Selection and Detection of Fiber Optic Patch Cord
fiber optic cable patch cord is widely used in communication rooms, home optical fiber, local area networks, optical fiber sensors, optical fiber communication systems, optical fiber connections, transmission equipment, etc. It is suitable for cable TV, telecommunication, computer optical fiber, and optical test equipment.
Ⅰ. Selection of fiber optic cable patch cord
According to the termination type, the Fiber Optic Patch Cord types
mainly are ST-ST, SC-SC, and ST-SC. According to the kind of optical
fiber, there are mainly single-mode optical fiber and multimode optical
fiber.
The fiber optic cable patch cord length specifications include 0.5m, 1m, 2m, 3m, 5m, 10m, etc.
According to the material of the outer cable sheath, it can be divided into ordinary type, ordinary flame retardant type, low smoke halogen-free type (lzsh), low smoke halogen-free flame retardant type, etc. According to the fire rating of buildings and fire resistance requirements for materials, corresponding measures shall be taken for the generic cabling system.
Flame retardant cables and optical cables shall be used for laying cables or optical cables in flammable areas and building shafts. Flame retardant, low smoke, and low toxicity cables or optical cables should be used in large public places; Flame retardant wiring equipment shall be used in adjacent equipment rooms or handover rooms.
Ⅱ. How to check whether the fiber optic patch cord is qualified
Firstly, use the light pen to measure whether the patch cord is lit and confirm that the optical fiber is not broken. Then use the plug-back loss instrument to test. General carrier level test indicators: insertion loss is less than 0.3dB, and return loss is greater than 45dB.
The performance test of the fiber optic patch cord is divided into:
1. Optical performance test
Including the return loss/insertion loss test. The test instrument can use the return loss/insertion loss integrated tester.
2. End face geometry test
The parameters tested include a radius of curvature, vertex offset, fiber height, etc. The test instrument is an interferometer.
3. Scratch detection of the optical fiber end face
The video optical fiber magnifying glass can give the clearest image for observation, and the operation is effortless. Some customers also use a variable magnification to detect. The instrument integrates 400, 200, and 80 magnification, which can clearly and conveniently observe the end face of optical fiber and plug-in end face. Of course, you can also use relevant software for automatic inspection.
4. Optical fiber tension test
It is necessary to test the tensile force that the optical fiber connector can withstand.
5. Ambient temperature experiment
It is necessary to test the performance index of optical fiber connectors under different ambient temperatures.
As an experienced fiber patch cord manufacturer, T & S communications quality control includes a set of methods to maintain standards in the production line and each process. T & S communications integrate quality control into methods, equipment, techniques, and products and always conducts spot checks on products or procedures for daily inspection to maintain standards.
- |
- +1 赞 0
- 收藏
- 评论 0
本文由出山转载自T&S News，原文标题为:Selection and Detection of Fiber Optic Patch Cord，本站所有转载文章系出于传递更多信息之目的，且明确注明来源，不希望被转载的媒体或个人可与我们联系，我们将立即进行删除处理。
相关推荐
Type Selection and Application of Fiber Transceiver
Although optical modules are a trend to replace fiber transceivers, there is still a relatively large user base for fiber transceivers. For example, fiber transceivers are still commonly used transmission products in monitoring systems.
What Are the Advantages of OM5 Fiber Patch Cables Compared to OM3 and OM4?
“OM“ in optical communication refers to “Optical Multi-mode“, optical mode, which is a standard for multimode fibers to express fiber grades. At present, the fiber patch cord standards defined by TIA and IEC are OM1, OM2, OM3, OM4 and OM5.
What Are Simplex and Duplex Fiber Patch Cords?
Optical fiber jumpers can be divided into simplex and duplex according to the working mode of the interface. What are simplex and duplex? Simplex and duplex are two modes of communication channels in telecommunications and computer networks.
