EPC Launches a 3-phase BLDC Motor Drive Inverter EPC9173 with Embedded Gate Driver Function and a Floating Power GaN FET with 3.3mΩ RDS(on)
EPC announces the availability of the EPC9173, a 3-phase BLDC motor drive inverter using the EPC23101 eGaN IC with embedded gate driver function and a floating power GaN FET with 3.3mΩ RDS(on). The EPC9173 operates from an input supply voltage between 20V and 85V and can deliver up to 50Apk (35 ARMS). This voltage range and power level make the solution ideal for a variety of motor drive applications including e-bikes, scooters, city cars, drones, and robotics.
The EPC9173 contains all the necessary critical function circuits to support a complete motor drive inverter including gate drivers, regulated auxiliary power rails for housekeeping supplies, voltage, and temperature sense, accurate current sense, and protection functions.
Major benefits of a GaN-based motor drive are exhibited with these reference design boards, including less than 30ns deadtime for very high motor + inverter system efficiency for longer range, lower distortion for lower acoustic noise, lower current ripple for reduced magnetic loss, lower torque ripple for improved precision, and lower filtering for a lower cost. The lower weight and size of the EPC9173 solution enables the incorporation of the drive into the motor housing and supports low inductance, higher power density motors. When configured for 100kHz frequency, the input filter and the number of capacitors can be dramatically reduced, and the electrolytic capacitors can be eliminated from the board.
The use of the EPC23101 integrated GaN-on-silicon device offers higher performance in a smaller footprint with significantly reduced design engineering requirements for fast time to market. The solution enables phase current sensing and leg shunt current sensing, for maximum flexibility. EPC provides full demonstration kits, which include interface boards that connect the inverter board to the controller board development tool for fast prototyping that reduces design cycle times.
The EPC9173 boards measure just 130mm x 100mm (including the connector). The boards can also be configured for multiphase DC-DC conversion topologies including Buck, Boost, Half-bridge, Full Bridge, or LLC converters.
"Designers can use the GaN IC to make lighter weight and more precise battery-operated motor drives for eMotion, robotic arms, and drones", said Alex Lidow, CEO of EPC. "GaN enables motor systems that are smaller, lighter, less noisy, have more torque, more range, and greater precision."
- |
- +1 赞 0
- 收藏
- 评论 0
本文由Vicky转载自EPC,原文标题为:GaN ICs Shrink Motor Drives for eBikes and Drones,本站所有转载文章系出于传递更多信息之目的,且明确注明来源,不希望被转载的媒体或个人可与我们联系,我们将立即进行删除处理。
相关推荐
【产品】EPC新推三相无刷直流电机驱动逆变器EPC9173,缩小电动自行车和无人机的尺寸
EPC宣布推出基于氮化镓器件的逆变器参考设计的EPC9173,它是一款三相无刷直流电机驱动逆变器;在20V和85V之间的输入电源电压下工作,峰值电流可高达50Apk(35ARMS) ,可用于电动自行车、滑板车、城市汽车、无人机和机器人等电机驱动应用。
EPC Announces a New 3-phase BLDC Motor Drive Inverter Using the EPC2065 EGaN® FET
EPC announces the availability of the EPC9167, a 3-phase BLDC motor drive inverter using the EPC2065 eGaN® FET.
EPC2152 ePower™ Stage – Redefining Power Conversion
The EPC2152 is a single-chip driver plus eGaN® FET half-bridge power stage using EPC’s proprietary GaN IC technology. Input logic interface, level shifting, bootstrap charging and gate drive buffer circuits along with eGaN output FETs configured as a half-bridge are integrated within a monolithic chip. This results in a chip-scale LGA form factor device that measures only 3.9 mm x 2.6 mm x 0.8 mm for an 80 V, 12.5 A gallium-nitride based power stage integrated circuit.
