eCap Performance Sensor From TELE Haase Helps toSave Energy, High Accuracy Up to 0.01 %

The eCap from TELE Haase is a communication-enabled Performance sensor for the accurate measurement of analog values for digital data processing. It transmits the measured data via Modbus to a PLC or via IoT module to the cloud and can be used universally with its flexible functionality. Retrofitted without great effort, the performance sensor collects all relevant digital data for the optimization of machines and systems, and helps customers save energy – which is easy on both the machines and the budget.

Measuring and optimizing energy consumption

The TELE eCap helps customers use energy wisely and reduce operational expenses. The precise measurement of analog electrical values, which are read out from the machine by means of eCap, provides the user with a reliable database that can be digitally processed, prepared for analysis and visualized. Universally applicable, the eCap provides the right information for many different areas of application. Due to its fast data transfer, the eCap enables an immediate reaction to changing circumstances. In this way, the digital data obtained not only protects the equipment from damage or failure, but also helps to optimize efficiency and performance.

The eCap is ideally suited for:

• Energy Management

• Increasing energy efficiency

• Load balancing

• Process and plant monitoring

• Predictive maintenance

Data as a decisive factor

The eCap measures voltage and current with very high resolution and calculates many other values, such as power, power factor, energy or frequency. Communication takes place via Modbus RTU. Once measurement data from machines and plants are digitized, threshold values and functions of the plant can be set via the cloud or a PLC via software. In addition, the data can be recorded and used for data mining. This gives the user the ability to perform analysis, make forward-looking decisions to optimize the performance of their application. The eCap can be combined with PLCs, IoT gateways or similar systems, depending on the application.

It convinces with high technical performance:

• Excellent sampling resolution: 24 bit

• Very high sensitivity: 1/100,000 FMR

• High sampling rate: 9,800 samples/s

• Very high accuracy: up to 0.01 %

• Digital input for local integration of additional monitoring functions.

• 2 digital outputs for local activation of the monitored device, e.g. a drive or protective relay.

Convenient installation and personalization

The eCap has a compact installation width of 45 mm/1.8 inches and can be easily parameterized on the front of the device via screwdriver in a de-energized state. Customer-specific functions can be easily implemented and provide an accurate digital image of analog values and trends. Firmware updates are carried out via Modbus RTU.

With PLC or IoT module

An application example for the TELE eCap is the combination with a PLC. Here, the analog electrical values are read from the machine, converted into digital values and transmitted via cable (Modbus RTU) to a Modbus master. This variant enables the customer to access the digital data directly on site and to react promptly to the activity of the machine.

If the eCap is combined with an IoT module, the data collected from the machines can be transferred to the cloud via an Internet connection. In this way, users with various devices (PC, tablet, cell phone, etc.) can access the digital measurement data from anywhere in the world. In practice, the eCap can be integrated into both new and existing plants (retrofit).