Why Use Non-silicon Thermal Conductive Gasket?
The heat transfer efficiency of air is very low, so the air is also known as a bad conductor of heat, the machine equipment environment is relatively sealed, so the heat is not easy to disperse to the outside, in addition to optimizing the structure of the heating device, reduce the heat production when using, people will install the heat dissipation device to guide the excess heat to the outside.
Thermally conductive interface material is the general name of the material coated between the heating device and the heat dissipation device and reduces the thermal contact resistance between the two. Thermal conductive interface material can fill the gap between the heating device and the heat dissipation device, eliminate the air in the gap, reduce the thermal contact resistance between the two, and improve heat transfer efficiency.
A thermal conductive silicone pad is one of the thermally conductive interface materials, thermally conductive silicone pad is also one of the most commonly used thermally conductive interface materials on the market at present. The thermal conductive silicone pad is based on silicone oil as the base material, proportional to add heat, temperature resistance, and insulation materials for refining thermal conductive gaskets, with high thermal conductivity, low interface thermal resistance characteristics, and thermally conductive silicone pad soft and elastic, easy to rework.
The non-silicon thermal pad is a member of the thermal conductivity interface material, the difference between it and the thermally conductive silicone sheet is that it does not contain silicone oil, and can avoid the small molecules of siloxane precipitation in the application process, thus polluting the equipment parts, for some industry applications with special requirements have a good space for development, such as sensitive silicon equipment, high precision instruments, industrial cameras and so on. The non-silicon thermal conductive gasket is used in a similar way to the thermally conductive silicone sheet, so it is very convenient to use.
- |
- +1 赞 0
- 收藏
- 评论 0
本文由Vicky转载自SHEEN News，原文标题为:Why use non-silicon thermal pads?，本站所有转载文章系出于传递更多信息之目的，且明确注明来源，不希望被转载的媒体或个人可与我们联系，我们将立即进行删除处理。
相关推荐
Thermally Conductive Materials with Ultra-high Thermal Conductivity
The thermally conductive material is a general term for materials that are coated between the heating device and the cooling device of the equipment and reduce the contact thermal resistance between the two.
A Brief Description of Thermally Conductive Gap Filler Material-Silicon-free Thermal Pad
Power consumption electronic components are the main body of heat generation in electronic equipment. The higher the power of electronic components, the more heat they will generate. However, the development trend of science and technology in today‘s society is based on high performance, high integration and light weight. Mainly, the performance of electronic components is getting stronger and stronger, which also means that their power is also rising, so the heat dissipation must keep up with the pace.
Why Does Thermal Resistance Affect the Thermal Conductivity of Thermal Silicone Pad?
Thermal silicone pad is a kind of gap-filling thermal pad made of silicone resin as the base material and added with temperature-resistant and thermally conductive materials. It has the characteristics of high thermal conductivity, low thermal resistance, insulation, compression, etc.
A Brief Description of Thermally Conductive Materials - Thermally Conductive Gel
Thermally conductive gel is one of many gap-filling materials for thermally conductive materials. It can fully fill the gap between the contact interfaces and remove the air in the gap, thereby reducing the interface contact thermal resistance, so that heat can be quickly transferred to the radiator.
Sheen SF series Thermal Silicone Pad: Heat Dissipation Solution for DC Equipment MOS Shielding Cover
By integrating the Sheen SF series thermal silicone pad: a heat dissipation solution for DC equipment MOS shielding cover, engineers can achieve precise management of heat, which not only maintains the stable operation of electronic components but also significantly improves the efficiency and reliability of the entire system. In the pursuit of more powerful, safer, and more environmentally friendly electronic devices, Sengen SF series thermally conductive silicone sheets are undoubtedly a trustworthy material choice.
Will the Silicon-free Thermal Pad Produce Oil?
