Selection Recommendations for ESD Devices
Introduction:
ESD is one of the most common causes of failure in electronic components and circuit boards. When the human body or other charged objects come into contact with electronic components or circuit boards, a high voltage charge may be generated, forming an ESD discharge. ESD discharge can generate transient high voltages and high currents on electronic components and circuit boards, causing damage or failure of their electrical and mechanical properties, thereby reducing the reliability and stability of the system. In order to protect electronic components and circuit boards from ESD damage, ESD protection circuitry needs to be added to the circuit design. ESD protection circuits are usually implemented using ESD devices.
Selection steps:
1. Application scenario analysis
First of all, it is necessary to analyze the application scenario, clarify the electronic components or circuit boards that need to be protected, and understand their operating conditions, signal characteristics, power requirements, and other factors to determine the application scope and requirements of ESD devices.
2. ESD level
According to the ESD level requirements of the application scenario, select the appropriate ESD device. The ESD level refers to the amount of energy that the device can withstand the ESD discharge and is usually expressed in terms of the maximum ESD discharge voltage and the maximum ESD discharge current. ESD grades generally include the Human Body Model (HBM), Machine Model (MM), Charged Device Model (CDM), etc., of which HBM is the most widely used ESD level. HBM refers to the ESD discharge generated when the human body contacts the device, and its discharge energy is generally between 1kV~8kV. According to the ESD level requirements of the application scenario, select ESD devices that can withstand the corresponding ESD level.
3. Protect the direction
According to the protection direction of the electronic components or circuit boards that need to be protected in the application scenario, select the appropriate ESD device. The protection direction of ESD devices is divided into two types: unidirectional and bidirectional. Unidirectional ESD devices can only protect the forward ESD discharge in the circuit, while bidirectional ESD devices protect both forward and reverse ESD discharges. According to the protection direction of the electronic components or circuit boards that need to be protected in the application scenario, select the appropriate ESD device.
4. Package form
According to the size limitation and process requirements of the application scenario, select the appropriate ESD device packaging form. There are many package forms of ESD devices, such as SOT23, SOD323, SOD523, DFN, QFN, etc. It needs to be selected according to the actual application environment and requirements.
5. Working voltage
According to the operating voltage requirements of the application scenario, select the appropriate ESD device. ESD devices with different operating voltages have different parameters such as flyback voltage and protection current, which need to be selected according to the actual situation.
6. Capacitance value
According to the capacitance value requirements of the application scenario, select the appropriate ESD device. The capacitance value of the ESD device usually affects the performance indicators such as the reaction speed of the device and the ESD energy consumption, and needs to be selected according to the actual situation.
7. Reverse withstand pressure
According to the reverse withstand voltage requirements of the application scenario, select an ESD device with sufficient reverse withstand voltage capability. An ESD device with insufficient reverse withstand voltage capability can break down at the reverse voltage, causing the device to fail.
8. ESD protection requirements
According to the ESD protection requirements of the application scenario, select the appropriate ESD device. ESD protection requirements include maximum ESD discharge voltage, maximum ESD discharge current, ESD protection efficiency, etc. It needs to be selected according to the actual application environment and requirements.
Conclusion:
Through the interpretation of ESD device selection steps and common parameters, we can have a clearer understanding of how to choose ESD devices suitable for the products. In practical applications, we need to consider various factors according to actual needs and application scenarios and select qualified suppliers to ensure the quality and reliability of selected devices and improve product competitiveness and user satisfaction.