EPC eGaN®FET/晶体管选型表
EPC提供增强型氮化镓半桥功率晶体管/增强型功率晶体管/功率晶体管的选型:配置:Dual Common Source、Dual with Sync Boot、Half Bridge、Half Bridge Driver IC、HS FET + Driver + Level Shift、Single、Single - AEC Q101、Single – Rad Hard、Single with Gate Diode、Single with Gate Diode – AEC-Q101、Dual Common Source - AEC Q101,VDS最大值(V):15~350V;VGS最大值(V):5.75~7V
产品型号
|
品类
|
Configuration
|
VDSmax(V)
|
VGSmax(V)
|
Max RDS(on) (mΩ)
@ 5 VGS
|
QG typ(nC)
|
QGS typ (nC)
|
QGD typ (nC)
|
QOSS typ (nC)
|
QRR(nC)
|
CISS (pF)
|
COSS (pF)
|
CRSS (pF)
|
ID(A)
|
Pulsed ID (A)
|
Max TJ (°C)
|
Package(mm)
|
Launch Date
|
EPC2040
|
Enhancement Mode Power Transistor
|
Single
|
15
|
6
|
30
|
0.745
|
0.23
|
0.14
|
0.42
|
0
|
86
|
67
|
20
|
3.4
|
28
|
150
|
BGA 0.85 x 1.2
|
Apr, 2017
|
选型表 - EPC 立即选型
【经验】EPC推出的用于氮化镓器件的LGA和BGA封装寄生电感低、尺寸小和热性能出色,应用时需考虑相关制造和设计事项
LGA和BGA封装提供了充分利用eGaN技术能力所必需的低寄生电感、小尺寸和出色的热性能。通过适当的制造技术,使用eGaN器件的组件将具有高产量和长而可靠的工作寿命。本文EPC将就LGA和BGA器件封装、正确的焊点大小和回流曲线等展开叙述,这些都是关键的设计考量因素。
EPC9176演示板快速入门指南
描述- EPC9176演示板是一款基于EPC23102 eGaN IC的3相BLDC电机驱动逆变器板,具有14V至65V宽输入直流电压范围。该板可提供高达35Apk(25ARMS)的稳态输出电流和高达40Apk(28.3ARMS)的脉冲输出电流。EPC9176包含所有必要的功能电路,以支持完整的电机驱动逆变器,包括栅极驱动器、辅助电源轨、电压和温度感应、精确的电流感应和保护功能。该板与多种兼容控制器配合使用,支持快速开发。
型号- EPC9176
Efficient Power Conversion to Showcase how GaN is Transforming Power Delivery and Enabling Advanced Autonomy Across Multiple Industries at PCIM 2022
EPC’s GaN Experts will be available during PCIM Europe 2022, exhibiting various demonstrations of how GaN technology’s superior performance is transforming the delivery of power across many industries, including computing, communications, and emobility.
用于机器人和无人机的氮化镓®FET和IC
型号- EPC2212,EPC2214,EPC2059,EPC9003C,EPC2216,EPC2215,EPC2218,EPC2016C,EPC2052,EPC2051,EPC2053,EPC9087,EPC2102,EPC9002C,EPC2104,EPC2103,EPC2106,EPC90151,EPC90152,EPC2221,EPC21701,EPC9014,EPC90150,EPC9097,EPC90142,EPC9098,EPC9099,EPC9092,EPC9093,EPC90147,EPC9091,EPC2036,EPC2035,EPC2038,EPC2037,EPC2014C,EPC2039,EPC9507,EPC2030,EPC2032,EPC2031,EPC2152,EPC2033,EPC9060,EPC9061,EPC9062,EPC2307,EPC9005C,EPC2203,EPC9004C,EPC2204,EPC2015C,EPC2207,EPC2206,EPC2040,EPC9078,EPC2045,EPC2012C,EPC2019,EPC9049,EPC9046,EPC9047,EPC9040,EPC2024,EPC2302,EPC2001C,EPC2029,EPC9010C,EPC2021,EPC2020,EPC9057,EPC2023,EPC2022,EPC9055,EPC9050,EPC9172,EPC9006C,EPC2010C,EPC9001C,EPC23101,EPC23102,EPC23103,EPC23104,EPC9038,EPC2007C,EPC9039,EPC9034,EPC21603,EPC9035,EPC9156,EPC2088,EPC21601,EPC90122,EPC9031,EPC90123,EPC9032,EPC90120,EPC9033,EPC9154,EPC90124
