Types of Fiber Optic Attenuators
A fiber optic attenuator is a passive device used to reduce the power level of an optical signal in free space or in an optical fiber. They have fixed types, step-variable and continuous-variable types.
Although Fiber Optic Attenuators are commonly used in SM (single mode) links, since this is where stronger lasers are used for distance transmission, multimode attenuators are also available.
The most common version of attenuators is male-to-female. These plug-type attenuators are simply installed on one end of a fiber optic cable, allowing the fiber optic cable to be plugged into a receiving device or panel.
There are also female-to-female (male) attenuators, typically used to install in a patch panel or to connect two fiber optic cables together. Variable attenuators are more expensive but useful for testing and can be adjusted from 1dB to 30dB.
dB rating is a measure of signal strength because sometimes you can confuse it with others.
Ⅰ. Two common applications of fiber optic attenuators
The first case is in a power level test. To test power level margins in fiber optic communication systems, optical attenuators are used to temporarily add a calibrated amount of signal loss.
In the second case, optical attenuators are permanently installed in the fiber optic communication link to properly match the optical signal levels of the transmitter and receiver.
Ⅱ. What are the types of optical attenuators?
There are four different types of attenuators, which can take many different forms and are usually classified as either fixed or variable attenuators. Also, based on the types of connectors, they can be classified into LC, SC, ST, FC, MU, E2000 type, etc.
1. Fixed attenuators: Fixed optical attenuator used in fiber optic systems may use various principles to function. Preferred attenuators use doped fibers or misaligned splices, as both are reliable and inexpensive.
In-line attenuators are included with jumpers. Another built-in attenuator is a small male-female connector that can be added to other cables.
Non-preferred attenuators typically use gap loss or reflection principles. Such devices can be sensitive to mode distribution, wavelength, pollution, vibration, temperature, and power bursts.
2. Loopback Attenuators: Loopback fiber optic attenuators are designed for testing, engineering, and burn-in stages of circuit boards or other equipment. It is suitable for SC/UPC, SC/APC, LC/UPC, LC/APC, MTRJ, and MPO for single-mode applications.
- |
- +1 赞 0
- 收藏
- 评论 0
本文由出山转载自T&S Blogs，原文标题为:Types of Fiber Optic Attenuators，本站所有转载文章系出于传递更多信息之目的，且明确注明来源，不希望被转载的媒体或个人可与我们联系，我们将立即进行删除处理。
相关推荐
The Working Principle and Performance Index of Fiber Optic Attenuator
Fiber attenuators are passive devices used to reduce the power of a signal to a certain level. It is widely used in the detection and debugging of optical fiber communication systems, equipment, and instruments in the process of research, development, and production.
What Are the Common Fiber Optic Attenuators?
A fiber optic attenuator is an optical device that can reduce the energy of an optical signal. Through the attenuation of input optical power, it can avoid the distortion of the optical receiver due to too strong input optical power.
Why Fiber Optic Attenuators Are Used in Fiber Optic Cable Transmission Lines?
The intensity of the optical signal received by the optical receiving device needs to be within a certain range, and the optical power cannot be too strong or too weak. Otherwise, the device‘s life will be shortened or it will not work properly. The optical fiber attenuator is an optical passive device that can act on it to reduce the energy of the optical signal and attenuate the input optical power, so as to avoid the distortion of the optical receiver due to the super strong input optical power.
What Are the Functions of the Fiber Optic Attenuators?
The fiber optic attenuator is an optical passive device that can act on it to reduce the energy of the optical signal and attenuate the input optical power, so as to avoid the distortion of the optical receiver due to the super-strong input optical power.
What Are the Classifications of Optical Fiber Attenuators?
The attenuation range of the fiber optic attenuator is 0 to 65dB. Among them, the attenuation power of the fixed optical attenuators currently on the market is between 1 and 30dB. Fixed optical attenuator is a type of optical fiber attenuator, which fixes the attenuation power at an attenuation value.