太辰光（T&S）光纤连接器选型指南
目录- 公司简介 Company profile 陶瓷插芯 Ceramic Ferrule 光纤连接器 Fiber Optic Cable Assembly 光纤元器件 Fiber Optic Components 波分复用器 WDM FBT光纤耦合器 FBT Coupler PLC分路器 PLC Splitter 光纤光栅 Fiber Bragg Grating 光纤模块、有源光缆及有源电缆 Fiber Optic Transceivers,AOC&DAC
型号- FOT-SC/APC,CG-XX/G652D/1.5M,D12F-SC/UPC/SM/∅0.9/L/L1M,SMC-P-1X2-163/15-10/90-FC/APC-1-G652D-∅3X60,FEN-SC-S4,FEN-SC-S5,MC-FC/APC-FC/UPC/SM/∅3/L,FEN-SC-S1,PM-FC/UPC(N)-FC/UPC(N)/1550/∅2/L-SA,FEN-SC-S2,FEN-SC-S3,ATIL-FC/APC/SM/05/NP/L,MPO/APC/12F-FC/UPC/SM/∅0.9-L/L1-RJ,PLC-1X8-A-09/L1-LC/UPC-09/L2-LC/UPC
太辰光（T&S）光纤通信产品选型指南
目录- 公司简介 陶瓷插芯 常规光纤连接器 IEC分级跳线 MPO/MTP多芯连接器 机箱和模块盒 标准测试线 保偏光纤连接器 光收发组件 高速光模块/AOC线缆连接方案 光纤回路器/衰减器 连接头/适配器/终端器 熔融拉锥耦合器和PLC光分路器 波分复用器 光模块及有源光缆 高速线缆 光纤光栅
型号- TSSLS-NCNEE3C,400G QSFP-DD TO 4X100G QSFP56 AOC,200G QSFP56 SR4,400G QSFP-DD TO 8X50G SFP56 DAC,TSSLS-NXXCE3T,TSQM4-NAAJB1C,TSQS-PC40G-XXM,TSD4Q-85M-XXXC,TS-RD1,TS-RD1-1U,TSD8S-85M-XXXC,TSQSQ-85G-XXXC,TSQ45-85G-XXXC,TSQM4-NAAJB1T,TS-FD2,TSSLS-NXXCE3C,TS-FD1-1U,TS-FD1,40G QSFP+TO 4X10G SFP+DAC,PD2-6M,TSSLS-NCNEH8C,40G QSFP+ TO 4X10G SFP+ AOC,TSQS-PC56G-XXM,FEN-LH-SMA,TS-FD2 SERIES,56G QSFP+DAC,40G QSFP+ ER4,TSQD-PC4HG-XXM,200G QSFP56 AOC,10G SFP+ ZR,FEN-LH-LC,100G QSFP28 PSM4,TSSLS-CXXEE3C,25G SFP28 SR,TSSLS-NAACBIT,TSSLS-NAAEAIT,TSQDQ-4PC1HG-XXM,100G QSFP28 AOC,TSSLS-NAACB1C,TSSLS-NAAEA1C,FEN-LH-SDL,10G SFP+ DWDM,MD2-1M24L,TSQL4-E11GH7C,TSQSS-PC2HG-XXM,TSQL4-F22JH4C,FES-LC-PA,25G SFP28 DAC,25G SFP28 CWDM,400G QSFP-DD DAC,400G QSFP-DD DR4,TSSLS-NCNCE3C,400G QSFP-DD TO 2X200G QSFP56 DAC,MD1-3M24L,TSSP-PC25G-XXM,TSD2Q-85L-XXXC,200G QSFP56 TO 4X50G SFP56 AOC,56G QSFP+ AOC,TSSP-PC56G-XXM,TSQS-PC2HG-XXM,100G QSFP28 SR4,10G SFP+ LR,TSQM4-NCNJC3C,TSQSS-PC1HG-XXM,TS-RD1 SERIES,TSSSS-85H-XXXC,TSQDQ-2PC2HG-XXM,50G SFP56 AOC,40G QSFP+ DAC,TS-FD1 SERIES,TSQSQ-85H-XXXC,TSQM4-NAALAIC,FEN-SC-FUNNEL-1,PD2-24L,FEN-SC-FUNNEL-2,TSQM4-NAAGB1C,TSQM4-NAAGBIT,TSSSS-85E-XXXC,40G QSFP+ LR4,TSSLS-CXXCE3C,FES-SC-PA,TSQS-PC1HG-XXM,200G QSFP-DD TO 2X100G QSFP28 AOC,100G QSFP28 TO 2X50G QSFP28 AOC,TSSLS-DXXEE4C,10G SFP+ DAC,25G SFP28 BIDI,TSSLS-NCNEE3T,100G QSFP28 LR4,TSQ4S-85L-XXXC,TSQSQ-85L-XXXC,100G QSFP28 DAC,TSDM4-NCNMC3C,25G SFP28 ER,10G SFP+ AOC,10G SFP+ BIDI,400G QSFP-DD TO 8X50G SFP56 AOC,800G QSFP-DD AOC,TSQM4-NCNGC3C,TSDR8-NAAMATC,TS-FD2-2U,10G SFP+ CWDM,10G SFP+SR,FEN-LC-2,25G