Tips for How to Design The Duplex Hands-free Calling Products of The Microphone

时间： 2021-05-17 来源：KINGSTATE

技术问答

选型帮助

研发客服

商务客服

Due to the global pandemic issue in 2020, many people have had to adapt to an entirely new work style: Working from home. WFM has increased the demand for Speakerphone and video conferencing products that require superior sound quality even in a noisy environment.

It’s important to accelerate the development time, but the engineer needs to spend a lot of time in the mechanical design and sound adjustment of the microphone and speaker; it also requires spending time going to the acoustic lab for fine-tuning frequently. You will miss out on the time to the market if you are not familiar with the design criteria of acoustic components.

Especially the microphone, a highly sensitive acoustic component, not only receives tiny sound signals in the air but also receives the conductive resonance and harmonic distortion from the speaker vibration and mechanism on the product. These non-linear signals will make the DSP can’t effectively process the AEC signal and you will hear the echo sound easily. It will decline the quality of the call or the voice you’d like to catch.

Therefore, here are some tips for how to design the Duplex Hands-free Calling Products of the microphone.

1. Mic Array

Mic Array is formed by 2 to 8 pcs microphones and combined with DSP & Beamforming algorithm; it could achieve Voice Far Pickup & Noise reduction to improve the quality of voice call.

Human ears can distinguish the direction of the sound, we could use 2 microphones to achieve directional sound receive.

2. Mic Sensitivity & Fr

The sensitivity of each microphone of Mic Array should be close to the Fr, ideally is ±1dB, which can reduce the deviation of DSP during calculation, and the total length of the sound tunnel structure should not exceed 5mm and avoid the resonance frequency of the microphone channel <12KHz.

Figure 2. Microphone frequency response matching

Figure 3. Microphone rubber holder and bezel

3. Mic Phase

Every Mic phase should be closer to each other will be better, ideally is ±5∘, it could reduce the time of deviation when DSP is working on calculation and ensure the accuracy of Beam & Directivity.

Figure 4. Microphone phase matching test

4. Mic Rubber Holder Sealing: The microphone rubber holder and Bezel must be truly sealed, and the sound insulation must be at least 20dBSPL to prevent the sound of the internal speaker of the product from entering the microphone's sound tunnel through the rubber gap.

Figure 5a. Microphone rubber holder and bezel sealing

Figure 5b. Microphone record the sound of the speaker (microphone airtight frequency response test)

5. Mic vs Speaker location and shock-proof: Considering the speaker amplification and microphone's AEC signal processing, usually we will put the speaker placed in the middle, and the microphone should be placed far away from the speaker, the microphone also needs to use the rubber to shock-proof and airtight. The box speaker and the shell where contact the surface, screw's hole needs use sponge or rubber holder to avoid the vibration or the microphone will receive the THD signal from the speaker, it will affect the quality of the AEC.

Figure 6a. The position and the distance of the microphone and the speaker

Figure 6b. Microphone record the sound of the speaker (microphone THD test)

If customers could follow the notice above and also follow the Audio Codec Design Guide it could greatly shorten the debugging time and enable the product to be launched on time

发送到邮箱 |
+1 赞 0
收藏
评论 0
| 转发至：

本文由楠木II转载自KINGSTATE，原文标题为:Notice For Designing The Microphone of Speaker Phone，本站所有转载文章系出于传递更多信息之目的，且明确注明来源，不希望被转载的媒体或个人可与我们联系，我们将立即进行删除处理。

全部评论（0）

暂无评论

InvenSense Announces World’s First TDM Microphone with an Array of 16 Devices on a Single Bus

There are a growing number of applications that require multiple microphones to support reliable voice recognition. The ICS-52000 addresses the challenges of interfacing microphone arrays by simplifying system design and significantly reducing overall system cost.

原厂动态发布时间 : 2023-07-02

志丰电子有43年的开发和制造声学组件经验，能提供蜂鸣器和警报器等最佳声音解决方案

Kingstate（志丰电子）在开发和制造声学组件方面拥有43年的经验。蜂鸣器和警报器是我们的主要产品，并拥有众多的获得专利的声音解决方案。我们不仅提供数百种标准物品，还提供我们专业团队提供的定制服务。从物理外壳设计，SPL（声压级）增强，峰值频率调整到防水或耐低/高温的特定要求，Kingstate 将是您最佳声音解决方案的合作伙伴。

