Vincotech VINcoBOOST X4 Modules Switching Frequencies from 8 to 20kHz for 100 to 200kVA Three-phase PFC Applications
VINcoBOOST X4 products for 100 to 200 kVA three-phase PFC applications
VINCOTECH unveiled the VINcoBOOST X4 modules designed for UPS and other three-phase PFC applications with power ratings from 100 to 200 kVA and switching frequencies from 8 to 20kHz. VINcoBOOST X4 modules serve grid-connected UPS and other applications requiring three-phase, three-level active PFC. They are the solutions of choice wherever high conversion efficiency and fast switching frequencies are needed to decrease PFC chokes' size and cost. Onboard capacitors prevent destructive turn-off voltage overshooting. An optional snubber diode and a low inductive interface support switching loss-regeneration. The latter also enables an ultra-low-inductive connection to be made to a normal PCB board, in which case the high-power connection no longer needs to be low-inductive. The integrated NTC sensor provides a temperature signal to ensure reliable protection for the VINcoBOOST X4 module. The 400 and 600 A versions of the VINcoBOOST X4 are available with and without snubber diodes. Vincotech also offers the option of pre-applied thermal interface material designed for ultra-high performance.
General features:
High efficiency symmetric boost
Integrated DC-link capacitor
Low DC inductance (< 5 nH)
Screw terminals
VINcoBOOST X4 schematic
VINcoBOOST X4 modules at a glance
- |
- +1 赞 0
- 收藏
- 评论 0
本文由洛希转载自VINCOTECH News,原文标题为:NEW MODULES FOR UPS AND OTHER THREE-PHASE APPLICATIONS,本站所有转载文章系出于传递更多信息之目的,且明确注明来源,不希望被转载的媒体或个人可与我们联系,我们将立即进行删除处理。
相关研发服务和供应服务
相关推荐
VIncotech’s Mid-power VINcoPACK E3 in A Low-profile Package for Motion Control and UPS Applications
Vincotech now has extended the new industry-standard low-profile package for mid-power inverters by a sixpack configuration. Engineered mainly for industrial drives, solar power, and UPS applications, the VINcoPACK E3 raises the performance bar with its superior efficiency and reliability.
Vincotech’s 1200V/30A and 50A three-phase NPC Modules are Optimized for Three-phase Solar Applications
Upgrade your three-phase solar inverters using flow3xNPC 1 modules to the next class. Engineered for high power density, Vincotech’s three-phase NPC modules put your solar inverter on the fast track to the highest performance class for size, efficiency, and weight.
Stepping up to Peak Performance and Efficiency with Vincotech‘s SiC-driven Power Modules
With Vincotech‘s SiC-based power modules for charging stations, solar inverters, and other applications, you get the best of both. They let you supercharge performance and streamline designs.
VINCOTECH功率模块选型表
VINCOTECH提供以下技术参数的功率模块产品选型,提供PIM模块,6管(sixpack)模块,半桥(Half-Bridge)模块,全桥(H-Bridge)模块,I型三电平(NPC)模块,T三电平(MNPC)模块,升压(Booster)模块,电力电压模块等数十种拓扑的IGBT模块选型,电压范围600-1600V,电流范围4-1800A。
产品型号
|
品类
|
产品状态
|
拓扑
|
电压(V)
|
电流(A)
|
模块高度 (mm)
|
晶圆工艺
|
封装
|
10-0B06PPA004RC-L022A09
|
SiC功率模块
|
Series production
|
PIM+PFC(CIP)
|
600V
|
4A
|
17mm
|
IGBT RC
|
flow 0B
|
选型表 - VINCOTECH 立即选型
VINCOTECH-IGBT功率模块选型表
VINCOTECH提供以下技术参数的IGBT功率模块产品选型,VOLTAGEIN:600-1800V,CURRENTIN:4-1800A
产品型号
|
品类
|
SUB-TOPOLOGY
|
PRODUCT LINE
|
VOLTAGEIN(V)
|
CURRENTIN(A)
|
MAIN CHIP TECHNOLOGY
|
HOUSING FAMILY
|
HEIGHTIN(mm)
|
ISOLATION
|
V23990-K429-A40-PM
|
IGBT功率模块
|
CIB-KE-NTC
|
MiniSKiiP® PIM 3
|
1200
|
75
|
IGBT4
|
MiniSKiiP® 3
|
16
|
Al2O3
|
选型表 - VINCOTECH 立即选型
10-FZ12NMA080SH01-M260F POWER MODULES datasheet
型号- 10-FZ12NMA080SH01-M260F-7,10-FZ12NMA080SH01-M260F,10-FZ12NMA080SH01-M260F-3
New Flow E SiC MOSFET-based Modules Can Extend The Power Cycling Lifetime by A Factor of 2 | Vincotech
The new flow DUAL SiC E1 and fastPACK SiC E1/E2 have been developed with the aim to make the EV offboard charger designs faster, smaller and more efficient. The modules are based on latest 650V and 1200V SiC MOSFET chip generations with an on-resistance as low as 5mOhm.
电子商城
现货市场
服务
可定制均温板VC最薄0.4mm,有效导热系数超5,000 W / m·K(纯铜(401 W/m·K ,石墨烯1,200 W/m·K)。工作温度范围同时满足低于-250℃和高于2000℃的应用,定制最低要求,项目年采购额大于10万人民币,或采购台套数大于2000套。
提交需求>
可定制无线位移传感器量程范围10~600mm,采用了无线传输方式,可远程自动实时检(监)测位移量值,准确度级别(级):0.2、0.5;内置模块:无线传输模块、供电模块;传输距离L(m):可视距离1000 (Zigbee、 LORA)。
最小起订量: 1pcs 提交需求>
登录 | 立即注册
提交评论