SFP28 DWDM,TSSSS-85C-XXXC,TSDSD-85N-XXXC,100G QSFP28 TO 4X25G SFP28 AOC,TSQDS-8PC50G-XXM,800G QSFP-DD SR8,10G SFP+ ER,200G QSFP56 DAC,100G SFP-DD AOC,TSSLS-DXXCK8C,TSQ2Q-85J-XXXC,TSSLS-NCNCE3T,TSQSQ-PC2HG-XXM,TSD2Q-85M-XXXC,FEN-LH-SC,TSSLS-NXXEE3T,200G QSFP56 FR4,40G QSFP+ AOC,50G SFP56 DAC,100G QSFP28 TO 4X25G SFP28 DAC,100G QSFP28 ER4,FEN-SC-1,TSDSD-85M-XXXC,400G QSFP-DD FR4,TSDL4-E11MD3C,100G QSFP28 CWDM4,TSSLS-NXXEE3C,25G SFP28 LR,40G QSFP+PSM4,TSQL4-F22JE3C,400G QSFP-DD TO 2X200G QSFP56 AOC,TSTST-85K-XXXC,400G QSFP-DD AOC,TSQSQ-85J-XXXC,TSQ4S-85J-XXXC,TSD85-85L-XXXC,TSQL4-E11JE3C,TSDR8-NAANA1C,TSSLS-NCNCKBC,200G QSFP56 TO 4X50G SFP56 DAC,TSQL4-E11LD3C,400G QSFP-DD TO 4X100G QSFP56 DAC,200G QSFP-DD TO 8X25G SFP28 AOC,TSSLS-NCNCH4C,MD1-2M6M,200G QSFP56 TO 2X100G QSFP56 DAC,25G SFP28 AOC,PD1-24L,TSQL4-E11GE3C,400G QSFP-DD SR8,40G QSFP+SR4,TSQSS-PC40G-XXM,TSSLS-DXXCH4C,TSSP-PC192-XXM
TSQM4-NCNGE3C光端机单模40GBase收发器，带诊断监控双工QSFP+PSM4 10km收发器
描述- 本资料介绍了一种四通道全双工光收发器模块，适用于InfiniBand QDR/DDR/SDR、10G/8G/4G/2G光纤通道、PCIe和SAS应用。该模块提供4个独立的发送和接收通道，每个通道可达到11.2Gbps的传输速率，总数据率为40Gbps，使用单模光纤可传输10km。模块具有低功耗、热插拔QSFP形式因素、内置数字诊断功能等特点。
型号- TSQM4-NCNGE3C
Smiths Interconnect 光纤电缆选型指南
目录- Multimode fiber cables product Table General fiber optic information Optical fiber cables
型号- 500-00080,500-00021,500-00043,500-00020,500-00284,500-00085,500-00283,500-00003,500-00002,500-00266,500-00265,500-00022,500-00007,500-00205,500-00268,500-00219,500-00091,500-00274,500-00251,500-00250,500-00271,500-00277,500-00276,500-00017,500-00215,500-00258,500-00257,500-00279,500-00207
为了今天和明天的光纤网络罗森伯格电缆系统光纤和数据通信
型号- RHC-A1211-510,RS14,RS15,RS13,RS04-□□□□-□□□□□-□□□□□,RFC-X002-001-UL,RU04/05,RHC-E0235-549,RB02,RB03,RB01,98A407-003,98A407-002,98A407-001,RFC-F002-567-UL,RS11-□□□□-□□□□-□□□-□□□□□,RS03,RU02-12□-□□02-□□□-□□□□□,RS04,RS01,98A407-007,RS02,98A407-005,98A407-004,98A398,RA53-32□-□□□□-□□□-□□□□□,98A303-002,98A303-001,98A303-004,RA13-1□□-□□□□-□□□-□□□□□,98A303-003,RHC-B012-510,RHC-D012-510,RH03-23-□□02-06A4-006-□□□□□,98A303-005,RHC-D0817-501,RHC-F012-510,RHC-E0617-501,RB03-□□□□-□L-□□□□□,RFC-D002-502-UL,RHC-B0617-501,RFC-C002-003-UL,RHC-F1211-510,RFC-D002-559,RA05,RFC-XXXX-510& RFC- XXXX-532,RB01-□□□□-□T-□□□□□,RS83-□□□□-□□□□-□□□,RA03,RA04,RA01,RA02,RI07,RA02-1□□-□□□□-□□□-□□□□□,RB02-□□□□-□S-□□□□□,RI08,RA09,RA04-1□□-