原厂动态发布时间 : 2021-05-18

志丰电子提供多种麦克风产品，可适用于汽车电子、医疗电子等多领域

本文介绍了志丰电子的麦克风产品情况，在汽车电子、医疗电子、5G＆智慧生活、智能家居＆安防等市场应用，应用市场包括穿戴产品、娱乐影音、汽车电子、家电制品、5G及物联网、消费性电子产品、智能家居与安控、笔电及平板计算机、各类工商业设备。

原厂动态发布时间 : 2021-12-14

志丰电子（Kingstate）压电蜂鸣器/电磁蜂鸣器/喇叭（微型扬声器）/受话器（动态接收器）/ECM麦克风选型指南

目录- Piezo Buzzer Magnetic Buzzer Micro Speaker Dynamic Receiver ECM

型号- KECG2740PBL-A,KPEG262-24V,KPEG350,KSSGL4B12-S,KPEG114,KEIG4537TFL-N,KPEG260H,KPEG116,KPEG272H,KPEG351,KPEG110,KPEG352,KPEG232,KPEG353,KPEG112,KDSG48008-BOXW,KEKG2247TB-A,KSSGH5B43,KDSG2014008C-10,KPEG238,KDSG48008-BOXP,KPEG132H-40,KMM4030102663DM8,KEKG2247TBL-A,KPEG651AN,KSMG45008-05,KEBG6542PF-D,KPEG220,KPEG222,KPEG106,KPEG228,KSTG931AP,KXG1203CLF,KECG2738WBJ-52L,KPEG153H,KPEG250H,KECH2732TBL-SN70,KDSG4028008LS-10,KDRG14032-3,KSSG95B30,KMTG1612,KPEG218,KECG2738PB-A,KXG0905CW2,KDMG40008,KPEG813SAN,KPEG501-D,KDSG160908C-10,KPEG203,KEAG4530WB-80L,KXG1606C,KPEG200,KPEG209,KPSG100,KSSGH5B43-HQ,KTG1205CL,KPEG207,KPEG208,KCG0603-K,KDMG66008C-50,KPEG1600,KDSG3525008R-BOX,KEIG4537TFL-G02,KECG2742WBL-25L,KDMG10008CL-03,KEAG1500L,KDSG27008C-20,KPEG850SAN,KMPG666-4,KMM4030102664DN9,KPEG132H-30P,KPEG411AC,KMM4030102664DN8,KSSG1206,KMTG1603-2,KSQG703BP,KEAG4534TBL-SN,KDSG30064,KPEG660,KSSGK4B16-A,KPEG420,KPEM268B32PAD2,KDSG37045-020-C2,KPEM268B32PAD1,KSSG33J12-HDB,KXG2512-HB,KPEG422AC,KMM4030102664DM7,KPEGA1600NCW200A,KCG1206-GS,KPEG1501,KDSG17008R-08W1,KPEG202T-1,KPEG655,KPEG270H,KPEG650,KDSG15008X-05W5,KPEG657,KDSG302008X-10WF,KPEG850SCP,TRAG50004-50W,KTG1205HD,KECG2738CBL-A,KPEG106-HS,KXG1212C-H1,KPEG653SAN,KPEG522,KMM3729113865AMM,KDSG25004C-20,KXG2512-A,KPEG848S,KTG1203CL,KDSG37045-020-A3,KSTG911AP,KPEG851SAN,KEFG1542TB-A,KSSG2308,KDSG36050-10E,TRFG7070004-100,KDMG4020008C-20A,KEEG1540PBL-A,KSSGJ4D20-H,KECG2726WFL-G24T,KPEG751,KPEG753,KDSG18008X-10WC,KPEG851SH,KECG1042WBL-G02,KPEG655SA,KPEG750,KPEG755,KXG1205C-HB,KEEG1525WBL-G2A,KDSG37045-020-B,KSSGI4B20,KPEG500,KEEG1340WBL-GN1,KMTG0902,KPEG980,KEEG1525WBL-G02C,KPEG651SAN,KCG0601,KPEG850SD,KPEG502,KPEG503,KPEG232H,KPEG353H,KDMG77008C-30,KSSG74B20,KPEG181-W1,KECG1542PBL-A,KPEG138B40PAD1,KXG0905C-A,KECG1542CBJ-G14,KSTG931APL-H2,KDRG30032A,KSSG74B16,KSSG1708,KTG1212CL,KEIG6535TB-KM1,KXG0912C,KPEG138B40PAD4,KPEG960,KEIG6334TB-KN,KPEG222H,KPEG355H,KEIG4537TFX-SN72,KBIG3531F08030Z,TRAG52008V-10,KEKG2747TBX-KM,KDSG23008,KPEG853SH,KPEG830,KPEG831,KPEG657SA,KPEG833,KDSG40004C-50,KEKG2244PBL-A,KAAG15008C,KSSG94B16,KEAG6538TF-K,KTG1205C,KPEG355H-24V,KPEG827,KEEG1542WB-12LK,KSSG73B16,KPEG276H,KEEG1542WBL-GKB,KPEG242