- |
- +1 赞 0
- 收藏
- 评论 0
本文由叫我大表哥吧转载自HUA XUAN YANG ELECTRONIC News，原文标题为:Selection recommendations for ESD devices，本站所有转载文章系出于传递更多信息之目的，且明确注明来源，不希望被转载的媒体或个人可与我们联系，我们将立即进行删除处理。
相关推荐
【经验】TVS选型为何应尽量选用单向TVS？
TVS（Transient Voltage Suppressor）是一种用于电路保护的器件，用于抵御瞬态过电压，而单向TVS和双向TVS是两种不同类型的TVS器件，它们在应用中有一些区别。本文中华轩阳电子将为大家解析TVS选型尽量选用单向TVS的原因。
设计经验 发布时间 : 2023-08-23
【经验】选择性价比高、寿命长、可靠性强、稳定性高、契合度高的MOSFET时需要考虑的5大参数因素
选择一个性价比高、寿命长、可靠性强、稳定性高、契合度高的MOSFET时，需要考虑以上几个因素和参数，并且需要确保导通电阻RDS(on)符合需求。只有在这些因素和参数都满足的情况下，才能选出最适合电路的MOSFET。为了确保电路的稳定性和可靠性，我们建议在选择MOSFET时，不要妥协任何一个因素或参数，而是要注重整体性能。
设计经验 发布时间 : 2023-07-07
解析应用于PoE通讯设备中的功率器件如何实现卓越的性能和稳定的运行
Power Over Ethernet（PoE）技术作为一项重要的创新，为我们的设备提供了方便、高效的供电方式。本文华轩阳电子聚焦于PoE通讯设备中的关键功率器件，即MOS管、TVS管和整流桥，探讨它们如何共同协作，以实现卓越的性能和稳定的运行。
设计经验 发布时间 : 2024-05-16
Why Is It Important to Prioritize Electromagnetic Compatibility (EMC) in Circuit Design?
We live in a world full of various electronic devices, from smartphones, and computers to televisions and household appliances, which constantly emit and receive electronic signals. However, when these devices work, they generate electromagnetic fields that may affect the normal operation of other devices. This leads to an important concept that we must pay attention to when designing circuits - electromagnetic compatibility (EMC). Imagine in an ordinary home environment, your phone is charging while your TV is playing programs.
技术探讨 发布时间 : 2023-12-21
华轩阳电子MOS选型表
华轩阳电子MOS选型表包括P型场效应晶体管、N型场效应晶体管、P+P型场效应晶体管、N+N型场效应晶体管、N+P型场效应晶体管五种类型，主要有以下选型参数：VDSS耐压(V)18~650V;ID电流(A)0.1A~400A;RDS电阻(mΩ)@4.5V MAX)2.4~14000mΩ;应用等级均为民用级。
|
产品型号
|
品类
|
类型
|
VDSS耐压(V)
|
ID电流(A)
|
RDS电阻(mΩ)@4.5V MAX)
|
封装
|
应用等级
|
|
HXY2301AI
|
P型场效应晶体管
|
P沟道
|
20V
|
3A
|
87mΩ
|
SOT-23
|
民用级
|
选型表 - 华轩阳电子 立即选型
华轩阳电子ESD/TVS静电浪涌保护元器件 —— 您值得信赖的选择
在当今高速发展的电子设备市场中，静电放电和瞬态电压尖峰已成为影响产品可靠性和使用寿命的重要因素。为了应对这些挑战，华轩阳电子作为一家半导体元器件供应商，致力于提供高质量、高性能的ESD/TVS保护解决方案。
产品 发布时间 : 2024-09-06
华轩阳电子LDO选型表
华轩阳电子LDO选型表包括以下品类：100mA线性稳压器，1A线性稳压器，250mA线性稳压器，300mA低压差线性稳压器，500mA低压差线性稳压器，500mA线性稳压器，50mA线性稳压器；并包含以下几种封装：SOT-223，SOT-23，SOT-89，SOT89-3L，TO252-2L；应用等级 皆为民用级，输出类型皆为固定，输出极性皆为正。
