Application of Fluoroplastics in Aerospace Irradiation Cross-linked Wire and Cable

2023-10-25 Futureway News

As we all know, fluorine-containing plastics and polyimides are very good wire and cable insulation materials. So far, they have occupied a very important position in aerospace cables. However, with the development of aerospace technology, their shortcomings are also more obvious. The most representative typical fluoroplastics, including PTFE, PFA, and FEP, apart from insufficient mechanical strength and high specific gravity, the weakest point is poor radiation resistance. All plastics will produce chain scission under high-energy radiation. As for the amount of chain scission, the degree of chain scission, etc., various plastics have different performances. Under irradiation conditions, PTFE quickly decomposes after a few dosages. Among the fluoroplastics, ETFE and PVDF have high mechanical strength, small specific gravity, and radiation resistance, but they are used at low temperatures. PI, which was once widely used in aviation wires, cannot be used in aerospace because it is not resistant to string arcs, oxygen atoms, moisture, hydrolysis, and poor low-temperature bending properties. While researching and developing new varieties of fluoroplastics, we have modified various existing fluoroplastics in physical and chemical properties, or improved the cable insulation structure, such as the use of a composite insulation structure of PTFE and PI film, which makes their performance complementary in recent years. The general trend of the development of aerospace cables.


Insulation Materials

Cross-linkable ETFE is a copolymer of ethylene-tetrafluoroethylene containing a third monomer together with an appropriate amount of cross-linking agent and appropriate amount of pigments, lubricants, antioxidants, flame retardants, fibers or mineral fibers, Dyes, plasticizers, etc. are mixed together. In order to facilitate marking on the surface of the wire, a small amount of photosensitizer can be added.


Squeeze out

Cross-linked ETFE insulated wires can be single-layer insulation, but more are double-layer insulation. Double-layer insulation can be extruded at one time with a double-layer extruder, or it can be extruded in two layers. There is also a double-layer insulation with PVDF as the inner layer. The extrusion temperature distribution is roughly 200℃, 240℃, 275℃, 290℃, and an insulating layer with an insulation thickness of 0.13mm can be extruded under a reasonable mold configuration.


Crosslink

Radiation can be used for cross-linking at an appropriate dose rate, or the so-called "skin irradiation" technology can be used to control the voltage and dose of the accelerated particles to obtain satisfactory results.


New composite installation line

In order to make the wires have higher reliability, in order to reasonably utilize the advantages of different insulating materials and realize the complementary performance of the insulating materials, the so-called "composite installation line" with double or multilayer insulation is adopted. "Composite installation line" itself is not a new proposition. For example, polyvinyl chloride nylon insulated wires, polyvinyl chloride, polyvinylidene fluoride insulated wires, PTFE and PI composite installation wires, etc., have appeared long ago. Such installation wires, Especially composite installation lines have been widely used in aerospace installation lines. But the insulating layer and the layer can be separated (peelable).


The so-called new composite installation line is that the different insulation layers in the wire and cable are inseparable (non-peelable, or the peeling force is particularly large). The installation wire structure with PTFE insulation wrapped around PI insulation has been widely used, but its shortcomings are also obvious. First of all, it only has low, at best, moderate moisture resistance and cannot be marked with a laser. More serious is that it is not abrasion resistant. Once it is scratched, PTFE is easily scraped off. It has poor moisture resistance and is easily hydrolyzed, which reduces its insulation. In addition, PTFE is not resistant to radiation and is obviously not suitable for use in aerospace. The new installation line adopts coating hot-melt sealing material, and the outer layer adopts cross-linked ETFE, which overcomes the above shortcomings.


授权代理商:世强先进(深圳)科技股份有限公司
技术资料,数据手册,3D模型库,原理图,PCB封装文件,选型指南来源平台:世强硬创平台www.sekorm.com
现货商城,价格查询,交期查询,订货,现货采购,在线购买,样品申请渠道:世强硬创平台电子商城www.sekorm.com/supply/
概念,方案,设计,选型,BOM优化,FAE技术支持,样品,加工定制,测试,量产供应服务提供:世强硬创平台www.sekorm.com
集成电路,电子元件,电子材料,电气自动化,电机,仪器全品类供应:世强硬创平台www.sekorm.com
  • +1 赞 0
  • 收藏
  • 评论 0

本文由洛希转载自Futureway News,原文标题为:Application Of Fluoroplastics In Aerospace Irradiation Cross-linked Wire And Cable,本站所有转载文章系出于传递更多信息之目的,且明确注明来源,不希望被转载的媒体或个人可与我们联系,我们将立即进行删除处理。

评论

   |   

提交评论

全部评论(0

暂无评论

相关推荐

Top 5 Things You Might Not Know About PTFE Tapes

PTFE tapes are more than just high-temperature materials; they are versatile, durable, and engineered to meet stringent industry standards. Whether you’re looking for a reliable supplier for PTFE tapes or just exploring new materials for demanding applications, DeWAL PTFE tapes offer an exceptional combination of performance and reliability.

