What’s LC Uniboot Patch Cord?

时间： 2023-09-02 来源：T&S News

技术问答

选型帮助

研发客服

商务客服

Standard LC optical patch cords are made up of a pair of fibers that are terminated by a pair of LC connectors and are each wrapped in a separate cable jacket. They usually support the burden of dense port connections from data center environments using multimode fibers. One fiber for Tx and one fiber for Rx are added for every optical port when standard LC optical patch cord fibers are used.

LC Uniboot Patch Cord Structure

When connecting two optical ports, LC uniboot cables require only one fiber to be positioned rather than two, which reduces the amount of space needed on a patch panel by 50%. These cables are built for duplex transmission within a single 2.4mm or 3.0mm cable with two fibers in one cable jacket. LC uniboot fiber patch cords can thus significantly reduce the amount of space needed for cabling. Their design makes it simple to change the polarity of the fibers using only the connectors, there is no need for a specialized tool. This small adjustment can help to connect or disconnect a single fiber patch cable without affecting nearby links. It can also make it easier for fingers to reach and speed up latch release.

Polarity Reversal

The polarity reversal is much simpler when using LC uniboot patch cables. Normally, changing the polarity only requires a few easy steps and no special equipment. Changing the polarity can be done in practice using either of the following two approaches:

The method I: reverse the A and B positions in the connectors for each fiber;

Method II: Rotate the connector 180 degrees.

In addition to saving space and easy polarity reversal, uni-boot LC patch cords offer more possibilities with superior features. Fiber optic network designs can be flexible without having to worry about spacing and polarity issues. Fiber optic cables are much faster with reliable quality, saving a lot of time and money. However, the design and development of LC uniboot patch cords never have never stopped. LC uniboot fiber optic patch cords with push-in plugs facilitate finger access. Connecting and disconnecting a fiber patch cable does not affect the other links around it.

发送到邮箱 |
+1 赞 0
收藏
评论 0
| 转发至：

本文由出山转载自T&S News，原文标题为:What’s LC Uniboot Patch Cord?，本站所有转载文章系出于传递更多信息之目的，且明确注明来源，不希望被转载的媒体或个人可与我们联系，我们将立即进行删除处理。

全部评论（0）

暂无评论

What Are the Advantages of OM5 Fiber Patch Cables Compared to OM3 and OM4?

“OM“ in optical communication refers to “Optical Multi-mode“, optical mode, which is a standard for multimode fibers to express fiber grades. At present, the fiber patch cord standards defined by TIA and IEC are OM1, OM2, OM3, OM4 and OM5.

设计经验发布时间 : 2023-12-22

Understanding the Fire Rating ＆ Jacket of Fiber Optic Cable

The shielding and conductors inside the cable require protection from the jacket since the bare fiber is readily torn. A fiber cable‘s first line of defense against moisture, mechanical damage, flames, and chemicals is its cable jacket.

设计经验发布时间 : 2023-08-12

What is the Minimum Bending Radius of an Optical Fiber Patchcord?

Optical fiber is a fiber made of glass or plastic, and the fiber itself is very fragile and easily broken. Encapsulating the tiny fiber in a plastic jacket allows it to bend without breaking. The cable with the optical fiber wrapped in the protective jacket is the optical cable.

技术探讨发布时间 : 2023-10-08

太辰光（T&S）光纤连接器选型指南

目录- 公司简介 Company profile 陶瓷插芯 Ceramic Ferrule 光纤连接器 Fiber Optic Cable Assembly 光纤元器件 Fiber Optic Components 波分复用器 WDM FBT光纤耦合器 FBT Coupler PLC分路器 PLC Splitter 光纤光栅 Fiber Bragg Grating 光纤模块、有源光缆及有源电缆 Fiber Optic Transceivers,AOC&DAC

型号- FOT-SC/APC,CG-XX/G652D/1.5M,D12F-SC/UPC/SM/∅0.9/L/L1M,SMC-P-1X2-163/15-10/90-FC/APC-1-G652D-∅3X60,FEN-SC-S4,FEN-SC-S5,MC-FC/APC-FC/UPC/SM/∅3/L,FEN-SC-S1,PM-FC/UPC(N)-FC/UPC(N)/1550/∅2/L-SA,FEN-SC-S2,FEN-SC-S3,ATIL-FC/APC/SM/05/NP/L,MPO/APC/12F-FC/UPC/SM/∅0.9-L/L1-RJ,PLC-1X8-A-09/L1-LC/UPC-09/L2-LC/UPC

