Introduction to the Application of Fluoroplastics in the Cable Industry

时间： 2023-10-27 来源：Futureway News

技术问答

选型帮助

研发客服

商务客服

At present, in the production of wire and cable, the commonly used fluoroplastics include polytetrafluoroethylene PTFE, polyfluoroethylene propylene (FEP), polyvinylidene fluoride (PVDF), tetrafluoroethylene and ethylene copolymers, etc., of course, generally based on market prices In terms of distinction, PTFE is standing at the top of fluoroplastics, followed by PFA, and then FEP. At present, the most widely used market is FEP. Of course, some manufacturers choose PVDF/ETFE with a lower temperature grade for related wires. On the cable, our cable industry refers to these as Teflon materials or FEP materials. These materials are mainly used to manufacture various heat-resistant and high-temperature insulated wires, such as (oil) well cables, geological exploration cables, heating cables, and FEP materials. Class and Class H motor lead wires, radiation resistant wires, magnet wires, radio frequency coaxial cables, etc. Let's put it this way, all plastics that contain fluorine atoms in their molecular structure are collectively called fluoroplastics, and fluoroplastics consist of fluorine-containing monomers.

Monomers such as tetrafluoroethylene, hexafluoropropylene, chlorotrifluoroethylene, vinylidene fluoride, and vinyl fluoride are prepared through homopolymerization or copolymerization. With the continuous development of polymer technology, the variety of fluoroplastics is gradually increasing. The scope is expanding day by day. Due to the fluorine atom contained in the molecular structure of fluoroplastics, it has many excellent properties, such as excellent electrical insulation, high heat resistance, outstanding oil resistance, solvent resistance and abrasion resistance, and good moisture resistance. And low-temperature resistance. Therefore, fluoroplastics occupy an important position in the national defense, electromechanical, metallurgical, petrochemical, and other industrial sectors.

发送到邮箱 |
+1 赞 0
收藏
评论 0
| 转发至：

本文由逍遥哥哥转载自Futureway News，原文标题为:Introduction to the application of fluoroplastics in the cable industry，本站所有转载文章系出于传递更多信息之目的，且明确注明来源，不希望被转载的媒体或个人可与我们联系，我们将立即进行删除处理。

全部评论（0）

暂无评论

Application of Fluoroplastics in Aerospace Irradiation Cross-linked Wire and Cable

As we all know, fluorine-containing plastics and polyimides are very good wire and cable insulation materials. So far, they have occupied a very important position in aerospace cables.

技术探讨发布时间 : 2023-10-25

The Spring Of Fluoroplastics Is Here?

Only when the road of communication infrastructure is paved can we enter the application of 5G mobile phones and the Internet of Things. 5G radio frequency cables will drive the spring of fluoroplastics, and we will wait and see.

技术探讨发布时间 : 2023-11-05

Application Scenarios of Fluoroplastics in The Cable Industry

Fluoroplastics not only have outstanding electrical insulation, but also have a low dielectric constant and a particularly low loss factor, dielectric strength, dielectric constant (2.3~2.1), and volume resistivity in a wide temperature range and frequency range.

技术探讨发布时间 : 2023-10-28

Futureway®PTFE Tape Film Product

Teflon film is obtained by turning. It is molded into a tubular blank with suspended teflon resin, sintered in an oven, cooled and mature blank, and then turned by lathe or cutting machine. Therefore, many people call it Teflon turning film.

原厂动态发布时间 : 2023-10-21

Futureway Corrosion Resistance PTFE Film is Used in High-performance Cables

Polytetrafluoroethylene, commonly known as “Plastic King“, is a polymer compound formed by the polymerization of tetrafluoroethylene. It has excellent chemical stability, corrosion resistance, air tightness, high lubrication, non-sticking, electrical conductivity, insulation, and good anti-aging endurance.

原厂动态发布时间 : 2023-10-24

Application Principle of Expanded PTFE

Expanded polytetrafluoroethylene is made of polytetrafluoroethylene dispersion resin through a special processing technology. It has an ultra-microstructure of “knots and fibers“. By controlling the spacing of the knots, it can induce ingrown tissue cells.

技术探讨发布时间 : 2023-11-05

Why Do We Use Fluoroplastics?

The excellent performance of fluoroplastics is achieved by the high binding energy between carbon atoms and fluorine atoms.

技术探讨发布时间 : 2023-10-25

What is Fluoroplastic

Due to the fluorine atom contained in the molecular structure of fluoroplastics, it has many excellent properties, such as excellent electrical insulation, high heat resistance, outstanding oil resistance, solvent resistance and abrasion resistance, good moisture resistance, and low-temperature resistance.

技术探讨发布时间 : 2023-10-19

What Is Expanded Polytetrafluoroethylene

Expanded Polytetrafluoroethylene (expanded PTFE) is a new type of medical polymer material, made of PTFE resin by special processing methods such as stretching. It is white, full of elasticity and flexibility, and has a network structure formed by the connection of fine fibers.

设计经验发布时间 : 2023-11-02