技术探讨    发布时间 : 2024-10-29

PTFE,a Perfluoropolymer Prepared by Radical Polymerization of Tetrafluoroethylene

PTFE is a perfluoropolymer prepared by radical polymerization of tetrafluoroethylene. It has a linear molecular structure of -CF2-CF2- repeating unit and is a crystalline polymer with a melting point of approximately 631℉and a density of 2.13-2.19g/cm³.

技术探讨    发布时间 : 2023-10-26

Fluoroplastic Insulated Cables Use Physical Foaming Technology

In order to meet the increasing safety performance requirements, the range of fluoroplastic materials is also expanding, and more and more materials with superior fire resistance have emerged, such as PFA, ETFE, and other fluoroplastics.

技术探讨    发布时间 : 2023-10-31

Rogers(罗杰斯)高频层压板材料和粘结材料选型指南(英文)

描述- Rogers Corporation is the world’s leading manufacturer of high performance dielectrics, laminates and prepregs used in microwave and RF printed circuit and related applications in Aerospace & Defense, Wireless & Wireline (digital) Infrastructure, Automotive Radar Sensor, Satellite TV, Mobile Internet Device and High End Chip Scale Packaging.

型号- RO4534,RO3203,RO4533,KAPPA® 438,RO4003C,RO4533™,AD300D-IM,CLTE-MW,COOLSPAN,ISOCLAD 933,RT/DUROID 6002,CUCLAD 217,AD255C,RO3035™,AD300D,COOLSPAN® TECA,RO4725JXR™,AD250TM,CUCLAD,CLTE™,6010.2LM,CLTE-AT™,RT/DUROID 6006,RO4003C LOPRO®,RO4730G3 LOPRO®,RO4534™,XTREMESPEED RO1200,CLTE SERIES,CUCLAD® 6250,RO4835T™,6002,RO3210,RO4350B LOPRO,AD350A™,AD255C™-IM,RO3006™,RO4730G3™,RO3010™,TC600™,RO3206,RO4535,RT/DUROID 6202PR,RO4535™,RO4835 LOPRO®,RO4534 LOPRO®,RO4533 LOPRO®,6250,RO4730G3 ED,TC600TM,AD255TM,RT/DUROID 6202PR 0.005",AD250C™,RO3003G2™,RO4360G2,ISOCLAD® 917,CUCLAD 233,RADIX,RT/DUROID® 5880LZ,AD350A,6006,TC600,RO4835™,RO4535 LOPRO,TMM®10,AD300D™-IM™,DICLAD,RO3035,RO4835IND™ LOPRO,KAPPA,RO4000,TMM 13I,AD SERIES,RO4730G3,CLTE SERIES™,MAGTREX® 555,TMM®13I,ISOCLAD,CLTE-XT™,RO3210™,CUCLAD 6700,TMM® 3,RO3206™,RO4350B LOPRO®,ANTEO,RT/DUROID 6202PR 0.020",XTREMESPEED™ RO1200™,TMM 10,RT/DUROID® 5870,TC350™ PLUS,TC350,RO4360G2™,RO3003,RT/DUROID 6010.2 LM,CLTE-MW™,RO3000,CLTE,DICLAD® 880,RO3003G2,588018X12H1/H1R30200+-001DI,RO4350B,AD300TM,CUCLAD 250,RT/DUROID 5870,DICLAD 527,RO4835T,AD255C™,RO3003™,6700,RO4460G2™,DICLAD 880,DICLAD® 527,RT/DUROID 5880LZ,RT/DUROID 6202,RO4835IND,TC350 PLUS,AD350TM,RO4350B™,6202,RO3010,RT/DUROID 6035HTC,RO4450F™,RO4835 LOPRO,AD300D™,RT/DUROID 5880,RT/DUROID 6202PR 0.010",DICLAD 880-IM,AD350,KAPPA 438,DICLAD 870,6202PR,SPEEDWAVE® 300P,ANTEO™,CLTE-XT,RO3006,RO4830™,RO4830,TMM 10I,5880,AD300,AD255-IM,RT/DUROID,TMM 6,TMM 4,TMM®10I,DICLADR 880-IM,RT/DUROID 6010.2LM,TC350 TM,CU4000 LOPRO,RO3203™,ISOCLAD 917,RO4003C™,2929,TC350™,RO4460G2,DICLAD® 870,RO4450F,TMM,CLTE-AT,RO4450T™,TMM®4,AD250,AD250C,TC SERIES,TMM®3,6035HTC,AD255,RO4835,CUCLAD® 217,TMM®6,RO4450T