EPC23101-ePower™Stage IC氮化镓®FET规格书
描述- 该资料介绍了EPC23101 ePowerTM Stage集成电路,这是一种集成了高侧eGaN® FET、内部栅极驱动器和电平转换器的高效功率转换解决方案。该芯片适用于多种转换器拓扑,如降压、升压和升降压转换器,以及半桥、全桥LLC转换器和电机驱动逆变器。它具有低导通电阻、高开关频率和低静态电流等特点,适用于高效率、小型化和易于制造的电源设计。
型号- EPC23101
【经验】EPC eGaN FET和eGaN IC PCB封装设计指南
一个良好的PCB封装设计对于GaN器件的一致性和可靠性是很重要的。本文是根据数据手册为EPC器件设计正确封装的指导原则——以EPC2016C和EPC2045为例,分别从LGA和BGA封装来完成介绍。
电机驱动电动汽车·机器人·无人机
型号- EPC9147E,EPC9147C,EPC9147D,EPC9167HCKIT,EPC9186KIT,EPC9167,EPC9167HC,EPC9173,EPC9194KIT,EPC9186,EPC9176,EPC9167KIT,EPC9173KIT,EPC9194,EPC9176KIT,EPC9147A,EPC9147B,EPC9147DKIT
EPC评估套件选型表
EPC提供评估板的选型:Default Configuration:IToF、Resonant Pulse DToF;VBUS (max)(V):12~160V;VINPUT(max)(V):5 V;Tpin(min)(ns):1 ns/2 ns
产品型号
|
品类
|
Description
|
VIN(V)
|
VOUT(V)
|
IOUT (A)
|
Featured Product
|
EPC9163
|
评估板
|
Synchronous, Buck or Boost, digital controller
|
Buck: 20 – 60 V
Boost: 11.3 – 16 V
|
Buck: 5 - 16 V
Boost: 20-50 V
|
140 A (Buck)
|
EPC2218
|
选型表 - EPC 立即选型
EPC Announces EPC9193 eGaN® FET Based 3-Phase BLDC Motor Drive Inverter for Low-Cost E-Bikes, Drones and Robotics
EPC announces the availability of the EPC9193, a 3-phase BLDC motor drive inverter using the EPC2619 eGaN® FET. The EPC9193 operates with a wide input DC voltage ranging from 14V and 65V, and it enhances motor system performance, range, precision, torque, all while lowering overall system cost.
【经验】如何手工焊接组装eGaN®FET或IC
EPC自创的晶圆级封装,包括有平面网格阵列封装(LGA)和球柵网格阵列封装(BGA),使得功率转换性能达到了新的高度。适当的焊接组装技术对于充分利用GaN技术的能力至关重要。本文展示了FET和IC的手工焊接组装指南。
电子商城
服务
可烧录IC封装SOP/MSOP/SSOP/TSOP/TSSOP/PLCC/QFP/QFN/MLP/MLF/BGA/CSP/SOT/DFN;IC包装Tray/Tube/Tape;IC厂商不限,交期1-3天。支持IC测试(FT/SLT),管装、托盘装、卷带装包装转换,IC打印标记加工。
最小起订量: 1pcs 提交需求>
支持GSM / GPRS 等多种制式产品的射频测试,覆盖所有上行和下行的各项射频指标,包括频差、相差、调制、功率、功控、包络、邻道泄漏比、频谱、杂散、灵敏度、同道干扰、邻道干扰、互调、阻塞等等。满足CE / FCC / IC / TELEC等主流认证的射频测试需求。
实验室地址: 深圳 提交需求>
登录 | 立即注册
提交评论