|
产品型号
|
品类
|
输入电压(V)
|
输出电压(V)
|
输出电流(mA/A)
|
封装
|
应用等级
|
输出类型
|
输出极性
|
|
HXY6206I-2.5
|
低压差线性稳压器
|
8V
|
2.5V
|
300mA
|
SOT-23
|
民用级
|
固定
|
正
|
选型表 - 华轩阳电子 立即选型
原装替代，降低50%器件成本，高性能MOSFET厂商华轩阳电子授权世强硬创代理
MOSFET的SGT芯片工艺使寄生电容值至少降低30%，开关速度、开关损耗等参数得到显著改善；而Clip封装工艺搭配着芯片减薄技术，将RDon降低至1mR以下。
签约新闻 发布时间 : 2023-07-26
华轩阳电子二极管选型表
华轩阳电子二极管选型表包含以下几种类型的二极管：超快恢复二极管、静电放电保护二极管、开关二极管、稳压二极管、肖特基二极管、整流桥二极管。应用等级均为民用级，并包含以下四种二极管配置方式：1对串联式、1对共阳极、1对共阴极、独立式。其中静电放电保护二极管有1/2/3/4/5通道类型，和双向二极管 、单向二极管两种二极管。
|
产品型号
|
品类
|
封装
|
应用等级
|
VRWM(V)
|
VC(V)
|
CJ(pF)
|
IPP(A)
|
通道类型
|
二极管方向
|
|
HESDUC5VB1AF-A
|
静电放电保护二极管
|
DFN1006-2L
|
民用级
|
5V
|
22V
|
0.35pF
|
4A
|
1通道
|
双向二极管
|
选型表 - 华轩阳电子 立即选型
华轩阳电子（HUA XUAN YANG ELECTRON）MOSFET选型指南
目录- MOSFET绝佳时机 企业简介及成长过程 产品介绍 产品封装介绍 MOSFET产品选型表 SiC/GaN功率器件产品选型介绍 MOSFET产品应用举例 增值服务
型号- HXY120P03P,HXY150N03P,HXY120P03T,HXY15P06D,HXY150N03T,HXY150N04D,HXYG110N06NF,HXY25G02DF,HXY13P10D,HXY7H03DF,HXY3N06AI,HXYJ40N65MP,HXYG80N10P,HXYG110N12T,HXY120P03D,HXYG80N10T,HXYG110N12P,HXY70N20MP,HXY30P03D,HXY80N06NF,HXY3400AI,HXY70P02D,HXY25N50MP,HXY15P04D,HXY3416MI,HXY60N03D,HXY2320MI,HXY30P04D,HXY50N06DF,HXY4953A,HXY1N10BI,HXY18N20D,HXY4409A,HXY13P20D,HXY8804DF,HXY70P03D,HXY60N04D,HXY2N60P,HXY50P04NF,HXY13P20P,HXY06506ID,HXYG110N10P,HXY10N40F,HXY60N03Y,HXY5N10S,HXY50N06CP,HXY150N03D,HXY2N60D,HXY10N40P,HXY2N60F,HXY18N20P,HXY8205A,HXYG110N10T,HXY4959A,HXY06506FD,HXY9N90P,HXY12010LD,HXY9N90F,HXY003N170SICMP,HXYG100N10NF,HXY10N65F,HXY12020HD,HXY30P10D,HXY8P04S,HXY10N65P,HXY40P10NF,HXY85N03NF,HXY18N50F,HXY120N04P,HXY4H03LI,HXY120N04T,HXYG180N10T,HXY2310MI,HXY30P12DF,HXYG180N10P,HXY18N50P,HXY030N120SICMP,HXY3N30H,HXYJ7N60D,HXY2N65P,HXY30N06D,HXYJ7N60F,HXY30P04NF,HXYJ7N60P,HXY2N65D,HXYG6ON10NF,HXY4957A,HXY2N65F,HXY5N04MI,HXY06508ID,HXY06506ED,HXY3407MI,HXY20N65P,HXY9435A,HXY12020LD,HXY5N10BI,HXY20N65F,HXYJ4N65P,HXY2311MI,HXYJ4N65D,HXYJ4N65F,HXY80N03NF,HXY3401AI,HXY20N06Y,HXY06508FD,HXY4N60P,HXY10G03DF,HXY4N60F,HXY20G06GD,HXY2302AI,HXY4N60D,HXY8N06S,HXY5G03DF,HXY10G03S,HXY100N065SICMP,HXY30N06DF,HXY80P06P,HXY100N10P,HXY15N04S,HXY20P02D,HXY12010HD,HXY80P06T,HXY2N100D,