选型指南  -  ROGERS  - REV. 12/ 2023  - 12/ 2023 PDF 英文 下载

数据手册  -  FUTUREWAY  - V2.0  - 2023/12/25 PDF 中文 下载

Trimmers and Non-Magnetic Components

型号- 6924-12,6924-11,JZ200HV,8093,TP60C,8091,6924-10,8092,TP42CA,A4 SERIES,TM10*,8090,HSF19,HSF34,TT-500,JR300HV,AP25HV,NMNT10-12,HSF46,AJ55HV,A4_3 HV,2322,KG10,9812-SL,A4J5,80H85,A4J3,48-250,17273,5850,5851,9710 SERIES,9710-3SL-1,5600,5601,5602,JR030,KT1SD,48-241,48-242,48-240,HSF64,5862,48-245,48-243,48-244,27285,27283,9810-SL,27284,A_10HV,5852,5853,JR060,27281,48-230,48-231,TP11GA,9702 SERIES,JR200HV,TT-300,48-234,6939-2,48-232,48-233,27294,27295,9820 SERIES,5700 SERIES,27293,27291,48-220,5640,A4M5,5641,5400,5642,A4M3,48-227,48-228,48-225,48-226,48-223,48-224,48-221,TM15C*,TM75C,48-222,27263,27264,27261,6928-6,TM75M,27265,48-229,QP16G,9710-2SL-1,27260,48-216,48-214,48-215,48-212,9822-SL,48-213,TM52C,48-210,48-211,27274,27275,27273,TM52M,5401,5402,A_4HV,KP4HV,27270,27271,JR500HV,A4_5 HV,TP180*,48-205,48-203,TM17G,48-204,48-201,47273-11R5,48-202,2322-1GSL,48-200,JR150HV,QM10,9820-SL,TM18G,6952-2,JR030HV,6952-1,A4P5,A4P3,48-434,S SERIES,48-435,TP21C,48-432,48-433,48-430,TT-100,48-431,5200,6941-1,5201,5202,48-423,48-424,48-421,TP42C,48-422,48-420,JLC07E130TRSM,JLC06E110TRSM,JLC19E375TRSM,QM2G,5451,9810,QM16,9811,5453,TM16D,TM16C,6930-3,6930-5,48-414,KJ10HV,48-415,6930-7,48-412,KT10,48-413,TM16M,48-410,48-411,JZ300HV,5200 SERIES,9821,TP18,JZ100HV,2322 SERIES,9822,TP17,TP16,9820,48-401,48-400,QM SERIES,JR400HV,QM2,9814,TP25,9815,9812,TP23,9813,QM6,TP21,9816,A_20-4,6950-2,TM14C,6950-3,9897-SL,K_HV SERIES,TM38G,TM14M,JLC06E110TRVPC,TM14S,TP14,9826,TP12,TP11,9829,9828,5240,5241,6926-17,5242,TP38,6926-13,9917PC,QM6G,TP3D,2322-3GSL,TM11G,A_HV,NMNT15,TM120,JZ400,TP42,NMNT SERIES,TM36C,TP28,TP90CA,TM12D,L6995-2,TM12G,TM36M,QP2,L6995-1,L6995-0,QP6,TP36,TP30,5500 SERIES,HTM46C,TP28C,TP28D,9898-SL,48-601,TP5G,48-602,48-600,TF14A,TP60,48-603,48-604,HTP96C,TP17GA,TF15A,9828-SL,TF SERIES,JLC02E030TRVPC,TP15C*,47483,KF8,TP4S,TP52,KP4SD,9701-2SL-1,9701-2SL-2,TF36A,TF12A,JZ500HV,9702-0SL-1,AP40HV,TP ERIES,HSM19,47473,KG8,JZ200,9894,9892,9898,9897,KP10,TP6G,6934-3,6934-4,9890,6934-5,9891,6934-6,L6997-0,L6997-2,A1J12,9710-25SL-1,TP28CA,LB1024-1,JR SERIES,TP75,KT4HV,TM10M*,TP9C,6965-1,TP9G,TF10A,TP9S,JR500,HSM34,TP25C,9702-6SL-1,NMNT25-15,55H01,55H02,TF11A,TP8D,TP90,KJ8,HSM46,HTP250C,AJ15HV,27291SL,47275-1R11,9816-SL,9702-1SL-1,TP23C,JZ400HV,QP16GA,9701-1SL-1B,TP23G,TM180M*,LB1026-1,QM10G,HSM64,JLC04E065TRVSM,JZ030,KJ1HV,4010-1,6925-4,6925-5,JR300,9900 SERIES,KM8,A4_5,9814-SL,A4_3,A1_12,9890 