-5V,KXG1203C-H,KPEG139-1,KDMG26008,KDMG36008-10B,KMTG1303-1,KEEG1538TBL-A,KSSG74B17-3,KDRG057016A,KPEG133M,KPEG1600L,KDSG36008P-03,KMTG1102-A1,KPEG350H-54V,KPEG650SAN,KBIG3532F09030AZ,KSSG1508,KDRG57032,KSSGJ4D20,KEAG4542TBL-KA1,KPEG350H,KECG2724WBL-G20,KECG2740WFJ-18L,KDSG302008R-BOX1,KECG3638TFL-A,KECG2034WBL-G01B,KPEG651SA,KPEG653A,KPEG169P32,KSSG1201-16,KPEG810SAND,KTG1205,KECG1338TB-A1,KXG1212C,KPEG650SA,KMM3526092665EN3,KMIG1240H-TR,KEFG1544TBL-C,KPEG655A,KECG2224WFL-G01R,KPEG207H,KPEM268F,KXG0903C1,KECG2738WBL-G43,KPEG132B30PAD1,KSTG931RP-HZ,KXG1201C,KPEG750P,KPEG1500NC,KDSG1511006Q-09T,TRFG102102004-120,KPEG218H,KDSG50025HS,KSSG73B16K,KDMG36008-10BW14,KPEG653SA,KECG2730TB-AS,KDSG28008C-20,KERG2748TBX-KM,KEIG4524WBL-3KL,KXG2505,TRFG50016C-30A,KDMG40008X-BOX,KXG1203C,KXG1203A,KCVG084B16-A,KSSGJ4B16-S,KPEG200H,KSSG33J12-3,TRFG7040008C-50,KDSG20008R-10WA,TRFG8888004-100,KXG1201,KECG2738WBL-GWT,KEFG1541WB-G07,KEEG1538WB-100LE,KPEG850SH,KEEG1538WB-100LB,KECG3640PF-A,KECG3640WF-31L,KTG0905CL,KPEG651A,KPEG750PA,KEIG4536TFL-NH,KEEG1540CBL-A,KXG1212,KEEG1525WBX-G11,KDMG28008-05,KXG1205C,TRFG105105004-150,KPEG132H-30WA,KPEG242-24V,KPEG242-12V,KDRG40016D,KDRG40016C,KDMG151508-05,KXG1205,KEEG1542TBL-KA1,KMTG1261,KEKG2247WB-15L,KAAG13008-07C,KPEG620AN,KPEG228-24V,KEFG1544WBL-G01,KPEG138A40,KXG1612,KMTG1003-F,KPEG182,KPEG183,KDMG50004C-30,KPEG811SAN,TRAG58004V-50,KPEG181,KETG1544TB-RF-CL,KPEG810SANDR,KPEG153H-2K,KPEG853S,KEEG1342SBL-C,KMTG1203,KEIG4537WBL-25L,KPEG171,KDMG30008X-BOX1,KPEG621SAN,KDMG30008X-BOX2,KPEG1600NCB,KECG3640TF-A,KPEG810SAN,KAAG20008C-08,KMM3729114258ABN,KPEG161,KPEG162,KPEG163,KPEG280,KPEG848SD,KPEG169,KECG2742TBL-KA1,KPEG165,KSSGD3B16,KDSG20008,KSTG951AP,KEIG4537WFL-3KL,KSSG13J12-N,KPEG400AC,KDMG20008,KPNG1020,KPEG270,KPEG150,KPEG623SAN,KPEG272,KDMG40004-10WA,KPEG137A30,KPEG278,KPEG159,KPEG850S,KPEG276,KDMG92008C-20,TRFG7979004-100,KECG2237TBL-SN65,KSSGI3J12-A,KDSG23050P-06B,KCG1202,KECG2724TBL-RF,KXG1205-LH,KPEG260,KDMG40016-20W,KPEG141,KPEG262,KPEG146,KPEG267,KPEG142,KPEG263,KEAG6535TB-KM,KPEG853SAN,KDRG09016A-4,KPEG208H,KTG0912CL,TRFG8282004-100,KDSG29008,KPEG250,KPEG130,KPEG251,KPEG135,KPEG755S,KTG1212,KPEG621AN,KPEG755P,KPEG132,KPEG253,KPEG134,KECG2738TBJ-A,KPEG611SAN,KXG1612C,KDMG15008-05,KEKG2741WBL-G01S,KPEG158-KS,KEEG1540TBJ-A,KDSG30008,KSSGJ4B20-NEW,KSSG3108,KDMG36008-10DWA1,TRFG5353004-30,KDMG10008C-03,KPEG657S,KPEG126,KPEG006,KPEG120,KPEG121,KPEG851S,KPEG122,KPEG243,KPEG123,KPEG244,KEEG1540WBL-G04N,KXG1606,KXG1601,KDMG16008-03,KPEG1600NC