SC型光固定衰减器
描述- 本资料详细介绍了两种类型的光纤固定衰减器：SC型和MU型。资料中列出了不同衰减量、模式、回波损耗、最大输入功率和端接类型等参数。同时，还提供了不同型号的衰减器尺寸、端接方式等信息，并指出如需特殊衰减量，可联系供应商。
型号- LGA-SC03KCA,LGA-SHP325S+R,LGA-SHP320S+R,LGA-SG01KCA,LGA-S610KCA,LGA-SG20KCA,LGA-SHP310S+R,LGA-S615KCA,LGA-SHP305S+R,LGA-SHP330S+R,LGA-SHP303S+R,LGA-SHP315S+R,LGA-S605KCA
HSC-AT11系列SC型固定衰减器（单模）
描述- 该资料介绍了HSC-AT11系列单模固定衰减器，适用于光纤通信网络中的功率调整。产品具备高输入功率（最大250mW）、与简化型SC插头/插座兼容、与水平双工适配器相邻连接等特点。资料中详细描述了产品的特性、规格、应用领域以及不同衰减值的型号和参数。
型号- 820-9518-8,HSC-AT11CS-A02,HSC-AT11U-A09,HSC-AT11CS-A03,HSC-AT11U-A08,HSC-AT11U-A07,HSC-AT11CS-A01,820-6018-9,820-9514-7,820-9017-2,HSC-AT11U-A02,HSC-AT11U-A01,HSC-AT11U-A00,820-9013-1,HSC-AT11U-A06,HSC-AT11U-A05,HSC-AT11U-A04,HSC-AT11U-A03,HSC-AT11CS-A08,HSC-AT11CS-A09,HSC-AT11CS-A06,HSC-AT11CS-A07,HSC-AT11CS-A04,HSC-AT11CS-A05,820-9009-4,HSC-AT11CS-A13,HSC-AT11CS-A14,HSC-AT11CS-A11,HSC-AT11CS-A12,HSC-AT11CS-A10,820-6003-1,820-9005-3,820-9001-2,820-6013-5,820-9510-6,HSC-AT11CS-A15,HSC-AT11CS-A16,820-6017-6,HSC-AT11K-A25,820-9012-9,820-9016-0,HSC-AT11K-A20,HSC-AT11,820-6020-0,820-9507-1,820-9503-0,820-6004-4,820-9008-1,820-6009-8,820-9508-4,HSC-AT11K-A30,820-9004-0,820-6012-2,820-9511-9,820-9519-0,820-6016-3,820-9515-0,HSC-AT11K-A07,HSC-AT11K-A08,HSC-AT11K-A05,820-9015-7,HSC-AT11K-A06,HSC-AT11K-A03,HSC-AT11K-A04,HSC-AT11K-A01,HSC-AT11K-A02,HSC-AT11K-A00,820-9011-6,820-9504-3,820-9500-2,820-6005-7,820-6008-5,HSC-AT11K-A16,820-9003-8,820-9509-7,820-6001-6,HSC-AT11K-A14,HSC-AT11K-A15,820-9505-6,HSC-AT11K-A12,HSC-AT11K-A13,HSC-AT11K-A10,HSC-AT11K-A11,820-6011-0,820-6015-0,820-9516-2,820-6019-1,820-9512-1,HSC-AT11K-A09,820-9019-8,HSC-AT11CS-A25,820-9018-5,820-9517-5,HSC-AT11CS-A20,820-9014-4,820-9010-3,HSC-AT11U-A25,HSC-AT11U-A30,820-9501-5,820-6007-2,820-9007-9,820-6002-9,820-9506-9,820-9006-6,820-9502-8,820-6006-0,820-9002-5,HSC-AT11CS-A30,HSC-AT11U-A13,HSC-AT11U-A12,HSC-AT11U-A11,HSC-AT11U-A10,HSC-AT11U-A16,HSC-AT11U-A15,HSC-AT11U-A14,HSC-AT11U-A20,820-9513-4,820-6010-7,820-6014-8