□□□□-□□□-□□□□□,RA05-1□□-□□□□-□□□-□□□□□,98A257,RFC-E002-567-UL,RU00-□□□-□□□□-□□□-□□□□□,RHC-A0817-501,RI14-□□□□-□□-□□□-□□□□□,RFC-A004-559,RI09-□□□□□□-□□-002-□□□□□,RI11-□□□□-□□-□□□-□□□□□,RFC-A001-564,RH02-23-□□02-02A4-004-□□□□□,RFC-D001-564,RU□□-100-□□02-□□□-□□□□□,98A407,98A406,RI10-□□□□□□-□□-002-□□□□□,RH01,RFC-F001-564,RI08-□□□□□□-□□-002-□□□□□,RHC-A3623-532,RH04,RH05,RH02,RH03,RI09,RA10,RI12-□□□□-□□-□□□-□□□□□,RA11,RHC-F0817-501,RHC-D3623-532,RFC-A001-559,RFC-□□□□-569,RFC-□□□□-568,RI10,RI11,RS03-□□□□-□□□□□-□□□□□,RA12,RHC-C006-501,RA13,RI16,RI14,RI15,RI12,RH05-10 -□□01-□□P2-□□-□□□□□,RI13,RU01-121-□□02-□□□-□□□□□,RS13-□□□□-□□□□-□□□-□□□□□,RS14-□□□□-□□□□-□□□-□□□□□,RFC-X002-562-UL,98A406-006,RFC-A002-567-UL,98A406-005,RS83,RHC-D1211-510,98A406-007,RS81,RS82,RHC-B0235-549,RFC-B002-559,RH04-13-□□01-□□P2-□□-□□□□□,98A406-002,98A406-001,98A406-004,RF-□□-□□□,98A406-003,RI15-□□□□-□□-□□□-□□□□□,RHC-C0817-501,98A398-006,RHC-C012-510,98A398-005,RFC-D002-520-UL,RS15-□□□□-□□□□-□□□-□□□□□,RFC-B002-549,98A398-004,98A398-003,98A398-002,RFC-C004-559,98A398-001,RHC-A0617-501,RFC-X002-XXX-UL,RFC-C002-001-UL,RHC-C3623-532,RHC-E1211-510,RHC-A0235-549,211UXX,RU03-12□-□□02-□□□-□□□□□,RS12-□□□□-□□□□-□□□-□□□□□,RFC.B001-559,RFC.D001-559,RA53,RFC-B002-001-UL,RA12-1□□-□□□□-□□□-□□□□□,RHC-F3623-532,RHC-D0235-549,98A303,RFC-A002-001-UL,RHC-B1211-510,RS01-□□□□-□□□□□-□□□□□,RFC-D002-001-UL,RI07-□□□□□□-□□-001-□□□□□,RS82-□□□□-□□□□-002,RA09-1□□-□□□□-□□□-□□□□□,RFC-A002-559,RA03-1□□-□□□□-□□□-□□□□□,211CXX,RHC-E0817-501,RHC-F0617-501,RHC-A012-510,RFC-XXXX-501,RFC-B002-567-UL,RHC-E012-510,RH01-24-□□02-0424-002-□□□□□,RHC-C0235-549,RFC-C001-564,RFC-B002-002-UL,RFC-B001-564,RI16-□□□□-1F-□□□-□□□□□,RFC-E001-564,RFC-C002-567-UL,RA01-1□□-□□□□-□□□-□□□□□,RHC-C1211-510,RFC-F002-001-UL,RU03,RU01,RFC-C001-559,RU02,RU00,RFC-XXXX-570,RA10-1□□-□□□□-□□□-□□□□□,RA11-1□□-□□□□-□□□-□□□□□,RU□□-121-□□02-□□□-□□□□□,RFC-E002-001-UL,RFC-XXXX-569,2112XX,RFC-XXXX-568,RHC-B0817-501,RFC-B004-559,RFC-D004-559,RS81-□□□□-□□□□-001,98A225,RU06/07,RHC-F0235-549,RFC-D002-567-UL,RFC-X001-564,RFC-C002-559,RHC-B3623-532,RI13-□□□□-□□-□□□-□□□□□,RFC-E002-501-UL,RS02-□□□□-□□□□□-□□□□□,RHC-E3623-532,RFC-XXXX-549,RHC-D0617-501
TSQM4-NCNGD3C光端机单模40GBASE收发器，带诊断监控双工QSFP+PSM4 2KM收发器
描述- 该资料介绍了一种四通道全双工光模块，适用于InfiniBand QDR/DDR/SDR、10G/8G/4G/2G光纤通道、PCIe和SAS应用。该模块提供4个独立的发送和接收通道，每个通道的数据传输速率可达11.2Gbps，总数据率为40Gbps，使用单模光纤可传输2公里。模块具有低功耗、热插拔QSFP形式因子、内置数字诊断功能等特点。
