MPS ＆ EPC Redefine DC-DC Power Conversion with 48V – 6V LLC Module Family for High-Density Computing and Data Centers
January, 2021 − Monolithic Power Systems, Inc. (MPS) , a leading company in high-performance power solutions, announced the launch of a new family of 48V – 6V digital DC-DC power modules for 48V Data Center Solutions, utilizing eGaN® transistors from Efficient Power Conversion (EPC) Corporation. These power modules target applications for high density computing and data centers, artificial intelligence, machine learning, and multi-user gaming.
The combination of MPS controllers with ultra-efficient eGaN® FETs from EPC enable best-in-class power density of 1700 W/in³ in high efficiency, low cost LLC DC-DC Conversion.
The MPC1100-54-0000 is the first in the new product family that will include modules in an LLC topology that utilize eGaN FETs to achieve an overall efficiency above 97% in a footprint of only 27mm×18mm×6mm for 48V – 6V conversion. A key advantage of 48V – 6V front-end conversion includes the enabling of a high frequency secondary stage that is small enough to be placed much closer to the xPU/ASIC/GPU to reduce the power distribution loss by 4× compared to the commonly used STC topology for 48V – 12V conversion.
For high-density server applications, record power density and efficiency can be achieved with simple, low cost topologies such as an LLC DC-DC converter. eGaN FETs are well suited for LLC converters due to their combined low gate charge with 5V gate operation that yields very low gate power consumption, ultra-low on-resistance, and low output capacitance charge.
With power levels ranging from 300W to 1000W, these modules are scalable to accommodate a range of high current and high power applications. Customers can add up to three modules to address higher power requirements, or scale down to one or two modules for lower power requirements.
“The 48V – 6V module family offers an extremely powerful and versatile solution set for high-performance computing, high-density data centers, and artificial intelligence systems migrating to the 48V power distribution architecture,” said Maurice Sciammas, Sr. VP Marketing & Sales, MPS. “With the EPC devices inside our modules, we can increase power density significantly to meet the demanding requirements of these advanced applications.”
“Advanced computing applications are putting higher demands on power converters, and silicon-based power conversion is not keeping pace,” said Alex Lidow, CEO of EPC. “We are delighted to work with MPS, a leader in this space, to implement GaN into their modules, allowing customers to increase the efficiency, shrink the size, and reduce system cost for 48V power conversion.”
- |
- +1 赞 0
- 收藏
- 评论 0
本文由宝丁转载自EPC，原文标题为:MPS & EPC Redefine DC-DC Power Conversion with 48 V – 6 V LLC Module Family for High-Density Computing and Data Centers，本站所有转载文章系出于传递更多信息之目的，且明确注明来源，不希望被转载的媒体或个人可与我们联系，我们将立即进行删除处理。
相关推荐
eGaN FETs Are Low EMI Solutions!
GaN FETs can switch significantly faster than Si MOSFETs causing many system designers to ask − how does higher switching speeds impact EMI? In this blog, EPC discusses simple mitigation techniques for consideration when designing switching converter systems using eGaN® FETs and will show why GaN FETs generate less EMI than MOSFETs, despite their fast-switching speeds.
【产品】EPC新型200V eGaN FET的性能相比传统Si MOSFET提高了一倍
EPC推出新型200V eGaN FETs（氮化镓增强型功率晶体管），相比于传统的硅功率MOSFET的性能提高了一倍。新第五代设备的尺寸仅为上一代产品的一半，栅电极和源电极之间的距离有所减小，金属层的厚度增加等诸多改进使第五代FET的性能提高了一倍。
EPC Launches 40V EPC2055 eGaN FET Ideal for High Power Density Solutions for USB-C Battery Chargers and Ultra-thin Point-of-Load Converters
December 2020 — Efficient Power Conversion (EPC) Corporation advances the performance capability of low voltage, off-the-shelf gallium nitride transistors with the introduction of the EPC2055 (3mΩ, 40V) eGaN FET. This device is ideal for applications with demanding requirements for performance in space-constrained form factors including USB-C batter chargers and ultra-thin point-of-load (POL) converters.
