How to Distinguish the Position Direction of SMT Crystal Oscillator?

时间： 2023-11-09 来源：HUIYUAN CRUSTAL News

技术问答

选型帮助

研发客服

商务客服

With the rapid development of information technology, miniaturized products are more and more popular. The same is true in the crystal oscillator industry. As more and more electronic devices choose to use small, thin, and thin chip crystal oscillators, the range of applications for plug-in crystal oscillators is decreasing. Today Hui Yuan will discuss with you how to distinguish the position direction of SMT crystal oscillator.

What Is an SMT Crystal Oscillator?

Crystal vibration is one of the components of quartz crystal. Quartz crystal resonators, quartz crystal oscillators, and quartz crystal filters are all quartz crystal components. Quartz crystals are piezoelectric crystals. When a piezoelectric crystal is squeezed or stretched in a particular direction, its two ends generate different charges. According to the different effects, it can be divided into positive piezoelectric effect and negative piezoelectric effect. SMT crystal oscillator is mainly used in the clock module in the circuit to provide the corresponding clock reference, the common application is mainly embedded design, such as FPGA, DSP, and other development boards.

What Is the Difference Between a passive crystal oscillator and an active crystal oscillator?

Common SMT crystal oscillators can be divided into passive and active crystal oscillators. Passive crystal oscillators usually have no direction, but have one pin. How do you distinguish passive crystal oscillators from active crystal oscillator pins?

The 2-pin SMT crystal oscillator must be passive, the 4-pin SMT crystal oscillator must be passive or active, and the 4-pin SMT crystal oscillator must be active.

How to Distinguish the Position Direction of SMT Crystal Oscillator?

Passive crystal oscillators usually have no direction. For four legs, only two are functional feet, with the other two dangling for GND connections. In the case of an active crystal oscillator, the active crystal oscillator is usually imprinted above the direction of the footnote (the lower left corner of the point). Common 4-pin SMT crystal oscillator packages include 1.6 * 1.2mm, 2.0 * 1.6mm, 2.5 * 2.0mm, 3.2 * 2.5mm, 3.0 * 1.5mm, 5.0 * 3.2mm, 7.0 * 5.0mm, etc.

发送到邮箱 |
+1 赞 0
收藏
评论 0
| 转发至：

本文由上山打老虎转载自HUIYUAN CRUSTAL News，原文标题为:How to distinguish the position direction of SMT crystal oscillator?，本站所有转载文章系出于传递更多信息之目的，且明确注明来源，不希望被转载的媒体或个人可与我们联系，我们将立即进行删除处理。

全部评论（0）

暂无评论

Quartz Crystal Storage Standard

The storage standards of crystal oscillators must arouse everyone‘s attention to prevent unnecessary accidents. In this article HUIYUAN CRUSTAL summarized somee common storage problems according to everyone‘s mastery of crystal oscillators.

设计经验发布时间 : 2023-11-10

How to Distinguish the Pin Direction of the Chip Crystal Oscillator?

Today, more and more electronic devices choose to use small and light chip crystal oscillators, and the use of plug-in crystal oscillators is gradually shrinking. In this article HUIYUAN CRUSTAL will talk about how to distinguish the pin positions of the chip crystal oscillator.

设计经验发布时间 : 2023-11-08

What Problems Should Be Paid Attention to in the Use of Chip Crystal Oscillator?

There are many details that need to be paid attention to during installation and use, so that the effect of assembling the oscillator circuit will get better and better. So what are the specific issues that need attention? HUIYUAN CRUSTAL will tell you three points in this article.

设计经验发布时间 : 2023-11-07