选型指南 - 志丰电子 - 2021/4/27 PDF 英文下载

志丰电子（Kingstate）成立于1977年，是为台湾第一家取得ISO认证的专业声学公司，专注于蜂鸣器、警报器、喇叭（多媒体喇叭，音箱喇叭，耳机喇叭）、电容式麦克风、MEMS麦克风模组等电声产品，通过车规及医疗认证。

蜂鸣器喇叭麦克风扬声器

授权代理商 - 世强先进（深圳）科技股份有限公司线上商城技术资料

展开

LOW-POWER MULTIMODE DIGITAL BOTTOM PORT SISONIC™ MICROPHONE

数据手册 - KNOWLES - Rev B - 4/3/2024 PDF 英文下载

新增喇叭、电容式麦克风、MEMS麦克风模组、蜂鸣器等声学组件产品供应商志丰电子

志丰电子（Kingstate）成立于1977年，是台湾第一家取得ISO认证的专业电声公司，多年来致力于研发制造声学组件和蓝牙耳机为主的产品，为各领域提供全方位的电声解决方案。成立以来，志丰电子已推出蜂鸣器、警报器、喇叭（多媒体喇叭，音箱喇叭，耳机喇叭）、电容式麦克风、MEMS麦克风模组等产品。其产品通过车规认证，并在1990年进入了汽车应用市场。志丰电子旗下麦克风产品灵敏度覆盖-25~-45dB，

公司动态发布时间 : 2021-04-26

志丰电子扬声器选型表

志丰电子提供以下技术参数的扬声器选型，工作温度=-40℃~110℃，额定输入=0.08W~15W.低失真，可定制化，快速定制样品

产品型号	品类	Terminal Shape	Dimensions (mm)	Rated Input (W)	Max. Input (W)	Impedance (Ω)	FO (Hz)	Sound Pressure Level (dB)	Frequency Range (Hz)	Operation Temp. (℃)	Material
KAAG13008-07C	扬声器	SMD Type	13.013.04.0mm	0.7W	1W	8±15%Ω@1.5KHz 1.0V	850±20%Hz@1.0V	87±3dB(0.7W/10cm), 70±3dB(1W/1m),@1.0K, 1.6K, 2.0K, 3.2KHz	Fo---20KHz	-30℃~+70℃	LCP (BLACK) PIN Plating Au 2-3u

选型表 - 志丰电子立即选型

High-Performance Digital MEMS Microphone KRM5403-011010 with a Dimensions of 4x3xt1.2mm and Low Current Consumption

The KRM5403-011010 is a high-performance digital MEMS microphone with dimensions of 4 mm x 3mm x 1.2 mm, offering improved size and performance over the existing KRM5403-010010 model. Features include low power consumption (0.46mA typical, half of the previous model), high SNR, flat low-frequency characteristics, and low distortion.

产品发布时间 : 2024-09-27

志丰电子压电蜂鸣器选型表

志丰电子提供以下技术参数的压电蜂鸣器选型，工作温度=-40℃~125℃，额定电压范围=0.75KHz~6000KHz.高音压、防水防尘IP68、多频多音色、耐高低温.

产品型号	品类	Title	Dimensions (mm)	Rated Voltage/Operating Voltage Range	Rated Frequency/Frequency Range(Hz)	Electrostatic Capacity(pF)	Operation Temp.(℃)	Storage Temp.(℃)	Material
KBIG3532F09030AZ	压电蜂鸣器	Piezo Element	ψ34.7*0.57mm	Max.40Vpp	3,180±200Hz	19,000~40,000@1KHz/1V	-20~+70℃	-30~+80℃	Stainless