太辰光（T&S）光纤通信产品选型指南
目录- 公司简介 陶瓷插芯 常规光纤连接器 IEC分级跳线 MPO/MTP多芯连接器 机箱和模块盒 标准测试线 保偏光纤连接器 光收发组件 高速光模块/AOC线缆连接方案 光纤回路器/衰减器 连接头/适配器/终端器 熔融拉锥耦合器和PLC光分路器 波分复用器 光模块及有源光缆 高速线缆 光纤光栅
型号- TSSLS-NCNEE3C,400G QSFP-DD TO 4X100G QSFP56 AOC,200G QSFP56 SR4,400G QSFP-DD TO 8X50G SFP56 DAC,TSSLS-NXXCE3T,TSQM4-NAAJB1C,TSQS-PC40G-XXM,TSD4Q-85M-XXXC,TS-RD1,TS-RD1-1U,TSD8S-85M-XXXC,TSQSQ-85G-XXXC,TSQ45-85G-XXXC,TSQM4-NAAJB1T,TS-FD2,TSSLS-NXXCE3C,TS-FD1-1U,TS-FD1,40G QSFP+TO 4X10G SFP+DAC,PD2-6M,TSSLS-NCNEH8C,40G QSFP+ TO 4X10G SFP+ AOC,TSQS-PC56G-XXM,FEN-LH-SMA,TS-FD2 SERIES,56G QSFP+DAC,40G QSFP+ ER4,TSQD-PC4HG-XXM,200G QSFP56 AOC,10G SFP+ ZR,FEN-LH-LC,100G QSFP28 PSM4,TSSLS-CXXEE3C,25G SFP28 SR,TSSLS-NAACBIT,TSSLS-NAAEAIT,TSQDQ-4PC1HG-XXM,100G QSFP28 AOC,TSSLS-NAACB1C,TSSLS-NAAEA1C,FEN-LH-SDL,10G SFP+ DWDM,MD2-1M24L,TSQL4-E11GH7C,TSQSS-PC2HG-XXM,TSQL4-F22JH4C,FES-LC-PA,25G SFP28 DAC,25G SFP28 CWDM,400G QSFP-DD DAC,400G QSFP-DD DR4,TSSLS-NCNCE3C,400G QSFP-DD TO 2X200G QSFP56 DAC,MD1-3M24L,TSSP-PC25G-XXM,TSD2Q-85L-XXXC,200G QSFP56 TO 4X50G SFP56 AOC,56G QSFP+ AOC,TSSP-PC56G-XXM,TSQS-PC2HG-XXM,100G QSFP28 SR4,10G SFP+ LR,TSQM4-NCNJC3C,TSQSS-PC1HG-XXM,TS-RD1 SERIES,TSSSS-85H-XXXC,TSQDQ-2PC2HG-XXM,50G SFP56 AOC,40G QSFP+ DAC,TS-FD1 SERIES,TSQSQ-85H-XXXC,TSQM4-NAALAIC,FEN-SC-FUNNEL-1,PD2-24L,FEN-SC-FUNNEL-2,TSQM4-NAAGB1C,TSQM4-NAAGBIT,TSSSS-85E-XXXC,40G QSFP+ LR4,TSSLS-CXXCE3C,FES-SC-PA,TSQS-PC1HG-XXM,200G QSFP-DD TO 2X100G QSFP28 AOC,100G QSFP28 TO 2X50G QSFP28 AOC,TSSLS-DXXEE4C,10G SFP+ DAC,25G SFP28 BIDI,TSSLS-NCNEE3T,100G QSFP28 LR4,TSQ4S-85L-XXXC,TSQSQ-85L-XXXC,100G QSFP28 DAC,TSDM4-NCNMC3C,25G SFP28 ER,10G SFP+ AOC,10G SFP+ BIDI,400G QSFP-DD TO 8X50G SFP56 AOC,800G QSFP-DD AOC,TSQM4-NCNGC3C,TSDR8-NAAMATC,TS-FD2-2U,10G SFP+ CWDM,10G SFP+SR,FEN-LC-2,25G SFP28 DWDM,TSSSS-85C-XXXC,TSDSD-85N-XXXC,100G QSFP28 TO 4X25G SFP28 AOC,TSQDS-8PC50G-XXM,800G QSFP-DD SR8,10G SFP+ ER,200G QSFP56 DAC,100G SFP-DD