There are many kinds of thermal conductive materials, such as thermally conductive silica gel, silicon-free thermal conductive film, thermally conductive phase change film, thermally conductive gel, thermally conductive paste, carbon fiber thermally conductive gasket, thermally conductive insulating film, etc.
What Are the Characteristics of a Phase Change Thermal Pad?
The phase change thermal pad is a member of the thermally conductive material. , is also a very characteristic of a new type of thermal conductivity material. In this article, Sheen will introduce the characteristics of a phase change thermal pad.
Heat Dissipation Application of Thermal Materials in Outdoor Communication Cabinets
By filling the gap between the heat dissipation device and the heat source, Thermally conductive materials air between the interfaces is eliminated. This reduces the contact thermal resistance between the two, thereby improving the heat dissipation effect of the cabinet.
The Three Factors that Affect the Performance of the Thermal Silicone Pad During Use
Thermal silicone pad is one of the more commonly used traditional thermal conductive materials. It is a kind of soft silicone as the base material and is made of thermally conductive, temperature-resistant, and insulating materials in a certain proportion.
Selection of Thermally Conductive Silicone Pad
According to Sheen, when selecting a thermally conductive silicone pad, some factors should be considered: thermal requirements, temperature range, compressibility and elasticity, chemical resistance and machinability.
Application of Thermal Silicone Pad in Fast Charging Source Adapter
Thermal silicone pad is one of the more commonly used traditional thermal conductive materials. It is a kind of soft silicone as the base material, and a thermal silicone pad made of a certain proportion of thermally conductive, temperature-resistant and insulating materials.
Why Use Thermally Conductive Materials?
The purpose of using a thermal interface material is to fill the gap between the two and remove the air in the gap, thereby reducing the heat dissipation of the heating device and the cooling device. Indirect contact thermal resistance, thereby increasing the rate of heat transfer.
【技术】解析盛恩碳纤维导热垫片对比传统硅胶垫片的优势
碳纤维导热垫片，有的企业称各向异性导热垫片，能比传统的导热硅胶片高出几倍乃至十几倍的导热性能。原因在于导热成分的不同。本文中将为大家解析盛恩碳纤维导热垫片对比传统硅胶垫片的优势。
盛恩导热绝缘片最高耐电压大于8KV，导热系数可达5W/m·k
人们常见的电压在220V，但是有用电设备能够在瞬间放电达到上千伏特，如果普通的导热材料容易被击穿而失去其作用，所以需要使用到能够耐高电压的导热材料。盛恩研发生产的导热绝缘片，耐电压可达至大于8KV，同时导热系数可以做到5W/m·k，欢迎咨询世强平台。
Thermally Conductive Interface Materials Applied To Home Energy Storage
The home energy storage system adds lithium battery storage power on the basis of the traditional PV grid-connected power generation system, a new type of hybrid system of energy acquisition, storage and use combined by the battery, hybrid inverter and PV panel. The photovoltaic inverter converts solar energy into electricity for storage, and the storage inverter can complete the discharge of the battery by converting the current.
电子商城
现货市场
服务
使用FloTHERM和Smart CFD软件，提供前期热仿真模拟、结构设计调整建议、中期样品测试和后期生产供应的一站式服务，热仿真技术团队专业指导。
实验室地址： 深圳 提交需求>
提供稳态、瞬态、热传导、对流散热、热辐射、热接触、和液冷等热仿真分析，通过FloTHERM软件帮助工程师在产品设计初期创建虚拟模型，对多种系统设计方案进行评估，识别潜在散热风险。
实验室地址： 深圳 提交需求>
授权代理品牌：集成电路
授权代理品牌：分立元件
授权代理品牌：接插件及结构件
授权代理品牌：部件、组件及配件
授权代理品牌：电源及模块
授权代理品牌：电子材料
授权代理品牌：仪器仪表及测试配组件
授权代理品牌：电工工具及材料
授权代理品牌：机械电子元件
授权代理品牌：加工与定制
我要提问
登录 | 立即注册
提交评论