Dual-channel H-bridge Motor Driver Chip with Low RDS(ON) Resistance and 1.8A Drive Output
Zhongke Microelectronics' Dual-channel H-bridge Motor Driver Chip AT8822 provides an integrated
dual-channel motor drive solution for toys,
printers and other motor integration
applications. AT8822 has two H-bridge
drivers, which can drive two DC brushed
motors, or a bipolar stepper motor, or
solenoids and other inductive loads.
The power output stage of each H-bridge is composed of N-type power MOSFET, called H-bridge driver.
Internal shutdown function includes over current protection, short circuit protection, undervoltage lockout protection and overtemperature protection.
AT8822 provides an ETSSOP16package with exposed pad, which can effectively improve the heat dissipation performance, and is a lead-free product that meets environmental protection requirements.
Application
● Battery-Powered Toys
● POS Printers
● Video Security Cameras
● Office Automation Machines
● Gaming Machines
● Robotics
Features
●Dual-Channel H-bridge Motor Driver
●Drive Two DC Brushed Motors or One Stepper Motor
●Low RDS(ON) resistance, 0.45Ω(HS+LS)
●1.8A Drive Output
●Wide Voltage Supply, 5.5V-24V
●PWM control interface
●Over-temperature Shutdown Circuit
●Short Circuit Protection
●Undervoltage Lockout Protection
Package
Selection Guide
Typical Application Diagram
Pin Configuration
- |
- +1 赞 0
- 收藏
- 评论 0
本文由Batman转载自Zhongke Microelectronics,原文标题为:AT8822 Dual-channel H-bridge Motor Driver Chip,本站所有转载文章系出于传递更多信息之目的,且明确注明来源,不希望被转载的媒体或个人可与我们联系,我们将立即进行删除处理。
相关推荐
Dual-channel H-bridge Motor Driver Chip Offers Three Packages with RDS(ON) of Only 800mΩ
Zhongke Microelectronics‘s Dual-channel H-bridge Motor Driver Chip AT8833 provides an integrated dual-channel motor drive solution for toys, printers, and other motor integration applications. AT8833 has two H-bridge drivers, which can drive two DC brushed motors, a bipolar stepper motor, solenoids, and other inductive loads.
Dual-channel H-bridge Motor Driver Chip AT8813, 2.5A Drive Output
Zhongke Microelectronics‘ Dual-channel H-bridge Motor Driver Chip AT8813 provides an integrated motor drive solution for printers and other electromechanical integration applications. AT8813 has two H-bridge drivers with a maximum output of 32V±2.5A. It can drive two DC brushed motors, or a bipolar stepper motor, or solenoids and other inductive loads.
Dual-channel H-bridge Motor Driver Chip with RDS(ON) Resistance as Low as 610mΩ(HS+LS)
Hangzhou Zhongke Microelectronics‘ AT8812 provides an integrated motor driver solution for printers, scanners, and other electromechanical integration applications.
3A峰值驱动、5.5-20V电压电机驱动器,及BDS/GNSS多模卫星定位SOC芯片
描述- 杭州中科微电子有限公司成立于2004年。是由中科院微电子研究所与杭州政府共同出资成立的集成电路研发企业,国家高新技术企业。旗下的GPS/BDS定位产品支持北斗二号和北斗三号1~63 号全部卫星,拥有自主知识产权,可实现高性价比的国产替代。中科微的国产化电机驱动芯片通过核心客户审厂40多个型号兼容替代国外物料。
型号- ATD8812C,HR3988,ATGM332D-5NR32,HR8833,HR1124S,HR4995,AT8325,ATD8831T,ATD5999,ATD5833,AT9110H,AT8221D,AT8637S,AT8870,HR4982,ATD8842P,AT8637,AT8837,ATD5984,AT8236,AT8313,HR4985,ATD9900,ATD5989,ATD8811,AT8833,ATD5988,ATD8812,HR8825,HR4988,ATD8813,ATGM332D-5S31,AT6558R-5N32,ATD8842E,AT1124LP,AT8236N,ATGM332D-5P37,AT8222,ATD8202,ATD8840,ATD8841,AT8548,AT8549,AT8822,HR9110S,AT8221LP,ATGM331C-5T31,AT4931,ATD9800,ATGM332D-5N31
Dual-channel H-bridge Motor Driver Chip AT8841,2 Bits Current Control, Providing 4 Current Steps
Hangzhou Zhongke Electronics‘ AT88141 provides an integrated motor driver solution for printers and other electromechanical integration applications. AT8812C has two H-bridge drivers with a maximum output of 32V±2.5A.
Dual-channel H-bridge Motor Driver Chip with A Wide Supply Voltage of 8V~32V
Hangzhou Zhongke Microelectronics‘ Dual-channel H-bridge Motor Driver Chip AT8812C provides an integrated motor driver solution for printers and other electromechanical integration applications. AT8812C has two H-bridge drivers with a maximum output of 32V±1.2A. It can drive two DC brushed motors, a bipolar stepper motor, solenoids, and other inductive loads. The bipolar stepping motor can run in full step,2-subdivision, 4-subdivision, or realize high subdivision by software.
【产品】双通道H桥电机驱动芯片AT8822,采用ETSSOP16封装,电压范围5.5V-24V
中科微双通道H桥电机驱动芯片AT8822为玩具、打印机和其它电机一体化应用提供双通道电机驱动方案。该产品有两路H桥驱动,可驱动两路有刷直流电机、或一个双极步进电机、螺线管或其它感性负载。
电子商城
服务
可贴片PCB尺寸50*50mm-580*610mm;PCB厚度0.3-8mm;贴装精度CHIP元件+0.03,BGA Pitch 大于0.25mm;元件尺寸0201-74*74BGA;元件高度:30mm。
最小起订量: 1 提交需求>
可定制LAMP LED、 CHIP LED、 PLCC LED、 汽车用车规级LED、COB LED的尺寸/电压/电流等参数,电压1.5-37V,电流5-150mA,波长470-940nm。
最小起订量: 30000 提交需求>
登录 | 立即注册
提交评论