Application of Equipment Heat Dissipation and Thermally Conductive Gel
Some people think that electronic devices will generate heat when they are used, so it is ok to let them not generate heat. However, heat generation when electronic devices are running is inevitable, because in reality the conversion of energy will be accompanied by loss. This part of the loss A large part of the energy is dissipated in the form of heat, so it is not feasible to eliminate the phenomenon of heat production.
Air is also a poor conductor of heat, and the heat transfer rate in the air is slow, so a radiator is needed. Install the radiator on the surface of the heat source of the equipment, and conduct the excess heat from the heat source into the radiator through surface-to-surface contact, thereby reducing the temperature of the heat source. However, there is a gap between the radiator and the heat source, and the heat will be affected by the air during heat conduction. The rate of action is reduced, so a thermal interface material is used.
The thermally conductive interface material can effectively fill the gap between the heat sink and the heat source, remove the air in the gap, and reduce the contact thermal resistance between the interfaces, thereby improving the heat dissipation of the device.
Thermally conductive gel is a member of thermally conductive interface materials. In addition to high thermal conductivity and low interface thermal resistance, the thermally conductive gel itself is a thick and semi-flowing paste. The gap can be quickly filled on the plane, and the thermal conductive gel also has many advantages, such as being applicable to a fully automated production process, convenient storage management, and so on.
- |
- +1 赞 0
- 收藏
- 评论 0
本文由上山打老虎转载自SHEEN News，原文标题为:Application of equipment heat dissipation and thermal conductive gel，本站所有转载文章系出于传递更多信息之目的，且明确注明来源，不希望被转载的媒体或个人可与我们联系，我们将立即进行删除处理。
相关推荐
Thermally Conductive Materials with Ultra-high Thermal Conductivity
The thermally conductive material is a general term for materials that are coated between the heating device and the cooling device of the equipment and reduce the contact thermal resistance between the two.
Will the Silicon-free Thermal Pad Produce Oil?
There are many kinds of thermal conductive materials, such as thermally conductive silica gel, silicon-free thermal conductive film, thermally conductive phase change film, thermally conductive gel, thermally conductive paste, carbon fiber thermally conductive gasket, thermally conductive insulating film, etc.
High Thermal Conductivity Interface Material Helps Solve the Heat Dissipation Problem of Automotive Wireless Chargers
Automotive Wireless Chargers generate heat during charging. If the heat is not dissipated in time, the temperature on the surface of the wireless charger will be too high, and the temperature will be transmitted to the electronic equipment that is in direct contact with it, causing the temperature of the electronic equipment to be too high and affecting the service life of the battery of the electronic equipment.
Why Does Thermal Resistance Affect the Thermal Conductivity of Thermal Silicone Pad?
Thermal silicone pad is a kind of gap-filling thermal pad made of silicone resin as the base material and added with temperature-resistant and thermally conductive materials. It has the characteristics of high thermal conductivity, low thermal resistance, insulation, compression, etc.
A Brief Description of Thermally Conductive Materials - Thermally Conductive Gel
Thermally conductive gel is one of many gap-filling materials for thermally conductive materials. It can fully fill the gap between the contact interfaces and remove the air in the gap, thereby reducing the interface contact thermal resistance, so that heat can be quickly transferred to the radiator.
Introduction of Thermal Gel and Its Application
The Thermal Gel series is a two-component preformed thermal grease product that meets the requirements of low pressure. In this article Sheen will introduce thermal gel and its application.
The Role of Thermal Gel and the Heat Dissipation Application of PCB Board
The thermal gel has a great advantage in the heat dissipation of PCB boards. Unlike thermal pads, it needs to be cut according to the area to be attached to the plane. It is inconvenient to mount or store, but thermally conductive gel can be ordered according to the area.
The Three Factors that Affect the Performance of the Thermal Silicone Pad During Use
Thermal silicone pad is one of the more commonly used traditional thermal conductive materials. It is a kind of soft silicone as the base material and is made of thermally conductive, temperature-resistant, and insulating materials in a certain proportion.
What is the Significance of Reducing Thermal Resistance?
Thermally conductive material is a thermally conductive interface material that can effectively reduce contact thermal resistance, improve heat transfer efficiency, and thereby improve thermal conductivity.
Heat Dissipation Application of Thermal Materials in Outdoor Communication Cabinets
By filling the gap between the heat dissipation device and the heat source, Thermally conductive materials air between the interfaces is eliminated. This reduces the contact thermal resistance between the two, thereby improving the heat dissipation effect of the cabinet.
Why Use Thermally Conductive Materials?
The purpose of using a thermal interface material is to fill the gap between the two and remove the air in the gap, thereby reducing the heat dissipation of the heating device and the cooling device. Indirect contact thermal resistance, thereby increasing the rate of heat transfer.
Why Use Thermal Grease?
Thermal grease has high thermal conductivity and low interface thermal resistance. When using it, simply apply a thin layer of thermally conductive silicone grease, and then install the heat dissipation device, which can quickly remove the air in the gap and reduce the interface thermal resistance.
深耕消费/汽车行业15年！导热材料厂商盛恩授权世强硬创代理
盛恩（SHEEN）将借助世强硬创平台为用户提供盛恩（SHEEN）导热硅胶垫片、无硅导热垫片、碳纤维导热垫片、导热绝缘片、导热凝胶、导热膏硅脂、导热胶粘接剂、导热相变片、导热灌封硅胶、导热双面胶带等全线产品。
UU9.8 Common Mode Inductor: Safeguarding Electronic Devices
In the world of electronic devices, the purity and stability of signals are as crucial as a lifeline. The UU9.8 common mode inductor stands as a loyal guardian of this lifeline.
电子商城
授权代理品牌：集成电路
授权代理品牌：分立元件
授权代理品牌：接插件及结构件
授权代理品牌：部件、组件及配件
授权代理品牌：电源及模块
授权代理品牌：电子材料
授权代理品牌：仪器仪表及测试配组件
授权代理品牌：电工工具及材料
授权代理品牌：机械电子元件
授权代理品牌：加工与定制
我要提问
登录 | 立即注册
提交评论