The Spring Of Fluoroplastics Is Here?
At present, all countries in the world have set the development of 5G technology as a strategic development goal. With the blessing of 5G, such as "artificial intelligence" and "virtual reality", the calculation and data transmission rate will be greatly improved. With the development of communication technology, the semiconductor industry the rapid development of the chemical industry, electronic chemicals, a new discipline in the chemical industry, also emerged.
Fluorine-containing special gas is one of them. In addition to being used as raw materials, the role of fluoroplastic products in the semiconductor industry is also irreplaceable. Mu’s announcement of a substantial expansion of PFA is worthy of attention. According to the plan, China will officially launch the commercial use of 5G mobile phones in 2020. In 2019, China will issue 5G temporary licenses in several cities to enable large-scale networking in some Cities and hotspots are the first to achieve this, and at the same time accelerate the industrialization process and network construction of the terminal.
The connection cable used for the 5G mobile phone radio frequency coaxial cable is called the 5G mobile phone radio frequency cable, or RF cable for short, as a signal Transmission line connection serves as a bridge for transmission. Product updates are gradually becoming faster with the development of 5G. 5G mobile phones are products for terminal use. RF cables are products used in the early communication infrastructure.
5G mobile phones and RF cables are special The relationship is like the relationship between a car and a road. Only when the road of communication infrastructure is paved can we enter the application of 5G mobile phones and the Internet of Things. 5G radio frequency cables will drive the spring of Fluoroplastics, and we will wait and see.
- |
- +1 赞 0
- 收藏
- 评论 0
本文由逍遥哥哥转载自Futureway News，原文标题为:The Spring Of Fluoroplastics Is Here?，本站所有转载文章系出于传递更多信息之目的，且明确注明来源，不希望被转载的媒体或个人可与我们联系，我们将立即进行删除处理。
相关推荐
Why Do We Use Fluoroplastics?
The excellent performance of fluoroplastics is achieved by the high binding energy between carbon atoms and fluorine atoms.
Application Scenarios of Fluoroplastics in The Cable Industry
Fluoroplastics not only have outstanding electrical insulation, but also have a low dielectric constant and a particularly low loss factor, dielectric strength, dielectric constant (2.3~2.1), and volume resistivity in a wide temperature range and frequency range.
Introduction to the Application of Fluoroplastics in the Cable Industry
At present, in the production of wire and cable, the commonly used fluoroplastics include polytetrafluoroethylene PTFE, polyfluoroethylene propylene (FEP), polyvinylidene fluoride (PVDF), tetrafluoroethylene and ethylene copolymers, etc.
Application of Fluoroplastics in Aerospace Irradiation Cross-linked Wire and Cable
As we all know, fluorine-containing plastics and polyimides are very good wire and cable insulation materials. So far, they have occupied a very important position in aerospace cables.
Why High-rise Buildings Must Use CMP Fire-resistant Cables Mainly Made of Fluoroplastic FEP Insulation?
With the vigorous economic development of various countries in the world, high-rise buildings continue to create new heights. High-rise buildings must use CMP fire-resistant cables mainly made of fluoroplastic FEP insulation.
The Application of PTFE
This article shares about the application of PTFE.
What is Fluoroplastic
Due to the fluorine atom contained in the molecular structure of fluoroplastics, it has many excellent properties, such as excellent electrical insulation, high heat resistance, outstanding oil resistance, solvent resistance and abrasion resistance, good moisture resistance, and low-temperature resistance.
FUTUREWAY®SRL-1140F Battery Pack Sealing Material Meets IP67 Design Requirements
As the core component of a pure electric vehicle, the safety of the battery pack directly affects the safety of the whole vehicle. The battery pack should meet the design requirements of electrical equipment enclosure protection class IP67. So that it could effectively protect the internal components.
Low Loss, Economical Cost-Effective RF Cable JT500, with Signal Transmission Rate up to 76%
The JT500 cable adopts a special structural design and advanced production technology, which enables the cable to have excellent electrical and mechanical performance indicators in the full frequency range, and has a high cost-effectiveness, making it the preferred solution for low loss.
FUTUREWAY® RW系列超高分子量聚乙烯胶带富程威耐磨应用方案
描述- FUTUREWAY® RW系列超高分子量聚乙烯胶带具有低介电常数、可调尺寸稳定性、紧密厚度控制等特点，具备优异的耐磨、抗冲击、自润滑性能，适用于中低温工作环境。产品适用于高压绝缘、导轨、耐磨表层、隔音层等领域，具有耐化学试剂、无卤、可接触食品等特性。
型号- RW-500,RW-100,RW系列,RW-250,RW-160
Low Loss Economical RF Cable JT360L Features Light Weight and Easy Installation
JT360L cable with a diameter of 3.6mm, as a representative type of economical RF cable, has the characteristics of light weight, low cost, easy installation and maintenance, and is widely used in various RF signal transmission systems such as wireless communication, broadcasting, television, radar, and instruments.
【材料】Futureway硅泡棉是动力电池密封的理想选择，保障整个动力电池系统的安全和效率
动力电池密封材料的创新选择动力电池的密封性能对确保其安全和效率至关重要。我们在本文将重点关注电池组密封设计的关键因素，谈谈如何选择最合适的密封材料。常见的密封材料包括聚氨酯、氯丁橡胶、三元乙丙橡胶和硅橡胶，而哪种材料才是动力电池密封的关键之选？密封材料的关键因素：抗压缩永久变形：材料的抗压缩变形能力是指材料承受压缩力并保持相对较小的永久变形的能力。
Futureway（富程威）绝热泡棉产品TIF系列选型表
富程威TIF系列绝热泡棉是采用了新型相变技术开发而成具有超高温（＞600℃）隔热功能的泡棉材料。在低温状态（＜200℃）时，TIF绝热泡棉优异的高弹性、柔性及可压缩性使其具有缓冲，保温，吸收结构公差功能；在超高温时，又可迅速相变隔绝热量扩散，起到优异的隔热作用。TIF绝热泡棉常用于储能单元、动力电池电芯间延缓热失控蔓延
|
产品型号
|
品类
|
厚度（mm）
|
颜色
|
介电强度（kv/mm）
|
阻燃性
|
热导率W/（m.k）
|
工作温度范围（最低）（℃）
|
工作温度范围（最高）（℃）
|
密度（kg/m³）
|
压缩回弹力（25%压缩应力）
|
|
007010100
|
绝热缓冲泡棉
|
1.0
|
黑色
|
7.0
|
UL94-V0
|
0.09
|
-55
|
200
|
430
|
157
|
选型表 - Futureway 立即选型
电子商城
服务
使用FloTHERM和Smart CFD软件，提供前期热仿真模拟、结构设计调整建议、中期样品测试和后期生产供应的一站式服务，热仿真技术团队专业指导。
实验室地址： 深圳 提交需求>
授权代理品牌：集成电路
授权代理品牌：分立元件
授权代理品牌：接插件及结构件
授权代理品牌：部件、组件及配件
授权代理品牌：电源及模块
授权代理品牌：电子材料
授权代理品牌：仪器仪表及测试配组件
授权代理品牌：电工工具及材料
授权代理品牌：机械电子元件
授权代理品牌：加工与定制
我要提问
登录 | 立即注册
提交评论