AOC,TSSLS-DXXCK8C,TSQ2Q-85J-XXXC,TSSLS-NCNCE3T,TSQSQ-PC2HG-XXM,TSD2Q-85M-XXXC,FEN-LH-SC,TSSLS-NXXEE3T,200G QSFP56 FR4,40G QSFP+ AOC,50G SFP56 DAC,100G QSFP28 TO 4X25G SFP28 DAC,100G QSFP28 ER4,FEN-SC-1,TSDSD-85M-XXXC,400G QSFP-DD FR4,TSDL4-E11MD3C,100G QSFP28 CWDM4,TSSLS-NXXEE3C,25G SFP28 LR,40G QSFP+PSM4,TSQL4-F22JE3C,400G QSFP-DD TO 2X200G QSFP56 AOC,TSTST-85K-XXXC,400G QSFP-DD AOC,TSQSQ-85J-XXXC,TSQ4S-85J-XXXC,TSD85-85L-XXXC,TSQL4-E11JE3C,TSDR8-NAANA1C,TSSLS-NCNCKBC,200G QSFP56 TO 4X50G SFP56 DAC,TSQL4-E11LD3C,400G QSFP-DD TO 4X100G QSFP56 DAC,200G QSFP-DD TO 8X25G SFP28 AOC,TSSLS-NCNCH4C,MD1-2M6M,200G QSFP56 TO 2X100G QSFP56 DAC,25G SFP28 AOC,PD1-24L,TSQL4-E11GE3C,400G QSFP-DD SR8,40G QSFP+SR4,TSQSS-PC40G-XXM,TSSLS-DXXCH4C,TSSP-PC192-XXM
【产品】太辰光可定制长度的MPO/MTP Hydra电缆组件，具有插入损耗低、回波损耗高等特性
太辰光推出的MPO/MTP Hydra电缆组件是部署在即插即用盒式模块内的。它用于多光纤到单光纤的分离互连。这是一款有12个颜色0.9mm电缆的解决方案，这一组件的一端使用MPO/MTP连接器，另一端则是用通用连接器（如LC、SC、FC等）。
【产品】Bussmann系列 Class G - SC保险丝，具有100kA中断额定值
Bussmann的SC型保险丝为UL Class G 保险丝，提供快速熔断（1/2-6 A）和延时熔断（7-60 A）特性，以满足电路保护需求。SC保险丝在总长度上是尺寸剔除，因此有助于防止熔断过度。
Detailed Introduction of Fiber Jumper Interface Types PC, APC, UPC
In order to make the end faces of the two optical fibers better contact, the ferrule end faces of the fiber jumpers are usually ground into different structures. Common grinding methods are PC, APC, UPC. PC/APC/UPC represents the front face structure of the ceramic ferrule.
【元件】华丰史密斯互连推出新一代APC系列充电连接器助力移动机器人生产商打造更好的设计
基于充分的市场需求研究，华丰史密斯互连通过整合全球先进工艺技术，优化结构设计，开发的新一代AGV/AMR充电连接器APC系列兼具成本效益和持久耐用，相对市场上其他产品拥有更高的可靠性和安全性，更紧凑的尺寸，高使用寿命，高充电能力，适配车型广泛，可用于仓储物流等移动机器人以及工业自动化、储能换电等领域。
【产品】太辰光多芯光纤连接器系列通过100%光学性能测试，插入损耗低于0.3dB，回波损耗最小45dB
太辰光主要从事为各种光通信器件及其集成功能模块的研发、制造和销售，其推出的多芯光纤连接器，具有低插入损耗和高回波损耗的特征，100%光学性能测试以及良好的插芯端面几何参数控制，符合Telcordia IEC, TIA/EIA, GR326标准。
电子商城
授权代理品牌：集成电路
授权代理品牌：分立元件
授权代理品牌：接插件及结构件
授权代理品牌：部件、组件及配件
授权代理品牌：电源及模块
授权代理品牌：电子材料
授权代理品牌：仪器仪表及测试配组件
授权代理品牌：电工工具及材料
授权代理品牌：机械电子元件
授权代理品牌：加工与定制
我要提问
登录 | 立即注册
提交评论