【经验】eGaN FET EPC2016C开发板EPC9126的调试技巧分享
EPC9126是EPC公司推出的针对eGaN FET EPC2016C的demo板，在调试过程中经常会碰到各种问题，本文就调试步骤做一下总结。1、确认5V电源是否正确。2、确认信号发生器PWM信号是否正确，符合要求的应该是5V幅值，占空比为50%的输入信号。3、J8端信号确认，主要是确认开发板U3/U5芯片没有损坏。
BRC Solar Selects EPC 100V eGaN FETs for Next Generation Solar Optimizer
Designing EPC‘s EPC2218 100V FETs into BRC Solar GmbH‘s next generation M500/14 power optimizer has enabled a higher current density due to the low power dissipation and the small size of the GaN FET making the critical load circuit more compact.
【应用】eGaN FET EPC2051助力激光雷达发射端高功率纳秒级别脉冲设计
在激光雷达的发射链路中，为实现雷达高分辨率的设计，需产生高功率、纳秒级别的激光脉冲。要达到这样的设计要求，普通MOS不能满足要求，需要采用GaN 搭配高功率Laser器件进行实现。EPC2051是EPC公司生产的氮化镓场效应晶体管（eGaN FET），已经成功的应用在激光雷达上。
【经验】EPC eGaN FET和eGaN IC PCB封装设计指南
一个良好的PCB封装设计对于GaN器件的一致性和可靠性是很重要的。本文是根据数据手册为EPC器件设计正确封装的指导原则——以EPC2016C和EPC2045为例，分别从LGA和BGA封装来完成介绍。
How to Design a 12V-to-60V Boost Converter with Low Temperature Rise Using eGaN FETs
This Talk EPC will examine the design of a 12V to 60V, 50W DC/DC power module with low temperature rise using eGaN FETs in the simple and low-cost synchronous boost topology.
EAS egallium氮化物放大器2.1评估套件Class-D高性能egallium氮化物FET放大器平台
描述- 该资料介绍了EAS eGaNAMP 2.1评估套件，这是一款高性能的eGaN FET放大器平台。该平台包括eGaNAMP2016放大器模块、D2Audio DAE-3HT/DAE-6控制器/数字信号处理器，支持立体声、2.0和2.1通道音频配置。平台提供高保真音频参考，支持多种音频输入源接口，包括立体声模拟音频输入、光S/PDIF数字音频输入和AES-EBU数字音频输入。此外，该平台具有完全可编程的DSP前端，支持USB接口进行编程，并兼容D2Audio DAE-3、DAE-3HT和DAE-6 IC。
【应用】eGaN FET EPC2007C成功助力16线、32线等多线激光雷达发射端纳秒级别脉冲设计
在激光雷达的发射链路中，为实现雷达高分辨率的设计，需产生高功率、纳秒级别的激光脉冲。要达到这样的设计要求，需要采用GaN搭配高功率Laser器件来实现。EPC2007C为EPC的氮化镓场效应晶体管（eGaN FET），已经成功的应用在16线、32线等激光雷达设计上。
电子商城
服务
可定制电感最大电流100A，尺寸最小7 x 7 x 3.0mm到最大35 x 34 x 15.5 mm，工作频率100KHZ ~ 2MHZ，感值范围：0.15 ~ 100uh；支持大功率电感，扁平线电感，大电流电感，高频电感，汽车电感器，车规电感，一体成型电感等定制。
最小起订量： 5000 提交需求>
授权代理品牌：集成电路
授权代理品牌：分立元件
授权代理品牌：接插件及结构件
授权代理品牌：部件、组件及配件
授权代理品牌：电源及模块
授权代理品牌：电子材料
授权代理品牌：仪器仪表及测试配组件
授权代理品牌：电工工具及材料
授权代理品牌：机械电子元件
授权代理品牌：加工与定制
我要提问
登录 | 立即注册
提交评论