型号- TSQM4-NCNGD3C
Types of Fiber Optic Attenuators
A fiber optic attenuator is a passive device used to reduce the power level of an optical signal in free space or in an optical fiber. They have fixed types, step-variable and continuous-variable types.Although fiber optic attenuators are commonly used in SM (single mode) links, since this is where stronger lasers are used for distance transmission, multimode attenuators are also available.The most common version of attenuators is male-to-female.
TSSLS-NFNCK8C光端机1550nm SFP+单模收发器，带诊断监控双工SFP+80km收发器
描述- 本资料介绍了一款1550nm单模SFP+光收发器，适用于10Gbps传输速率，支持80km光纤距离。该产品符合SFF-8472标准，具备高灵敏度APD光电二极管和TIA，支持数字监控功能，适用于10GBASE-ZR/ZW和10G Fiber Channel等应用。
型号- TSSLS-NFNCK8C
What is Armored Fiber Optic Patch Cord and What Are the Characteristics?
Armored patch cord is a special kind of fiber optic patch cord, specially designed with a layer of stainless steel casing to protect the optical fiber. It has the advantages and functions of a standard fiber optic patch cord but also has armored durability.
TSSLS-DXXCK8C光端机DWDM SFP+单模收发器，带诊断监控双工SFP+80KM收发器
描述- 本资料介绍了一种10Gbps SFP+单模光纤收发器，适用于80公里距离的数据传输。该收发器符合SFP+ MSA标准，具备高数据速率、低功耗、宽工作温度范围等特点，适用于10GBASE-ZR/ZW、10G Fiber Channel等应用。
型号- TSSLS-DXXCK8C
Reflex Photonics 光缆选型指南
目录- Optical Fiber Cable Product Table General Fiber Optic Information Optical Fiber Cable Applications Colour Coding for Multimode Ribbon Fibers Fiber Types Connector Fiber Drawings Fiber Cleaning Optical Fiber Cable Application Examples Optical Fiber Cable Product Specification
型号- 500-00021,500-00043,500-00020,500-00042,500-00041,500-00040,500-00003,500-00002,500-00046,500-00023,500-00045,500-00022,500-00044,500-00007,500-00028,500-00005,500-00027,500-00049,500-00050,500-00010,500-00030,500-00051,500-00036,500-00035,500-00012,500-00011,500-00017
Unlocking the Power of Fiber Optic Transceiver Modules
With their scalability, low latency, and high bandwidth, fiber optic transceiver modules are the future of data transmission, revolutionizing the way we connect and communicate in the digital age.
电子商城
授权代理品牌：集成电路
授权代理品牌：分立元件
授权代理品牌：接插件及结构件
授权代理品牌：部件、组件及配件
授权代理品牌：电源及模块
授权代理品牌：电子材料
授权代理品牌：仪器仪表及测试配组件
授权代理品牌：电工工具及材料
授权代理品牌：机械电子元件
授权代理品牌：加工与定制
我要提问
登录 | 立即注册
提交评论