What Are the Applications of PLC Splitter?
In the passive optical network, the optical splitter plays an important role. It realizes the sharing of a passive optical fiber network by multiple end users. PLC Splitters have good performance and are widely used in fiber optic networks.
Ⅰ. What is a PLC splitter?
PLC optical splitter, also known as the planar lightwave circuit splitter, is a passive device with multiple input ends and multiple outputs, which splits one or two input optical signals into two or multiple output optical signals. It is especially suitable for connecting central office equipment and terminal equipment in passive optical networks such as FTTX, EPON, GPON, and BPON to realize optical signal splitting. The advantages of fiber optic PLC splitter are as follows:
1. The light splitting is uniform and there are many branches, which can evenly distribute the optical signal to multiple end users, and the number of channels is up to 128;
2. The structure is compact and the volume is small, which can be installed without large space, and it is commonly seen in various transfer boxes;
3. The more branch channels there are, the more obvious the cost advantage there will be;
In short, the PLC splitter is a low-cost, high-stability and reliable solution with an optical splitting ratio of up to 1:128.
Ⅱ. The production process of the PLC splitter
The PLC optical splitter is produced based on planar optical waveguide technology. The PLC optical splitter is composed of a PLC splitter chip and multiple optical waveguide arrays (ie, input and output fiber arrays), and the fiber arrays are respectively coupled to both ends of the PLC splitter chip. That is to say, the two ends of the chip are respectively coupled to encapsulate the input end and the output end of the multi-channel optical fiber array. The function of branching is completed on the chip, and up to 128 branches can be realized on one chip.
Ⅲ. The classification of PLC splitter
PLC optical splitter can be classified into 1xN PLC optical splitter and 2xN PLC optical splitter, such as 1x4 PLC optical splitter, 1x8 PLC optical splitter, 1x16 PLC optical splitter, 2x32 PLC optical splitter, 2x64 PLC optical splitter, etc.
In addition, according to the different packaging types, PLC optical splitter is classified into bare fiber type PLC optical splitter, miniature steel tube type PLC optical splitter, ABS box type PLC optical splitter, tray-type PLC optical splitter, rack-type PLC optical splitter, LGX box optical splitter, and miniature plug-in PLC optical splitter, etc.
Ⅳ. The application of the PLC splitter
In passive optical networks, PLC splitters are usually installed between an Optical Line Terminal (OLT) and an Optical Network Unit (ONU) or Optical Network Terminal (ONT) near the end user. The input end of the PLC splitter is connected with the optical fiber link of the OLT in the central office (CO), and multiple optical signals are split and transmitted to the end users of the optical network.
The PLC optical splitter can realize optical signal splitting in two ways: centralized distribution and cascaded distribution. Centralized distribution means that the PLC optical splitter is centrally installed at a certain position between the optical line terminal (OLT) and the optical network unit (ONT), centrally performs optical splitting processing on the signal at the central office and then transmits it to each end user.
At this time, the central office often uses a 1x32 or 1x64 PLC optical splitter. Different from the centralized distribution, the PLC splitters in the cascade distribution are distributed more and scattered, and the structure is complex. In this structure, there is both primary and secondary splitting. Normally, a 1x4 PLC splitter (connected to the OLT port) is used for the first-level split, and a 1x8 PLC splitter (connected to an external terminal) is used for the second-level split.
- |
- +1 赞 0
- 收藏
- 评论 0
本文由出山转载自T&S Blogs，原文标题为:What Are the Applications of PLC Splitter?，本站所有转载文章系出于传递更多信息之目的，且明确注明来源，不希望被转载的媒体或个人可与我们联系，我们将立即进行删除处理。
相关推荐
Fiber Optical PLC Splitters in Different Communication Network Structures
According to the different network structures, the distribution methods of PLC splitters in the network are also different. Generally, there are two types of fiber optical PLC splitters: centralized distribution and cascade distribution.
PLC Optical Splitter vs FBT Optical Splitter: What‘s the Difference?
An optical splitter is a passive optical device that can split an input optical signal into multiple output optical signals, and is widely used in passive optical fiber networks. According to the different working principles, the optical splitter is divided into PLC splitter (planar waveguide optical splitter) and FBT optical splitter (fused taper optical splitter), then what do you know about these two optical splitters? What is the difference between them?
Three Features of ABS Cassette PLC Splitter
A PLC splitter is a quartz substrate-based planar waveguide optical power distribution device used to distribute optical signals from a central office (CO) to multiple end-user locations.