SERIES,7054,7059,JR100HV,TM10C*,AP55HV,9701-1SL-2,9701-1SL-1,KT4SD,9701-2PC,HTM64C,TMI5*,7060,A_15HV,7062,9911PC,7061,7064,7063,TP6GA,5600 SERIES,JR_HV,9701-4SL-2,AM15HV,NMNT23-12,9891-SL,9701-4SL-1,27271SL,57285-3,L6997-17,9702-2SL-1,QP10GA,9826-SL,KP6,KP8,TM60C,4012-2,4012-1,TM60M,LB1020-1,JLC07E130TRVPC,57263,9702-4SL-1,57273R5,JR100,JLC03E048TRSM,KJ10,TP30GA,JZ150HV,JZ060,57273,TM180C*,9710-25,JLC03E048TRVSM,JLC05E088TRSM,47285,HTM250C,27283-3R10,9701-0PC,QM16G,HTP210C,A1P12,TF16A,57283,JZ030HV,JLC02E030TRVSM,47273,JLC03E048TRVPC,TP52CA,JLC07E130TRVSM,9701-1,9701-0,KM4HV,9701-2,TT-600,9701-4,TF17A,KT6,KT8,LB1022-1,47273R5,AJ10HV,JR060HV,L6995-22,6929-2,4003-1,48-153,48-151,48-152,48-150,JLC05E088TRVSM,6935-11,6935-12,5700,5701,6935-10,5702,9710-2,48-142,9710-3,48-143,9710-0,48-140,9710-1,48-141,9710-4,9710-5,27281S L,48-144,48-145,QP10,48-131,48-132,48-130,TT-400,48-133,48-134,JR150,48-120,48-121,9894-SL,TP23GA,47285-3,48-124,6927-2,48-125,6927-3,48-122,48-123,QP2G,9912SL-2,KF10,TF6A,48-110,QP16,KF10HV,5750,A4J8HV,5751,5752,KM4SD,2322-0GSL,48-117,48-118,JLC05E088TRVPC,48-115,48-116,48-113,9701-0SL-2,48-114,48-111,TM42C,48-112,9701-4PC,TM42M,5500,5501,TF5A,5502,HTM210C,KJ1SD,48-340,48-341,5760,5761,5762,48-106,48-107,48-104,48-105,48-102,48-344,48-103,48-345,48-100,48-342,48-101,48-343,JLC04E065TRSM,9701-0SL-1,A_55HV,TP90C,48-108,48-109,5753,TF8A,TM6,TM5,NMNT10-6,TM9,48-330,TP12GA,KT10HV,TT-200,48-335,48-333,48-334,48-331,48-332,4014-1,JZ060HV,TP10C*,9811-SL,9701-2SL-1B,6940-1,9918PC,9810 SERIES,48-326,48-327,48-324,48-325,48-322,48-323,48-320,A_HV SERIES,48-321,TM SERIES,QP6G,HTM19C,4007-4,A1J8,A1J4,TP10*,AJ25HV,TP180C*,48-310,L6994-2,5302,TP5,9900,TP6,KP1HV,TP9,TF9A,9821-SL,NMNT23-6,KF4HV,2322-4G,TP30G,48-302,48-300,48-301,TP30C,2322-3G,9914,9911,9702-9SL-1,9912,JR_HV SERIES,9917,9918,JLC04E065TRVPC,TM28D,TM28C,NMNT100-4,TM28M,2322-2GSL,L6316-2,L6316-1,A_10-4,TM25C,9701,A1M8,5800 SERIES,AP15HV,A1M4,QP6GA,TP52C,HSP19,TM25M,4005-1,2322-1G,JZ500,K_HV,9710,L6996-6,NMNT5-18,L6996-5,TP36CA,TP38GA,L6996-1,2322-2G,9702,48-502,48-503,48-500,JLC02E030TRSM,AJ8HV,48-501,9702-8SL-1,TM23G,48-506,9701-4SL-1B,48-505,HSP34,NMNT25-6,A1P8,TP14CA,A1P4,TP75C,2322-0G,A_40HV,9701 SERIES,HSP46,HTM34C,TP16C,TP16D,9914PC,6930-17,KF4SD,TP9GA,JZ300,TP17G,TP17C,NMNT70-6,6933-4,KP10HV,6933-5,JLC06E110TRVSM,2322-4GSL,TM90C,LB1025-2,LB1025-1,9710-0SL-1,HSP64,TM90M,TP14C,TP38G,TM120C,TP38C,JZ SERIES,TM18,9829-SL,TP15*,TP14S,TM28,TM25,TM120M,TM23,TM21,JZ_HV,TP18GA,TP16CA,TF25A,6930-20,6930-21,TM17,TM16,TM14,TM12,TM11,TP36C,TP12C,TP12D,9914SL-2,9912PC,TM3D,TP12G,TF22A,TM42,2

