How to Choose a High-quality Crystal Oscillator?

时间： 2023-11-11 来源：HUIYUAN CRUSTAL News

代理服务

技术支持

现货查询

批量订货

crystal oscillator is also called active crystal oscillator, and the other is called crystal resonator (passive crystal oscillator). The two are collectively called crystal oscillator. In the purchase of crystal oscillators, the purchase requirements of active crystal oscillators and passive crystal oscillators are different. In this article HUIYUAN CRUSTAL will talk about the precautions for purchasing crystal oscillators.

Visual Inspection

By checking the appearance of the product, whether the marking text is clear and standard, whether there are cracks on the surface of the appearance, and whether the pins are soldered. If the product is found to be flawed, it should not be used.

Frequency

The appropriate frequency can be selected according to the product requirements. The frequency is extremely important and cannot be replaced at will. Negotiations are required after passing qualification verification or professional testing. If the frequency required by the actual circuit is 13.56mhz, if there is no source of supply, please do not use it at a similar frequency.

Model

The application of the crystal oscillator must see the model mark of the housing clearly. The model number indicates a number of parameters of the crystal oscillator. According to product requirements, it is necessary to find the model corresponding to the product parameters, and then send the detailed parameter specification to the customer for confirmation before normal delivery. If the crystal oscillator model is not selected properly, it will cause application errors.

Output Mode

When choosing a crystal oscillator, the output type of the crystal oscillator required by the circuit should be considered, which is generally divided into level output and differential output. Level output methods are: CMOS, TTL, HCMOS, CMOS is the most commonly used output type; differential output methods are: LVPECL, LVDS, HCSL, CML, LVPECL, LVDS are commonly used differential output types. Different output types cannot be replaced at will, especially differential and ordinary crystal oscillators.

Substitution Principle

If the crystal oscillator is damaged, in principle, use the original model crystal oscillator to replace it. When there is no original model product, it is best to consider replacing other models or types of crystal oscillators after testing.

发送到邮箱 |
+1 赞 0
收藏
评论 0
| 转发至：

本文由上山打老虎转载自HUIYUAN CRUSTAL News，原文标题为:The crystal oscillator manufacturer tells you how to choose a high-quality crystal oscillator，本站所有转载文章系出于传递更多信息之目的，且明确注明来源，不希望被转载的媒体或个人可与我们联系，我们将立即进行删除处理。

全部评论（0）

暂无评论

How to Distinguish the Pin Direction of the Chip Crystal Oscillator?

Today, more and more electronic devices choose to use small and light chip crystal oscillators, and the use of plug-in crystal oscillators is gradually shrinking. In this article HUIYUAN CRUSTAL will talk about how to distinguish the pin positions of the chip crystal oscillator.

2023-11-08 - 设计经验

Quartz Crystal Storage Standard

The storage standards of crystal oscillators must arouse everyone‘s attention to prevent unnecessary accidents. In this article HUIYUAN CRUSTAL summarized somee common storage problems according to everyone‘s mastery of crystal oscillators.

2023-11-10 - 设计经验代理服务技术支持批量订货

How to Distinguish the Position Direction of SMT Crystal Oscillator?

As more and more electronic devices choose to use small, thin, and thin chip crystal oscillators, the range of applications for plug-in crystal oscillators is decreasing. Today Hui Yuan will discuss with you how to distinguish the position direction of SMT crystal oscillator.

2023-11-09 - 设计经验代理服务技术支持批量订货