Futureway®PTFE Tape Film Product
Futureway®PTFE Tape Film Product
Teflon film is obtained by turning. It is molded into a tubular blank with suspended teflon resin, sintered in an oven, cooled and mature blank, and then turned by lathe or cutting machine. Therefore, many people call it Teflon turning film. The PTFE turning film shall be rolled flat and the end face shall be neat. The film surface shall be free of creases, cracks, holes, mechanical damage and other defects that} affect the use requirements.
Teflon film is a kind of non directional film, and the surface is a little dark, which is the same as that of Teflon turning plate. In order to make the molecules of the turning film closer, enhance its pressure resistance, and make the thickness of the turning film more uniform. Through calendering, we reprocess the turning film to make it into an oriented film. After calendering, the molecular structure of the film is compact, the compressive strength is increased, the surface is smooth and crisp, the appearance is more flat, high-density, translucent or transparent.
polytetrafluoroethylene film oriented film is used to manufacture capacitors; Semi directional film is used for conductor insulation; Non directional film is used for wiring insulation of electrical instruments or as sealing gasket material. It can also be used as material for debonding and demoulding, high-frequency heating cable, temperature resistant wire, communication wire and cable, and other high-tech cutting-edge technologies in military industries such as aerospace and aviation. There are many specifications of PTFE directional film. During customization, the turning film shall be produced according to the specification requirements, and then calendered and oriented. The thickness during calendering shall not be too thick, otherwise, it will not reach the required thickness; If the turning film is too thin, it can not play the role of calendering orientation. In addition, the temperature control of calender is also a very important factor. The tetrafluoro turning film can be operated easily and ensures quality only within a certain temperature range. The between the two rollers shall be kept parallel to ensure uniform thickness of the directional film.
Polytetrafluoroethylene oriented film calendering polytetrafluoroethylene film shall be packaged reliably during transportation to prevent damage, impact, extrusion, sunlight, and rain. The products shall be stored in a clean warehouse free from extrusion and direct sunlight. Pure polytetrafluoroethylene has a pure white appearance, which makes it easy to absorb miscellaneous substances, which affects the appearance and increases the scrubbing workload, which needs to be sealed for disposal.
- |
- +1 赞 0
- 收藏
- 评论 0
本文由洛希转载自Futureway News,原文标题为:Futureway®PTFE Tape Film Product,本站所有转载文章系出于传递更多信息之目的,且明确注明来源,不希望被转载的媒体或个人可与我们联系,我们将立即进行删除处理。
相关推荐
Futureway®Full Density PTFE Tape Is Specially Designed for Low Loss Coaxial Cables, Aviation Wires, High-temperature Resistant Wires
Futureway®Full density PTFE tape is specially designed for high frequency, high power, low loss coaxial cables, aviation wires, high-temperature resistant wires, etc.
原厂动态 发布时间 : 2023-10-21
Futureway Corrosion Resistance PTFE Film is Used in High-performance Cables
Polytetrafluoroethylene, commonly known as “Plastic King“, is a polymer compound formed by the polymerization of tetrafluoroethylene. It has excellent chemical stability, corrosion resistance, air tightness, high lubrication, non-sticking, electrical conductivity, insulation, and good anti-aging endurance.
原厂动态 发布时间 : 2023-10-24
FUTUREWAY®SRL-1140F Battery Pack Sealing Material Meets IP67 Design Requirements
As the core component of a pure electric vehicle, the safety of the battery pack directly affects the safety of the whole vehicle. The battery pack should meet the design requirements of electrical equipment enclosure protection class IP67. So that it could effectively protect the internal components.
原厂动态 发布时间 : 2023-11-11
FUTUREWAY® FD-PTFE Full density & unsintered PTFE product Product Data Sheet
型号- FUTUREWAY® FD-PTFE,FD-PTFE
Futureway®FA221 Semi-oriented PTFE Films and Tapes Provides Outstanding Electrical Properties
FUTUREWAY®FA221 Semi-oriented PTFE films and tapes are manufactured from pure virgin PTFE, providing outstanding electrical properties and having the additional benefit of being extremely stretchable and conformable.
产品 发布时间 : 2023-10-24
Features of PTFE Film Tape
Features of PTFE Film Tape, such as heat resistance, low friction, non-stick and lubricity, chemical resistance, thermal stability and electrical insulation, electrical characteristics, non-combustibility, high and low temperature resistance.
技术探讨 发布时间 : 2023-11-04
Kinghelm KH-GX16-6P Aerospace Connector: Unmatched Reliability and Performance
The Kinghelm KH-GX16-6P, a high-performance aerospace connector designed to deliver exceptional reliability and stability. This connector set includes both male and female ends, ensuring a secure and robust connection for a range of demanding applications
产品 发布时间 : 2024-09-05
Futureway(富程威)有机硅材料选型指南
描述- 富程威成立于2010年,是由多名具有世界500强材料公司工作经验的人员创建的一家民营企业。公司专注于氟树脂、有机硅高分子高新材料的技术平台搭建、产品开发及市场应用,致力于突破行业核心技术壁垒。产品主要服务新能源汽车、轨道交通、航空航天、大数据等领域,密封、防火、隔热、缓冲、弹性支撑、微波传输、防水透气、爆破泄压等应用提供专业的解快方案。
型号- RTM-260,TIF-25,SRL-1150S,CC-40,RTL-E,CM-90,RTL-F,SR-1150,RTL-C,SRL-1140S,RTL-D,SRL-1130S,TIX-100,TIX-10,TIX-10C,EN-4S,CC-70T,EN-8,RTL-A,SRL-1130F,RTL-B,SRL-1150F,SRL-1140F,TIF-15
电子商城
登录 | 立即注册
提交评论