HXY10G04ES,HXY6V04S,HXY3N90F,HXY03N60I,HXY150P03P,HXYG30N10AD,HXY100P03NF,HXY10G04S,HXY150P03T,HXY2309MI,HXY10G04DF,HXY3412MI,HXY40P02DF,HXYO1P10I,HXY12010ID,HXY2N20MI,HXY120N04D,HXY016N65GANNF,HXY2303AI,HXY3N90P,HXY5N50D,HXY15N10D-L,HXY10P12DF,HXY06508ED,HXY5N06MI,HXY06506AD,HXY3401MI,HXY120N03NF,HXY50P03DF,HXY20N06D,HXY15H06NF,HXY15G04NF,HXY100N04D,HXYJ4N60P,HXY10H03S,HXY3415MI,HXYJ25N60F,HXY3H06S,HXY50P06T,HXYJ4N60F,HXYJ25N60P,HXY100N03T,HXY20G04GD,HXY30P06D,HXY20N15D,HXY20N03D,HXY34N20P,HXYJ4N60D,HXY100N03P,HXY3404MI,HXY100N03D,HXY5N20D,HXY15HO3NF,HXY20N03S,HXYJ7N65F,HXYG220N08P,HXYJ7N65D,HXYG20N06S,HXY12N65F,HXYG220N08T,HXY10G06NF,HXY50P06P,HXY20N04D,HXY4N65P,HXY20P02DF,HXY50P06D,HXYJ7N65P,HXY4N65D,HXY4407A,HXY3N06MI,HXY3205P,HXY4N65F,HXY2305BI,HXY12N65P,HXY100N06D,HXY10P02DF,HXY70P10D,HXY6N03SI,HXY5P04MI,HXY85N08BT,HXYG40N10D,HXY10G03GD,HXY4N10MI,HXY06510ND,HXY30P03DF,HXY2305AI,HXY5N30D,HXYG12N10D,HXY50N20MP,HXY10N60P,HXY100N04NF,HXY15N06S,HXY10N60F,HXY70P10T,HXYG40N10S,HXY70P10P,HXY85N08BP,HXY2N30MI,HXY10H06S,HXY06508AD,HXY20H06NF,HXY8806DF,HXY10G03ES,HXY55N10T,HXY90P03NF,HXY55N10F,HXY5G06S,HXYJ25N65F,HXY80N10NF,HXY80N03D,HXY65N06NF,HXY55N10P,HXYJ60N60MP,HXY9926A,HXY9P20D,HXY10N06S,HXY3N10BI,HXY100N06T,HXY12003ID,HXY9P20P,HXY135N03NF,HXY80N04D,HXY2334CI,HXY50N25MP,HXY100N06P,HXY35P06NF,HXYG100N08T,HXY70N10CP,HXY2305MI,HXY15G02DF,HXY06510ID,HXY50N06P,HXY3G02LI,HXY40N02D,HXY15V06NF,HXY15N65P,HXY8814A,HXY20G03GD,HXY3407AL,HXY2311BI,HXY80N05D,HXY15N65F,HXY2311AL,HXYG100N08P,HXY15G03ES,HXY12010AD,HXY70N04NF,HXYG60N10S,HXY100P03D,HXYG60N10P,HXY9928A,HXY6H04S,HXY8G10NF,HXYG60N10D,HXY3407AI,HXY80N06P,HXY80N06D,HXY17N25D,HXY50N06D,HXY20H04NF,HXY10P04D,HXY50P10T,HXY80N06T,HXY17020LD,HXY7N50D,HXY4N80P,HXY50P10P,HXY20G03NF,HXY70N03NF,HXY40N03S,HXY4N80F,HXY80N07P,HXY8808CF,HXY10H03DF,HXY2300AI,HXY15G04ES,HXY50N05D,HXY60N04DF,HXYG60N12T,HXY80N08D,HXYG60N12P,HXY60N06HP,HXY80N07T,HXY3400MI,HXY50P10D,HXY5N100F,HXY3P10MI,HXYG20N10D,HXY2301BI,HXY4435A,HXY50N04D,HXY220N04T,HXY12N60P,HXYG130N10P,HXY2307MI,HXY5N100P,HXY17040HD,HXYG130N10T,HXY3410MI,HXY20G04NF,