Solutions for Large Frequency Deviation in Both Active and Passive Crystal Oscillators
What should I do if the frequency deviation of the crystal oscillator is too large? There are two types of crystal oscillator application solutions: Active crystal oscillator solutions and Passive crystal oscillator solutions.
Active crystal oscillator:
If the frequency deviation of the active crystal oscillator is too large, please choose an active crystal oscillator with higher frequency accuracy. At the same time, pay attention to the frequency stability of the crystal oscillator within the operating temperature range, which is generally clearly indicated in the crystal oscillator specifications.
Passive crystal oscillator:
Please pay attention to the operating temperature range of the crystal oscillator and its frequency stability within this range.
If the frequency deviation of the passive crystal oscillator is too large, it is recommended as follows.
If the phenomenon of excessive frequency deviation of crystal oscillator occurs at room temperature:
1. Please confirm if the crystal oscillator load capacitor CL is selected correctly;
2. Please choose a higher-precision crystal oscillator;
3. Please confirm if the external capacitor of the crystal oscillator is selected correctly;
4. Please make minor adjustments to the external capacitance of the crystal oscillator. If the external capacitance is raised, the output frequency of the crystal oscillator will decrease, while if the external capacitance is lowered, the output frequency of the crystal oscillator will increase.
5. Optimize circuit design to reduce interference from stray capacitors on the circuit board to the crystal oscillator;
6. Suggest an active crystal oscillator solution.
If the phenomenon of excessive frequency deviation of crystal oscillator occurs at low or high temperatures, it is recommended as follows:
1. Please select a wide temperature crystal oscillator that meets the requirements of the working temperature range;
2. Please conduct high and low-temperature tests on defective crystal oscillators to check whether the frequency temperature curve is abnormal, whether the SPDB, resistance, and DLD indicators meet the standards, etc.
- |
- +1 赞 0
- 收藏
- 评论 0
本文由ll转载自SJK News,原文标题为:Large Frequency Deviation,本站所有转载文章系出于传递更多信息之目的,且明确注明来源,不希望被转载的媒体或个人可与我们联系,我们将立即进行删除处理。
相关推荐
How to Select External Capacitors for Passive Crystal Oscillators?
Firstly, it should be noted that any crystal oscillator that requires an external capacitor is a passive crystal oscillator. Additionally, note that distinguishing between external capacitors C1 and C2 (ground capacitance, ground capacitance) is not equivalent to crystal oscillator load capacitance (CL).
设计经验 发布时间 : 2023-07-26
晶科鑫(SJK)晶体振荡器选型指南(简版)
描述- SJK founded in 1989,is a manufacturing-type enterprise of frequency control products.It owns independent brand SJK and complete product line including small SMD crystal oscillator,traditional DIP crystal and oscillator,high-end oscillator(including OSC,VCXO,TCXO,OCXO,VC-TCXO,LVDS/PECL output),SAW device,crystal filter(MCF) and other products.
型号- 7W,3S,7X,7Y,7Z,3V,3X,8N,8T,8W,5VH,7VH,9D,6LC,5D,9J,7DU1,5H,9M,5J,9N,7DU5,9P,9T,5P,1N,5S,9X,5T,5V,5X,1X,6A,6B,6C,6D,6E,6MF,5X2,6F,6G,6MH,6I,6K,7DUT,6N,2N,6S,6T,6V,6X,CF,6Z,2X,6RF,7B,6AW,6RH,7E,7F,3D,7H,7I,7J,7K,7L,3H,7M,7N,3J,7P,7Q,3N,7R,7S,7T,3P,7U,7V
SJK-7HF6250M3C0420F9 Crystal oscillator SMD HCSL Output 7.0*5.0*1.8 SPECIFICATION
型号- 7H SERIES,SJK-7HF6250M3C0420F9
1NP74250G18YC Crystal oscillator SMD CMOS Output 2.0×1.6×0.75mm SPECIFICATION
型号- 1NP SERIES,1NP,1NP74250G18YC
电子商城
现货市场
登录 | 立即注册
提交评论