A Brief Introduction of RJ45 Jack Category

时间： 2023-09-13 来源：LINK-PP News

技术问答

选型帮助

研发客服

商务客服

According to RJ45 module installation location, there are embedded, carpet type, desktop and universal four standard.

According to the shielding performance is divided into non-shielded modules and shielded modules. When installing shielded cable systems, the entire link must be shielded, including cables and connectors, all requiring shielded information modules.

According to whether the modules need to be terminated when the cable is terminated, the information module has a dozen type and a free type information module. Wire-style information module requires a dedicated cable tool to push the twisted-pair wire into the information module wiring slot. Free-line tool design is also a manifestation of the user-friendly design of the module, which eliminates the need for a dedicated tool when terminating the module.

In accordance with the different parts of the wiring, which is divided into two kinds of termination in the upper and tail termination, most of the products using the upper termination.

发送到邮箱 |
+1 赞 0
收藏
评论 0
| 转发至：

本文由涂抹转载自LINK-PP News，原文标题为:RJ45 Jack Category，本站所有转载文章系出于传递更多信息之目的，且明确注明来源，不希望被转载的媒体或个人可与我们联系，我们将立即进行删除处理。

全部评论（0）

暂无评论

【技术】解析RJ45信息模块的分类

根据RJ45模块安装位置不同，分为埋入（嵌入）型、地毯（地面）型、桌上型和通用型四个标准。本文中LINK-PP将为大家介绍RJ45信息模块的分类。

技术探讨发布时间 : 2023-04-01

【技术】关于10G网络变压器测试的一些答疑

本文中LINK-PP将为大家解析对于10G网络变压器测试的一些常见问题。

技术探讨发布时间 : 2023-02-14

Digital Ceiling – Tertiary Cabling in the Ceiling

For the current requirements with a view towards the future, the conventional network infrastructure for workplaces according to ISO/IEC 11801-2, and the ca-bling infrastructure could be combined via service con-centration points for distributed building services ac-cording to ISO/IEC 11801-6.The following figure shows the separate, application specific cabling and cabling with service concentration point for Wi-Fi applications.

技术探讨发布时间 : 2023-11-02

LINK-PP‘s Magnetic RJ45 Connectors Empowers Industrial Automation

This paper mainly introduces the application characteristics and advantages of LINK-PP RJ45 connector products in industrial automation

产品发布时间 : 2024-06-27

LINK-PP Offers Pioneering Connectivity Solutions Across Diverse Industries

LINK-PP‘s Magjacks, Modjacks, Magnetics, Cages, and Optical Transceivers are critical in modern data communication networks. These products are designed to provide high-speed, reliable data transmission and are widely used in various industries to meet diverse connectivity needs.

厂牌及品类发布时间 : 2024-07-13

LINK-PP（连普）是一家集研发、生产、服务于一体的高新科技企业，国内领先的电子磁性元器件、网络接口连接器制造商，致力于成为5G及其应用领域的优质产品和技术解决方案提供者。

RJ45连接器 RJ45网络接口 RJ连接器网络变压器网络模块 POE变压器

授权代理商 - 深圳市世强元件网络有限公司线上商城技术资料

展开

LINK-PP连接器选型表

LINK-PP连接器端子提供以下参数选型：Turns Ratio（%）：Pri:Sec =1CT:1CT ±2%，Hipot（Vrms）：1500Vrms MIN，Voltage rating(VAC)：125VAC RMS，Current Rating(AMP)：1. 5AMP，Operating Temperature(℃):-40℃~+85℃

产品型号	品类	Turns Ratio（%）	Crosstalk(dB Min)	Hipot（Vrms）	Operating Temperature(℃)
LP72488ANL	Magnetics Modules	Pri:Sec =1CT:1CT ±2%	1-125MHz:-30	1500Vrms MIN	-40℃~+85℃

选型表 - LINK-PP 立即选型

2-1775365-5 RJ45 Connectors 3D PDF

型号- 2-1775365-5

CAD模型库 - TE CONNECTIVITY - Revision F - 2013-09-24 PDF 英文下载

进军通讯市场，磁性元器件供应商LINK-PP（连普）授权世强硬创全线代理

连普作为成熟的网络变压器厂商，推出了2.5G、5G、10G等多款万兆以太网网络变压器，可满足各类高速万兆交换机等核心网板的需求。

签约新闻发布时间 : 2023-05-23

【应用】网络隔离变压器LP1188NL用于通讯模块，宽工温-40至85℃，绝缘耐压隔离可达1500V

客户在设计通讯模块，客户的网络隔离变压器主要应用在RJ45网口位置，需要电气隔离和信号隔离，根据客户的沟通，需要10/100BASE-T SINGLE PORT的变压器，推荐LINK-PP的型号LP1188NL。

应用方案发布时间 : 2023-03-16

2-1775365-1 RJ45 Connectors 3D PDF

型号- 2-1775365-1

CAD模型库 - TE CONNECTIVITY - Revision F - 2013-09-24 PDF 英文下载

【应用】连普LP5020NLR工业级网络变压器用于工业交换机，隔离电压可达1.5KV，工作温度为-40~+85℃

网络变压器，也被成为网口变压器，主要起到的作用是用于传输数据和防雷保护的作用，应用于交换机、路由器、网卡和Hub等设备上。本文主要简述了LINK-PP的网络变压器产品在交换机项目上的应用优势特性。

应用方案发布时间 : 2023-04-05

LINK-PP推出2.5/5/10G等多款万兆以太网网络变压器，满足各类高速万兆交换机等核心网板需求

LINK-PP作为成熟的网络变压器厂商，推出了2.5G、5G、10G等多款万兆以太网网络变压器，可满足各类高速万兆交换机等核心网板的需求；其中10G Base-T网络变压器采用PAM16调制，每对传输线的数据传输速率为800M Symbols/s。

厂牌及品类发布时间 : 2023-03-01

2-1734858-3 RJ45 Connectors 3D PDF

型号- 2-1734858-3

CAD模型库 - TE CONNECTIVITY - Revision B - 2019-02-27 PDF 英文下载

Link-PP Launched 2.5G 5G 10G and other high-rate 10 Gigabit Network Transformers

The rate 10G chip solution requires the stability of its products from the core components. LINK-PP has introduced a variety of 10 Gigabit Ethernet network transformers such as 2.5G 5G 10G. Can meet the needs of various types of high-speed 10-Gigabit switches and other core network boards.

产品发布时间 : 2023-09-13