Application of Thermal Silicone Pad in Fast Charging Source Adapter

时间： 2023-09-27 来源：SHEEN News

技术问答

选型帮助

研发客服

商务客服

Although the fast charging source adapter can charge quickly, there is also a problem: the heating problem is serious. The working time of more than two hours was originally reduced to less than one hour. This improves the charging efficiency, but it is also accompanied by an increase in heat generation. If the heat generation problem is too serious, it may cause the adapter to burn.

In order to effectively solve the heat generation problem of the fast charging source adapter, it is necessary to guide the heat to the shell as soon as possible to reduce the temperature. The internal space of the fast charging source adapter is very narrow, so there is air, which reduces the heat transfer efficiency and is not conducive to heat. Therefore, it is necessary to fill a thermal silica gel sheet between the heat source and the heat sink.

thermal silicone pad is one of the more commonly used traditional thermal conductive materials. It is a kind of soft silicone as the base material, and a thermal silicone pad made of a certain proportion of thermally conductive, temperature-resistant, and insulating materials. It has high thermal conductivity, low thermal resistance, insulation, resistance to cold and thermal shocks, etc., it acts between the heating element and the radiator, fills the gap between the interface and removes the air from the interface, reduces the contact thermal resistance, improves the thermal conductivity, and at the same time can provide insulation, shock absorption, and sealing.

By filling the pits between the gaps, the air is removed and the contact thermal resistance is reduced, so that the heat source and the heat sink can be in close contact, thereby improving the heat transfer efficiency, so that the heat can be quickly transferred from the heat source to the outside to ensure fast charging, the performance and reliability of the source adapter.

发送到邮箱 |
+1 赞 0
收藏
评论 0
| 转发至：

本文由上山打老虎转载自SHEEN News，原文标题为:Application of thermal silicone pad in fast charging source adapter，本站所有转载文章系出于传递更多信息之目的，且明确注明来源，不希望被转载的媒体或个人可与我们联系，我们将立即进行删除处理。

全部评论（0）

暂无评论

Thermally Conductive Materials with Ultra-high Thermal Conductivity

The thermally conductive material is a general term for materials that are coated between the heating device and the cooling device of the equipment and reduce the contact thermal resistance between the two.

技术探讨发布时间 : 2023-04-25

What is Thermal Pad?

Thermal pads are essential components in modern electronic devices, designed to facilitate efficient heat transfer from heat-generating components to heat sinks or other cooling solutions. Understanding what thermal pads are and their importance can help you choose the right material for your specific application.

技术探讨发布时间 : 2024-08-03

A Brief Description of Thermally Conductive Gap Filler Material-Silicon-free Thermal Pad

Power consumption electronic components are the main body of heat generation in electronic equipment. The higher the power of electronic components, the more heat they will generate. However, the development trend of science and technology in today‘s society is based on high performance, high integration and light weight. Mainly, the performance of electronic components is getting stronger and stronger, which also means that their power is also rising, so the heat dissipation must keep up with the pace.

技术探讨发布时间 : 2024-07-26

AI High Computing Power Server Heat Dissipation, Using Thermal Conductivity Materials above 8W/mk

The promotion of ChatGPT technology has further promoted the popularity of high-power application scenarios such as AI computing power. By connecting a large number of corpora to train models and achieve scene functions such as human-computer interaction, a large amount of computing power is required behind it. Synchronization consumption is greatly improved. With the continuous and rapid improvement of chip performance, the problem of heat dissipation has become more prominent.

技术探讨发布时间 : 2023-12-03

The Three Factors that Affect the Performance of the Thermal Silicone Pad During Use

Thermal silicone pad is one of the more commonly used traditional thermal conductive materials. It is a kind of soft silicone as the base material and is made of thermally conductive, temperature-resistant, and insulating materials in a certain proportion.

设计经验发布时间 : 2023-09-29

How to Choose from Silicone Thermal Pad and Phase Change Thermal Pad?

In the fields of electronic product manufacturing and the automotive industry, thermal management solutions are crucial for the performance and longevity of devices. The choice of thermal conductive materials directly affects the efficiency of heat dissipation. This article compares two commonly used thermal conductive materials: silicone thermal pads and phase change thermal pads.

技术探讨发布时间 : 2024-07-10

Why Does Thermal Resistance Affect the Thermal Conductivity of Thermal Silicone Pad?

Thermal silicone pad is a kind of gap-filling thermal pad made of silicone resin as the base material and added with temperature-resistant and thermally conductive materials. It has the characteristics of high thermal conductivity, low thermal resistance, insulation, compression, etc.

技术探讨发布时间 : 2023-09-28

Will the Silicon-free Thermal Pad Produce Oil?

There are many kinds of thermal conductive materials, such as thermally conductive silica gel, silicon-free thermal conductive film, thermally conductive phase change film, thermally conductive gel, thermally conductive paste, carbon fiber thermally conductive gasket, thermally conductive insulating film, etc.

技术探讨发布时间 : 2023-11-29

High Thermal Conductivity Silicone Pad: An Innovative Choice for Heat Dissipation of Electronic Products

As the main raw material for high thermal conductivity silicone pads, silica gel plays an important role in the heat dissipation modules of electronic precision machinery products due to its excellent thermal conductivity and ductility. The soft texture of high thermal conductivity silicone gaskets makes them an ideal padding material, which can effectively fill the gaps between small parts, thereby improving the efficiency of heat conduction. Its convenience and economy during use make it the preferred heat dissipation material in various industries.

原厂动态发布时间 : 2023-12-23

What Are the Characteristics of a Phase Change Thermal Pad?

The phase change thermal pad is a member of the thermally conductive material. , is also a very characteristic of a new type of thermal conductivity material. In this article, Sheen will introduce the characteristics of a phase change thermal pad.

技术探讨发布时间 : 2023-06-17

AF300 无硅导热垫片

型号- AF300

数据手册 - 盛恩 - 2023/5/8 PDF 中文下载

Sheen SF series Thermal Silicone Pad: Heat Dissipation Solution for DC Equipment MOS Shielding Cover

By integrating the Sheen SF series thermal silicone pad: a heat dissipation solution for DC equipment MOS shielding cover, engineers can achieve precise management of heat, which not only maintains the stable operation of electronic components but also significantly improves the efficiency and reliability of the entire system. In the pursuit of more powerful, safer, and more environmentally friendly electronic devices, Sengen SF series thermally conductive silicone sheets are undoubtedly a trustworthy material choice.

产品发布时间 : 2023-12-13

Does the Thermal Pad Need to Have Glass Fiber?

In order to increase the tensile strength and stability of the thermal pad, it needs to be reinforced with glass fiber, so that the toughness of the thermal pad is improved.

技术探讨发布时间 : 2023-09-29

Selection of Thermally Conductive Silicone Pad

According to Sheen, when selecting a thermally conductive silicone pad, some factors should be considered: thermal requirements, temperature range, compressibility and elasticity, chemical resistance and machinability.

设计经验发布时间 : 2023-08-29

Application of Thermal Conductive Materials in Charging Piles

In order to meet the effect of reaching full charge in the lowest time, the power of charging piles is often much greater than other charging equipment, especially some fast charging charging piles. Under normal circumstances, when the mobile phone is charging, the charger will heat up, not to mention the large size. “Charger“, because the higher the power, the higher the heat it emits, so timely heat dissipation is a problem that the charging pile must solve.

技术探讨发布时间 : 2023-11-30