选型指南 - 太辰光 - 201905 PDF 中英文下载

太辰光（T＆S）成立于2000年，2003年3月通过SGS机构的ISO9001: 2000质量管理体系认证，2003年4月被深圳市科技和信息局认定为深圳市高新技术企业，2010年9月被认定为国家高新技术企业。太辰光（T＆S）的主营业务为各种光通信器件及其集成功能模块的研发，制造和销售。

无源产品光互联基础元器件 PLC晶圆 PLC芯片陶瓷插芯 MT插芯光连接器件高速光块 AOC线缆连接方案常规光纤连接器高密度光纤连接器光纤回路器光接续器件光通信适配器光通信衰减器光通信接头光纤终端器光分路器件光通信耦合器波分复用器 PLC光分路器光通信集成功能模块 MTP-LC模块光模块有源光缆（AOC）高速电缆（DAC）光纤传感光纤光栅（FBG）锁模光栅传感光纤光栅传感光纤光栅串啁啾光纤光栅光纤传感器光纤光栅压力传感器光纤光栅振动传感器光纤光栅应变传感器光纤光栅温度传感器光纤F-P腔超声传感器声像仪光纤光栅传感分析仪高速光纤光栅传感分析仪光纤光栅反射器

授权代理商 - 世强先进（深圳）科技股份有限公司线上商城技术资料

展开

太辰光新型光纤超声传感器，用于捕捉局部放电事件中产生的超声波信号，探测距离可长达1.0m

太辰光始终重视核心技术研究和技术体系建设，着眼用户需求进行技术融合和产品应用开发，不断实现核心技术创新和产品技术突破，其新推出的光纤超声传感器是一种采用法布里-珀罗（F-P）谐振腔作为敏感单元的新型光纤器件，可用于捕捉局部放电事件中产生的超声波（频率≥20 kHz 的声波）信号。

产品发布时间 : 2024-10-26

太辰光（T&S）光纤通信产品选型指南

描述- 深圳太辰光通信股份有限公司成立于2000年，于2016年12月在深圳证券交易所创业板上市，证券代码300570，公司的主营业务为各种光通信器件及其集成功能模块的研发、生产和销售。光通信器件主要包括高密度光纤连接器、常规光纤连接器件、PLC光分路器、波分复用器等无源光器件、光模块、有源光缆等有源光器件以及陶瓷插芯、MT插芯，平面光波导晶圆和芯片等基础元器件。

