，原文标题为:2 kW, 48 V/14 V, Bidirectional Converter with Regulated Output Voltage Reference Design Board featuring ePower™ Chipset launched by EPC，本站所有转载文章系出于传递更多信息之目的，且明确注明来源，不希望被转载的媒体或个人可与我们联系，我们将立即进行删除处理。

提交评论

全部评论（0）

暂无评论

【产品】EPC新型200V eGaN FET的性能相比传统Si MOSFET提高了一倍

EPC推出新型200V eGaN FETs（氮化镓增强型功率晶体管），相比于传统的硅功率MOSFET的性能提高了一倍。新第五代设备的尺寸仅为上一代产品的一半，栅电极和源电极之间的距离有所减小，金属层的厚度增加等诸多改进使第五代FET的性能提高了一倍。

2020-11-04 - 新产品代理服务技术支持批量订货

eGaN FETs Are Low EMI Solutions!

GaN FETs can switch significantly faster than Si MOSFETs causing many system designers to ask − how does higher switching speeds impact EMI? In this blog, EPC discusses simple mitigation techniques for consideration when designing switching converter systems using eGaN® FETs and will show why GaN FETs generate less EMI than MOSFETs, despite their fast-switching speeds.

2020-08-15 - 新产品代理服务技术支持批量订货

EPC Launches 40V EPC2055 eGaN FET Ideal for High Power Density Solutions for USB-C Battery Chargers and Ultra-thin Point-of-Load Converters

December 2020 — Efficient Power Conversion (EPC) Corporation advances the performance capability of low voltage, off-the-shelf gallium nitride transistors with the introduction of the EPC2055 (3mΩ, 40V) eGaN FET. This device is ideal for applications with demanding requirements for performance in space-constrained form factors including USB-C batter chargers and ultra-thin point-of-load (POL) converters.

2021-01-26 - 新产品代理服务技术支持批量订货

EPC eGaN®FET/晶体管选型表

EPC提供增强型氮化镓半桥功率晶体管/增强型功率晶体管/功率晶体管的选型：配置：Dual Common Source、Dual with Sync Boot、Half Bridge、Half Bridge Driver IC、HS FET + Driver + Level Shift、Single、Single - AEC Q101、Single – Rad Hard、Single with Gate Diode、Single with Gate Diode – AEC-Q101、Dual Common Source - AEC Q101，VDS最大值（V）：15~350V；VGS最大值（V）：5.75~7V

Max RDS(on) (mΩ) @ 5 VGS