选型指南  -  KNOWLES  - 2024/8/22 PDF 英文 下载

富程威携基于车灯应用的ePTFE防水透气膜与CMD凝露管理器亮相ALE车灯展,赋能车灯凝露管理

在刚刚结束的2024中国国际汽车灯具展览会(ALE)上,富程威推出了基于车灯应用的ePTFE防水透气膜BS-08AL与CMD(凝露管理器)解决方案,旨在通过更高效、更可靠的方式快速实现车灯雾气消散与除湿。

原厂动态    发布时间 : 2024-07-01

Futureway(富程威)氟塑料产品选型指南

描述- 富程威科技有限公司成立于2010年,是一家高分子材料制品国家高新技术企业,以“成为客户身边的材料专家”为核心目标,致力于成为技术领先的高性能氟硅高分学解决方案提供商,产品主要服务于新能源汽车、轨道交通、航空航天、5G通讯与消费电子等领域,为客户提供防尘、绝缘、防油、微波传输、爆破泄压防水透气、耐磨等方面的解决方案。

型号- BS-08AL,LD系列,FA系列,LD-PTFE-LS,BS-08R,FA151,BD-PTFE,BS-06,FA141,FA163,BS-08,FA220,FA166,FD-PTFE,LD-PTFE-CR,BSF-08,BF-08M,BS-08B,SC-PTFE,LD-PTFE

选型指南  -  FUTUREWAY  - 2023/4/28 PDF 中文 下载

Futureway(富程威)防水透气膜产品选型表

富程威防水透气膜是基于富程威科技独特的膨体聚四氟乙烯 (ePTFE) 复合技术所开发,具备防水、防尘、拒油、平衡压差等功能的材料。其耐化学试剂及抗紫外老化性能优异,焊接性、粘接性能好,具有持久保护能力,广泛应用于传感器,医疗器械,通信,消费电子,半导体,LED照明等防水透气应用

产品型号
品类
厚度(mm)
颜色
透气量(@7kPa ml/cm2/min)
耐水压(kPa)
拒油等级
防水防尘等级
阻燃性
工作温度范围(最低)(℃)
工作温度范围(最高)(℃)
爆破压力(kPa)
FW-BF08M-0250
防水透气膜
0.25
黑色
270
>15
6级
IP68
VTM-0
-40
120
30-50kPa

选型表  -  Futureway 立即选型

助力材料创新提速,富程威携有机硅、聚四氟乙烯全系列产品亮相2023国际新材料展!

2023.06.27至29日,以”材料让生活更美好“为主题愿景的2023国际新材料展在深圳国际会展中心盛大举行,作为有机硅、氟材料行业的佼佼者,富程威携有机硅、聚四氟乙烯全系列产品精彩亮相,为满足客户多样化应用需求,提供了专业产品解决方案。

原厂动态    发布时间 : 2023-11-08

富程威携PTFE防水透气膜和凝露管理器解决方案亮相汽车照明产业技术论坛,赋能汽车照明创新发展

2024年8月23日,第二届汽车照明产业技术论坛暨车灯产业价值链展在常州圆满举行。富程威科技与汽车照明行业的众多精英企业携手出席,展示的PTFE防水透气膜和凝露管理器(CMD)解决方案引起了广泛的关注。