型号- TSSLS-NCNEE3C,400G QSFP-DD TO 4X100G QSFP56 AOC,200G QSFP56 SR4,400G QSFP-DD TO 8X50G SFP56 DAC,TSSLS-NXXCE3T,TSQM4-NAAJB1C,TSQS-PC40G-XXM,TSD4Q-85M-XXXC,TS-RD1,TS-RD1-1U,TSD8S-85M-XXXC,TSQSQ-85G-XXXC,TSQ45-85G-XXXC,TSQM4-NAAJB1T,TS-FD2,TSSLS-NXXCE3C,TS-FD1-1U,TS-FD1,40G QSFP+TO 4X10G SFP+DAC,PD2-6M,TSSLS-NCNEH8C,40G QSFP+ TO 4X10G SFP+ AOC,TSQS-PC56G-XXM,FEN-LH-SMA,TS-FD2 SERIES,56G QSFP+DAC,40G QSFP+ ER4,TSQD-PC4HG-XXM,200G QSFP56 AOC,10G SFP+ ZR,FEN-LH-LC,100G QSFP28 PSM4,TSSLS-CXXEE3C,25G SFP28 SR,TSSLS-NAACBIT,TSSLS-NAAEAIT,TSQDQ-4PC1HG-XXM,100G QSFP28 AOC,TSSLS-NAACB1C,TSSLS-NAAEA1C,FEN-LH-SDL,10G SFP+ DWDM,MD2-1M24L,TSQL4-E11GH7C,TSQSS-PC2HG-XXM,TSQL4-F22JH4C,FES-LC-PA,25G SFP28 DAC,25G SFP28 CWDM,400G QSFP-DD DAC,400G QSFP-DD DR4,TSSLS-NCNCE3C,400G QSFP-DD TO 2X200G QSFP56 DAC,MD1-3M24L,TSSP-PC25G-XXM,TSD2Q-85L-XXXC,200G QSFP56 TO 4X50G SFP56 AOC,56G QSFP+ AOC,TSSP-PC56G-XXM,TSQS-PC2HG-XXM,100G QSFP28 SR4,10G SFP+ LR,TSQM4-NCNJC3C,TSQSS-PC1HG-XXM,TS-RD1 SERIES,TSSSS-85H-XXXC,TSQDQ-2PC2HG-XXM,50G SFP56 AOC,40G QSFP+ DAC,TS-FD1 SERIES,TSQSQ-85H-XXXC,TSQM4-NAALAIC,FEN-SC-FUNNEL-1,PD2-24L,FEN-SC-FUNNEL-2,TSQM4-NAAGB1C,TSQM4-NAAGBIT,TSSSS-85E-XXXC,40G QSFP+ LR4,TSSLS-CXXCE3C,FES-SC-PA,TSQS-PC1HG-XXM,200G QSFP-DD TO 2X100G QSFP28 AOC,100G QSFP28 TO 2X50G QSFP28 AOC,TSSLS-DXXEE4C,10G SFP+ DAC,25G SFP28 BIDI,TSSLS-NCNEE3T,100G QSFP28 LR4,TSQ4S-85L-XXXC,TSQSQ-85L-XXXC,100G QSFP28 DAC,TSDM4-NCNMC3C,25G SFP28 ER,10G SFP+ AOC,10G SFP+ BIDI,400G QSFP-DD TO 8X50G SFP56 AOC,800G QSFP-DD AOC,TSQM4-NCNGC3C,TSDR8-NAAMATC,TS-FD2-2U,10G SFP+ CWDM,10G SFP+SR,FEN-LC-2,25G SFP28 DWDM,TSSSS-85C-XXXC,TSDSD-85N-XXXC,100G QSFP28 TO 4X25G SFP28 AOC,TSQDS-8PC50G-XXM,800G QSFP-DD SR8,10G SFP+ ER,200G QSFP56 DAC,100G SFP-DD AOC,TSSLS-DXXCK8C,TSQ2Q-85J-XXXC,TSSLS-NCNCE3T,TSQSQ-PC2HG-XXM,TSD2Q-85M-XXXC,FEN-LH-SC,TSSLS-NXXEE3T,200G QSFP56 FR4,40G QSFP+ AOC,50G SFP56 DAC,100G QSFP28 TO 4X25G SFP28 DAC,100G QSFP28 ER4,FEN-SC-1,TSDSD-85M-XXXC,400G QSFP-DD FR4,TSDL4-E11MD3C,100G QSFP28 CWDM4,TSSLS-NXXEE3C,25G SFP28 LR,40G QSFP+PSM4,TSQL4-F22JE3C,400G QSFP-DD TO 2X200G QSFP56 AOC,TSTST-85K-XXXC,400G QSFP-DD AOC,TSQSQ-85J-XXXC,TSQ4S-85J-XXXC,TSD85-85L-XXXC,TSQL4-E11JE3C,TSDR8-NAANA1C,TSSLS-NCNCKBC,200G QSFP56 TO 4X50G SFP56 DAC,TSQL4-E11LD3C,400G QSFP-DD TO 4X100G QSFP56 DAC,200G QSFP-DD TO 8X25G SFP28 AOC,TSSLS-NCNCH4C,MD1-2M6M,200G QSFP56 TO 2X100G QSFP56 DAC,25G SFP28 AOC,PD1-24L,TSQL4-E11GE3C,400G QSFP-DD SR8,40G QSFP+SR4,TSQSS-PC40G-XXM,TSSLS-DXXCH4C,TSSP-PC192-XXM

选型指南 - 太辰光 - 202304版 - 202304 PDF 中文下载