太辰光（T&S）光纤连接器选型指南
目录- 公司简介 Company profile 陶瓷插芯 Ceramic Ferrule 光纤连接器 Fiber Optic Cable Assembly 光纤元器件 Fiber Optic Components 波分复用器 WDM FBT光纤耦合器 FBT Coupler PLC分路器 PLC Splitter 光纤光栅 Fiber Bragg Grating 光纤模块、有源光缆及有源电缆 Fiber Optic Transceivers,AOC&DAC
型号- FOT-SC/APC,CG-XX/G652D/1.5M,D12F-SC/UPC/SM/∅0.9/L/L1M,SMC-P-1X2-163/15-10/90-FC/APC-1-G652D-∅3X60,FEN-SC-S4,FEN-SC-S5,MC-FC/APC-FC/UPC/SM/∅3/L,FEN-SC-S1,PM-FC/UPC(N)-FC/UPC(N)/1550/∅2/L-SA,FEN-SC-S2,FEN-SC-S3,ATIL-FC/APC/SM/05/NP/L,MPO/APC/12F-FC/UPC/SM/∅0.9-L/L1-RJ,PLC-1X8-A-09/L1-LC/UPC-09/L2-LC/UPC
太辰光（T&S）光纤通信产品选型指南
目录- 公司简介 陶瓷插芯 常规光纤连接器 IEC分级跳线 MPO/MTP多芯连接器 机箱和模块盒 标准测试线 保偏光纤连接器 光收发组件 高速光模块/AOC线缆连接方案 光纤回路器/衰减器 连接头/适配器/终端器 熔融拉锥耦合器和PLC光分路器 波分复用器 光模块及有源光缆 高速线缆 光纤光栅
型号- TSSLS-NCNEE3C,400G QSFP-DD TO 4X100G QSFP56 AOC,200G QSFP56 SR4,400G QSFP-DD TO 8X50G SFP56 DAC,TSSLS-NXXCE3T,TSQM4-NAAJB1C,TSQS-PC40G-XXM,TSD4Q-85M-XXXC,TS-RD1,TS-RD1-1U,TSD8S-85M-XXXC,TSQSQ-85G-XXXC,TSQ45-85G-XXXC,TSQM4-NAAJB1T,TS-FD2,TSSLS-NXXCE3C,TS-FD1-1U,TS-FD1,40G QSFP+TO 4X10G SFP+DAC,PD2-6M,TSSLS-NCNEH8C,40G QSFP+ TO 4X10G SFP+ AOC,TSQS-PC56G-XXM,FEN-LH-SMA,TS-FD2 SERIES,56G QSFP+DAC,40G QSFP+ ER4,TSQD-PC4HG-XXM,200G QSFP56 AOC,10G SFP+ ZR,FEN-LH-LC,100G QSFP28 PSM4,TSSLS-CXXEE3C,25G SFP28 SR,TSSLS-NAACBIT,TSSLS-NAAEAIT,TSQDQ-4PC1HG-XXM,100G QSFP28 AOC,TSSLS-NAACB1C,TSSLS-NAAEA1C,FEN-LH-SDL,10G SFP+ DWDM,MD2-1M24L,TSQL4-E11GH7C,TSQSS-PC2HG-XXM,TSQL4-F22JH4C,FES-LC-PA,25G SFP28 DAC,25G SFP28 CWDM,400G QSFP-DD DAC,400G QSFP-DD DR4,TSSLS-NCNCE3C,400G QSFP-DD TO 2X200G QSFP56 DAC,MD1-3M24L,TSSP-PC25G-XXM,TSD2Q-85L-XXXC,200G QSFP56 TO 4X50G SFP56 AOC,56G QSFP+ AOC,TSSP-PC56G-XXM,TSQS-PC2HG-XXM,100G QSFP28 SR4,10G SFP+ LR,TSQM4-NCNJC3C,TSQSS-PC1HG-XXM,TS-RD1 SERIES,TSSSS-85H-XXXC,TSQDQ-2PC2HG-XXM,50G SFP56 AOC,40G QSFP+ DAC,TS-FD1 SERIES,TSQSQ-85H-XXXC,TSQM4-NAALAIC,FEN-SC-FUNNEL-1,PD2-24L,FEN-SC-FUNNEL-2,TSQM4-NAAGB1C,TSQM4-NAAGBIT,TSSSS-85E-XXXC,40G QSFP+ LR4,TSSLS-CXXCE3C,FES-SC-PA,TSQS-PC1HG-XXM,200G QSFP-DD TO 2X100G QSFP28 AOC,100G QSFP28 TO 2X50G QSFP28 AOC,TSSLS-DXXEE4C,10G SFP+ DAC,25G SFP28 BIDI,TSSLS-NCNEE3T,100G QSFP28 LR4,TSQ4S-85L-XXXC,TSQSQ-85L-XXXC,100G QSFP28 DAC,TSDM4-NCNMC3C,25G SFP28 ER,10G SFP+ AOC,10G SFP+ BIDI,400G QSFP-DD TO 8X50G SFP56 AOC,800G QSFP-DD AOC,TSQM4-NCNGC3C,TSDR8-NAAMATC,TS-FD2-2U,10G SFP+ CWDM,10G SFP+SR,FEN-LC-2,25G SFP28 