Application of Equipment Heat Dissipation and Thermally Conductive Gel

时间： 2023-04-26 来源：SHEEN News

技术问答

选型帮助

研发客服

商务客服

Some people think that electronic devices will generate heat when they are used, so it is ok to let them not generate heat. However, heat generation when electronic devices are running is inevitable, because in reality the conversion of energy will be accompanied by loss. This part of the loss A large part of the energy is dissipated in the form of heat, so it is not feasible to eliminate the phenomenon of heat production.

Air is also a poor conductor of heat, and the heat transfer rate in the air is slow, so a radiator is needed. Install the radiator on the surface of the heat source of the equipment, and conduct the excess heat from the heat source into the radiator through surface-to-surface contact, thereby reducing the temperature of the heat source. However, there is a gap between the radiator and the heat source, and the heat will be affected by the air during heat conduction. The rate of action is reduced, so a thermal interface material is used.

The thermally conductive interface material can effectively fill the gap between the heat sink and the heat source, remove the air in the gap, and reduce the contact thermal resistance between the interfaces, thereby improving the heat dissipation of the device.

Thermally conductive gel is a member of thermally conductive interface materials. In addition to high thermal conductivity and low interface thermal resistance, the thermally conductive gel itself is a thick and semi-flowing paste. The gap can be quickly filled on the plane, and the thermal conductive gel also has many advantages, such as being applicable to a fully automated production process, convenient storage management, and so on.

发送到邮箱 |
+1 赞 0
收藏
评论 0
| 转发至：

本文由上山打老虎转载自SHEEN News，原文标题为:Application of equipment heat dissipation and thermal conductive gel，本站所有转载文章系出于传递更多信息之目的，且明确注明来源，不希望被转载的媒体或个人可与我们联系，我们将立即进行删除处理。

全部评论（0）

暂无评论

Thermally Conductive Materials with Ultra-high Thermal Conductivity

The thermally conductive material is a general term for materials that are coated between the heating device and the cooling device of the equipment and reduce the contact thermal resistance between the two.

技术探讨发布时间 : 2023-04-25

Will the Silicon-free Thermal Pad Produce Oil?

There are many kinds of thermal conductive materials, such as thermally conductive silica gel, silicon-free thermal conductive film, thermally conductive phase change film, thermally conductive gel, thermally conductive paste, carbon fiber thermally conductive gasket, thermally conductive insulating film, etc.

技术探讨发布时间 : 2023-11-29

High Thermal Conductivity Interface Material Helps Solve the Heat Dissipation Problem of Automotive Wireless Chargers

Automotive Wireless Chargers generate heat during charging. If the heat is not dissipated in time, the temperature on the surface of the wireless charger will be too high, and the temperature will be transmitted to the electronic equipment that is in direct contact with it, causing the temperature of the electronic equipment to be too high and affecting the service life of the battery of the electronic equipment.

技术探讨发布时间 : 2023-12-05

The Three Factors that Affect the Performance of the Thermal Silicone Pad During Use

Thermal silicone pad is one of the more commonly used traditional thermal conductive materials. It is a kind of soft silicone as the base material and is made of thermally conductive, temperature-resistant, and insulating materials in a certain proportion.

设计经验发布时间 : 2023-09-29

Why Does Thermal Resistance Affect the Thermal Conductivity of Thermal Silicone Pad?

Thermal silicone pad is a kind of gap-filling thermal pad made of silicone resin as the base material and added with temperature-resistant and thermally conductive materials. It has the characteristics of high thermal conductivity, low thermal resistance, insulation, compression, etc.

技术探讨发布时间 : 2023-09-28

Introduction of Thermal Gel and Its Application

The Thermal Gel series is a two-component preformed thermal grease product that meets the requirements of low pressure. In this article Sheen will introduce thermal gel and its application.

技术探讨发布时间 : 2023-11-08

A Brief Description of Thermally Conductive Materials - Thermally Conductive Gel

Thermally conductive gel is one of many gap-filling materials for thermally conductive materials. It can fully fill the gap between the contact interfaces and remove the air in the gap, thereby reducing the interface contact thermal resistance, so that heat can be quickly transferred to the radiator.

原厂动态发布时间 : 2023-05-02

Heat Dissipation Application of Thermal Materials in Outdoor Communication Cabinets

By filling the gap between the heat dissipation device and the heat source, Thermally conductive materials air between the interfaces is eliminated. This reduces the contact thermal resistance between the two, thereby improving the heat dissipation effect of the cabinet.

原厂动态发布时间 : 2023-06-19

What is the Significance of Reducing Thermal Resistance?

Thermally conductive material is a thermally conductive interface material that can effectively reduce contact thermal resistance, improve heat transfer efficiency, and thereby improve thermal conductivity.

技术探讨发布时间 : 2023-09-30

Why Use Thermally Conductive Materials?

The purpose of using a thermal interface material is to fill the gap between the two and remove the air in the gap, thereby reducing the heat dissipation of the heating device and the cooling device. Indirect contact thermal resistance, thereby increasing the rate of heat transfer.

技术探讨发布时间 : 2023-05-01

The Role of Thermal Gel and the Heat Dissipation Application of PCB Board

The thermal gel has a great advantage in the heat dissipation of PCB boards. Unlike thermal pads, it needs to be cut according to the area to be attached to the plane. It is inconvenient to mount or store, but thermally conductive gel can be ordered according to the area.

技术探讨发布时间 : 2023-06-18

Why Use Thermal Grease?

Thermal grease has high thermal conductivity and low interface thermal resistance. When using it, simply apply a thin layer of thermally conductive silicone grease, and then install the heat dissipation device, which can quickly remove the air in the gap and reduce the interface thermal resistance.

技术探讨发布时间 : 2023-06-16