HXY220N04P,HXY06510ED,HXY20N02DF,HXY20P03D,HXY8809CF,HXY2301AI,HXY12N60F,HXY50N15D,HXY50N03D,HXY8V04S,HXY8810A,HXY90N08T,HXYJ25N65P,HXY90N08P,HXY15N10Y,HXY7N65F,HXY7N65D,HXY25P06D,HXY13N50F,HXY06510FD,HXY15N10S,HXYJ30N65MP,HXY70N20P,HXY7N65P,HXY5N10SI,HXY13N50P,HXY15N10D,HXY80P04D,HXY2302BI,HXY220N04NF,HXY70N20T,HXY3P06AI,HXY20N50P,HXY50N06NF,HXY20N50F,HXY2300MI,HXY60P04D,HXY3415AI,HXYG130N08P,HXY5N10LI,HXYG130N08T,HXY25N15NF,HXYG120N10T,HXY15N60P,HXYG120N04NF,HXY4N15MI,HXY2312MI,HXYG120N10P,HXYJ30N60MP,HXY60P03D,HXY15N60F,HXYG170N1OT,HXY5N10MI,HXY12003AD,HXY18P20P,HXY3404AI,HXY60N02DF,HXY180N03P,HXY25N10S,HXY40N15NF,HXY06510AD,HXY20N60P,HXYG130N06NF,HXY20H06S,HXY70N03DF,HXY7N60D,HXY20N60F,HXY1N65H,HXY6G03LI,HXY7N60F,HXY25N10D,HXY180N03NF,HXYG40N10NF,HXY7N60P,HXY4P20P,HXY9N20D,HXY4P20D,HXY105N03D,HXY2313MI,HXY60N03DF,HXY007N65GANNF,HXY85N04NF,HXY3409MI,HXYG110N06D,HXYJ60N65MP,HXYG110N06P,HXYG170N10P,HXYJ40N60MP,HXY80N04DF,HXYG170N10T,HXYG180N04P,HXY50N10D,HXY80N10D,HXYG110N06T,HXYG180N04T,HXY30N15D,HXY6P04S,HXY180N03T,HXY3P04AI,HXY6H03S,HXY20H04S,HXY06506ND,HXY8205S,HXY9N50D,HXY06508SD,HXY8H04S,HXY35P10NF,HXY30N20D,HXY50P03NF,HXY2314MI,HXY6N80P,HXY110N15T,HXY110N15P,HXY10N15D,HXY80N03DF,HXY80N08NF,HXY110N04D,HXY60NO3NF,HXY6N80F,HXY12H02TS,HXY2N7002AI,HXYG130N06D,HXY110N03D,HXY8H06S,HXY3416AI,HXYG130N06P,HXY55N10CP,HXY2315MI,HXY6G03S,HXY80N02DF,HXY3N100D,HXY130N20MP,HXY160N04P,HXY70P03NF,HXY80N02D,HXY10N04S
与您共享“芯”未来，共绘科技蓝图——华轩阳电子·慕尼黑电子展会特辑，提供卓越国产化元器件解决方案
在这个充满创新与机遇的时代，华轩阳电子荣幸地参加了2024年度上海慕尼黑电子展会（半导体元器件展览会），与全球电子行业的同仁们共同见证了科技的飞跃与进步。本次展会不仅是技术交流的盛宴，更是公司展示与分享的重要平台。本文，华轩阳电子带着满满的收获和激动的心情，邀请您一同回顾那些难忘的瞬间。
原厂动态 发布时间 : 2024-07-24
电子商城
服务
测试等级：空气放电30KV±5%；接触放电30KV±5%，适用标准：GB/T 17626.2、IEC61000-4-2、ISO10605、GB/T 19951；给用户产品出电路保护设计方案建议及整改。点击预约，支持到场/视频直播测试，资深专家全程指导。
实验室地址： 深圳/上海 提交需求>
整体外形尺寸小至0.6*0.3*0.3mm (DFN0603)，工作电压范围覆盖2.5V~36V，电容值低至0.2pF，浪涌能力最高可达240安培，静电等级可达空气放电、接触放电±30KV。提供免费浪涌测试仪、静电测试仪测试。
提交需求>
授权代理品牌：集成电路
授权代理品牌：分立元件
授权代理品牌：接插件及结构件
授权代理品牌：部件、组件及配件
授权代理品牌：电源及模块
授权代理品牌：电子材料
授权代理品牌：仪器仪表及测试配组件
授权代理品牌：电工工具及材料
授权代理品牌：机械电子元件
授权代理品牌：加工与定制
我要提问
登录 | 立即注册
提交评论