Vincotech‘s PFC Module flowANPFC 0: Here To Gear Up Three-phase Applications
flowANPFC 0 - featuring an advanced neutral boost PFC topology
VINCOTECH's flowANPFC 0 power modules featuring an advanced neutral boost PFC topology are aimed to help vendors step up efficiency and drive down costs. This ultra-compact module packs a lot of power into a petit housing. Offering impressive performance at a remarkably low price, the flowANPFC 0 line goes a long way toward cutting manufacturers' overall system costs. These modules feature a unique PFC topology for three-phase applications that deliver up to 40kW. Equipped with the latest high-speed, 650V IGBT chip technologies, flowANPFC 0 modules can serve to attain switching frequencies up to 75kHz. Integrated NTCs monitor temperature and built-in snubbing capacitors improve EMC. The flowANPFC 0 modules come in compact, low-inductive flow 0 housings 12 mm in height. Press-fit pins and phase-change material are available on request. Both make assembly much easier, and the phase-change material also improves thermal performance.
Features
IGBT H5 with Si Diode
Only a single gate driver is required (Lower system cost)
Integrated capacitors
Efficiency is the same as SPFC
NTC
flow 0 12mm²-clips solder-pin
PCM available on request
Applications
Charger
SMPS
UPS
ESS
- |
- +1 赞 0
- 收藏
- 评论 0
本文由洛希转载自Vincotech News，原文标题为:VINCOTECH'S NEW PFC MODULE: HERE TO GEAR UP THREE-PHASE APPLICATIONS，本站所有转载文章系出于传递更多信息之目的，且明确注明来源，不希望被转载的媒体或个人可与我们联系，我们将立即进行删除处理。
相关研发服务和供应服务
相关推荐
Vincotech‘s 1200V flowIPM 1C Power Modules with Higher Integration and more Sophisticated Subsystems
Catering to manufacturers seeking higher integration and more sophisticated subsystems to cut systems‘ cost and assembly time, Vincotech‘s 1200V IPM achieves the deepest level of integration of any power module available on the market today.
Vincotech‘s fastPACK 0 MOS and fastPACK 1 MOS Modules Featuring Cost-effective H-bridge Topology with MOSFETs
Exceedingly efficient, remarkably reliable, and featuring cost-effective H-bridge topology with MOSFETs and integrated capacitors in a rugged housing, Vincotech power fastPACK 0 MOS and fastPACK 1 MOS modules are suitable for both soft- and hard-switching applications.
Use Vincotech 30kW-2400V/150A Three-level Modules flowNPC 1 to Advance High-voltage Devices
Vincotech supports you for the future market with the unique flowNPC 1 split three-level solution for high voltage solar and ESS applications. Enabling four-quadrant operation, this fast module concept using two low-inductive flow 1 modules, supports you in moving ahead competition.
10-FZ12NMA080SH01-M260F POWER MODULES datasheet
型号- 10-FZ12NMA080SH01-M260F-7,10-FZ12NMA080SH01-M260F,10-FZ12NMA080SH01-M260F-3
Vincotech Introduces a New Multi-sourced FlowPACK 1 H6.5 Family Power Module for Single-phase PV and ESS Systems
Vincotech‘s latest additions extends the family for bidirectional ESS applications. Engineered for applications from 3 kW up to 10 kW, these power modules are housed in 12mm, low-inductance flow packaging.
VINCOTECH – FIRST IN SIC-BASED POWER MODULES News Release
型号- 10-PG12NAB008MR02-LC59F36T,10-FY12B2A040MR02-L387L63,10-PG12NAC008MR02-LC69F36T,10-PC094PB017ME02-L620F36Y,10-PZ123BA040MR01-M909L68Y
Vincotech Helps Realize Integrating Power ICs into Chargers with No Development or Production Cost in 3 Months
By basing new product designs on a strategic platform provided by Vincotech, charger OEMs can benefit from constantly upgraded products using the latest, most efficient semiconductor technology, without incurring the high development and production costs normally associated with a short product lifecycle.
Vincotech’s Power Modules‘ Current Carrying Capability of a Standard Solder Able Pin and a Press-fit Pin
This application note investigates the current carrying capability of a standard solder able pin and a Press-fit pin for Vincotech’s power modules.
New Flow E SiC MOSFET-based Modules Can Extend The Power Cycling Lifetime by A Factor of 2 | Vincotech
The new flow DUAL SiC E1 and fastPACK SiC E1/E2 have been developed with the aim to make the EV offboard charger designs faster, smaller and more efficient. The modules are based on latest 650V and 1200V SiC MOSFET chip generations with an on-resistance as low as 5mOhm.
Stepping up to Peak Performance and Efficiency with Vincotech‘s SiC-driven Power Modules
With Vincotech‘s SiC-based power modules for charging stations, solar inverters, and other applications, you get the best of both. They let you supercharge performance and streamline designs.
Vincotech SiC Modules Enhance Your EV Charger, Superior Thermal Performance For Increased Lifetime, Higher Power And Improved Reliability
fastPACK E1 SiC and fastPACK E2 SiC modules have the industry standard 12 mm flow E1 and flow E2 housing. Featuring superior thermal performance and latest generation CREE CPM3 SiC-MOSFET technology, these power modules give you better efficiency and enable more compact designs.
Vincotech Offers Power Modules for 3 Main Photovoltaic (PV) Applications/Inverters
VINco X modules meet the demanding requirements for central inverters, while retaining the string inverter‘s speed and flexibility. Add-ons such as integrated snubber capacitors and asymmetric inductance are available to make this an even more persuasive package. The terminal connection allows DC and AC stages to be split, which makes busbar design that much easier.
Save up to 15% on System Costs with Vincotech‘s MiniSKiiP®DUAL Power Modules Product Line
With the addition of the MiniSKiiP®DUAL to our line of standard MiniSKiiP® power modules, a single platform now covers a very wide power range extending all the way up to 90kW for 650V and 1200V applications.
电子商城
现货市场
授权代理品牌：集成电路
授权代理品牌：分立元件
授权代理品牌：接插件及结构件
授权代理品牌：部件、组件及配件
授权代理品牌：电源及模块
授权代理品牌：电子材料
授权代理品牌：仪器仪表及测试配组件
授权代理品牌：电工工具及材料
授权代理品牌：机械电子元件
授权代理品牌：加工与定制
我要提问
登录 | 立即注册
提交评论