DWDM,TSSSS-85C-XXXC,TSDSD-85N-XXXC,100G QSFP28 TO 4X25G SFP28 AOC,TSQDS-8PC50G-XXM,800G QSFP-DD SR8,10G SFP+ ER,200G QSFP56 DAC,100G SFP-DD AOC,TSSLS-DXXCK8C,TSQ2Q-85J-XXXC,TSSLS-NCNCE3T,TSQSQ-PC2HG-XXM,TSD2Q-85M-XXXC,FEN-LH-SC,TSSLS-NXXEE3T,200G QSFP56 FR4,40G QSFP+ AOC,50G SFP56 DAC,100G QSFP28 TO 4X25G SFP28 DAC,100G QSFP28 ER4,FEN-SC-1,TSDSD-85M-XXXC,400G QSFP-DD FR4,TSDL4-E11MD3C,100G QSFP28 CWDM4,TSSLS-NXXEE3C,25G SFP28 LR,40G QSFP+PSM4,TSQL4-F22JE3C,400G QSFP-DD TO 2X200G QSFP56 AOC,TSTST-85K-XXXC,400G QSFP-DD AOC,TSQSQ-85J-XXXC,TSQ4S-85J-XXXC,TSD85-85L-XXXC,TSQL4-E11JE3C,TSDR8-NAANA1C,TSSLS-NCNCKBC,200G QSFP56 TO 4X50G SFP56 DAC,TSQL4-E11LD3C,400G QSFP-DD TO 4X100G QSFP56 DAC,200G QSFP-DD TO 8X25G SFP28 AOC,TSSLS-NCNCH4C,MD1-2M6M,200G QSFP56 TO 2X100G QSFP56 DAC,25G SFP28 AOC,PD1-24L,TSQL4-E11GE3C,400G QSFP-DD SR8,40G QSFP+SR4,TSQSS-PC40G-XXM,TSSLS-DXXCH4C,TSSP-PC192-XXM
UL 60950-1和CAN/CSA C22.2编号60950-1-07（20181214-E480181）合格证书
描述- 本证书确认，根据证书上所示标准的要求，UL对T\&S Communications Co., Ltd.生产的PLC Splitter, 1X2分路器进行了调查。该产品符合UL 60950-1和CAN/CSA C22.2 No. 60950-1-07信息技术设备安全标准。证书不提供使用UL认可组件标记的授权，仅带有UL认可组件标记的产品被视为UL认证并受UL后续服务覆盖。
PSP PLC分路器光纤盒
描述- 该资料介绍了PSP PLC Splitter Fiber Optic Enclosure，一款专为PLC分路器设计的1U光纤机柜。它具有丰富的输入输出端口，适用于GPON、LAN/SAN、CATV网络和FTTH等领域。产品采用可更换的前面板板，便于系统升级和维护。
型号- PSP-XA232LD00,PSP-XA116SC00,PSB SERIES,PSP-XA264LD00,PSP-XA264SD00,PSP-E1U,PSP-XA132SC00,PSP
PLC Optical Splitter Applied to FTTH
Optical splitter is the core of FTTH optical devices and plays an important role in PON. The optical splitter is usually installed between the OLT optical line terminal of the PON and the ONT optical network terminal. Through the optical splitter, multiple users can share a PON interface.
PSB PLC分路器光纤盒LGX基底面
描述- 该资料介绍了T&S公司提供的PSB PLC Splitter Fiber Optic Enclosure光纤管理解决方案。该方案包含多种终止点和进出配置，适配器板设计用于快速安装和方便访问分路器端口。产品采用冷轧钢和铝材质，具有黑色粉末涂层表面处理，适用于数据中心、企业网络、电信机柜和中央办公室等应用。
型号- PSB-E1U,PSB
电子商城
服务
可定制变压器电压最高4.5KV，高频30MHz；支持平面变压器、平板变压器、OBC变压器、DCDC变压器、PLC信号变压器、3D电源、电流变压器、反激变压器、直流直流变压器、车载充电器变压器、门极驱动变压器等产品定制。
最小起订量： 100000 提交需求>
可定制无线位移传感器量程范围10~600mm，采用了无线传输方式，可远程自动实时检（监）测位移量值，准确度级别(级)：0.2、0.5;内置模块：无线传输模块、供电模块;传输距离L(m)：可视距离1000 (Zigbee、 LORA)。
最小起订量： 1pcs 提交需求>
授权代理品牌：集成电路
授权代理品牌：分立元件
授权代理品牌：接插件及结构件
授权代理品牌：部件、组件及配件
授权代理品牌：电源及模块
授权代理品牌：电子材料
授权代理品牌：仪器仪表及测试配组件
授权代理品牌：电工工具及材料
授权代理品牌：机械电子元件
授权代理品牌：加工与定制
我要提问
登录 | 立即注册
提交评论