原厂动态    发布时间 : 2024-08-30

PTFE薄膜FA系列是线缆绝缘材料首选方案之一

富程威科技多年来专注有机硅、氟塑料基础技术研究与市场应用推广,致力于成为客户身边的材料专家。富程威PTFE薄膜是专为高频高功率低损同轴电缆、航空导线、耐高温导线、数据传输电缆等设计,具有低介电常数、高介电强度、高柔性、高抗拉强度以及可快速弹性恢复等特性的新型材料。

产品    发布时间 : 2023-11-18

FUTUREWAY®BD-PTFE EPTFE With Prolonged Flex Life

Cable jacket protects the shields and conductors from the environment and lends extratensile and flexural strength. Expanded PTFE binder tapes with low friction coefficients let each conductor slide past its neighbors and the outer shield with ease, making cable as a whole more flexible in rotation and torque, and eliminating internal abrasion.

原厂动态    发布时间 : 2023-10-18

富程威科技——车灯压力平衡与凝露控制的解决方案先锋

富程威是一家专注于氟塑料和有机硅高分子新材料技术研发的企业。公司以其专业技术在硅橡胶、聚四氟乙烯(PTFE)防水透气膜及PTFE绕包带的研发和市场开拓方面取得了显著成效。在汽车照明产业技术论坛中,富程威展示公司在车灯压力平衡和凝露控制领域的创新成果,并与业内同行分享研究经验和技术进展。

原厂动态    发布时间 : 2024-08-30

数据手册  -  FUTUREWAY  - V2.0  - 2022/7/12 PDF 中文 下载

展开更多

电子商城

查看更多

品牌:德普福

品类:连接器

价格:

现货: 10,000

品牌:Smiths Interconnect

品类:COUPLER

价格:¥5.8315

现货: 2,727

品牌:Smiths Interconnect

品类:COUPLER

价格:¥15.9934

现货: 1,900

品牌:Smiths Interconnect

品类:COUPLER

价格:¥8.6923

现货: 890

品牌:Smiths Interconnect

品类:COUPLER

价格:¥8.0318

现货: 688

品牌:Smiths Interconnect

品类:COUPLER

价格:¥18.0442

现货: 350

品牌:Smiths Interconnect

品类:COUPLER

价格:¥6.4921

现货: 350

品牌:ROGERS

品类:PTFE/Woven Fiberglass Laminates

价格:¥16,030.1502

现货: 201

品牌:Smiths Interconnect

品类:COUPLER

价格:¥6.6018

现货: 170

品牌:ROGERS

品类:层压板

价格:¥6,312.2201

现货: 140

品牌:

品类:

价格:

现货:

品牌:

品类:

价格:

现货:

品牌:

品类:

价格:

现货:

品牌:

品类:

价格:

现货:

品牌:

品类:

价格:

现货:

品牌:

品类:

价格:

现货:

品牌:

品类:

价格:

现货:

品牌:

品类:

价格:

现货:

现货市场

查看更多

品牌:TAOGLAS

品类:天线

价格:¥220.7568

现货:25

品牌:

品类:

价格:

现货:

服务

查看更多

散热方案设计

使用FloTHERM和Smart CFD软件,提供前期热仿真模拟、结构设计调整建议、中期样品测试和后期生产供应的一站式服务,热仿真技术团队专业指导。

实验室地址: 深圳 提交需求>

防水透气膜模切加工

支持定制透气膜的宽度,ePTFE材质,耐温范围-40℃-260℃,防水等级IP67/IP68,具有疏水性(拒水性)和不粘性。

最小起订量: 1 提交需求>

查看更多

授权代理品牌:接插件及结构件

查看更多

授权代理品牌:部件、组件及配件

查看更多

授权代理品牌:电源及模块

查看更多

授权代理品牌:电子材料

查看更多

授权代理品牌:仪器仪表及测试配组件

查看更多

授权代理品牌:电工工具及材料

查看更多

授权代理品牌:机械电子元件

查看更多

授权代理品牌:加工与定制

世强和原厂的技术专家将在一个工作日内解答,帮助您快速完成研发及采购。
我要提问

954668/400-830-1766(工作日 9:00-18:00)

service@sekorm.com

研发客服
商务客服
服务热线

联系我们

954668/400-830-1766(工作日 9:00-18:00)

service@sekorm.com

投诉与建议

E-mail:claim@sekorm.com

商务合作

E-mail:contact@sekorm.com

收藏
收藏当前页面