What are the Differences in Performance and Applications between Slow Blown Fuses and Fast Blown Fuses?

时间： 2023-11-21 来源：XC News

技术问答

选型帮助

研发客服

商务客服

The main difference between a slow fuse and a fast fuse is its ability to withstand instantaneous pulse current, which means that it can withstand the impact of surge current when switching on and off the machine without action, thus ensuring the normal operation of the equipment. Therefore, the slow fuse is often referred to as surge resistant fuse. From a technical perspective, slow melting fuses have a large melting heat value of I2t, and the energy required for fuse melting is relatively high. Therefore, for fuses with the same rated current, slow melting has a much stronger ability to withstand pulses than fast melting.

Due to the fact that the I2t of a slow fuse is larger than that of a fast fuse of the same specification, the fusing time in the event of overcurrent in the circuit will also be slower than that of a fast fuse. Is it possible that the protection performance may be worse than some people are concerned about? We said no! Because once a circuit malfunctions, the overcurrent will not disappear on its own, and the energy of continuous overcurrent will greatly exceed the I2t of the fuse. No matter what type of fuse is blown, the time difference between slow and fast fusing is not very important for its protection requirements. Slow fusing will only have an impact on the protection performance when there are sensitive components in the protected circuit that need to be protected.

Due to these differences, slow fuse and fast fuse will be applied in different circuits: fast blown fuses must be used in pure resistive circuits (with no or little surge) or circuits that need to protect sensitive and valuable devices such as ICs; The capacitive or inductive circuits (with surges when switching on/off) and the power input/output parts should preferably use slow blown fuses; In addition to protecting the circuits of ICs, most situations where fast fuses are used can switch to slow fuses to improve their anti-interference ability; On the contrary, if a slow blown fuse is used in a place where a fast blown fuse is used, it often leads to the phenomenon of the fuse not working properly when it is turned on.

Fig.1

发送到邮箱 |
+1 赞 0
收藏
评论 0
| 转发至：

本文由三年不鸣转载自XC News，原文标题为:air conditioner fuse block pull-out.What are the differences in performance and applications between slow blown fuses and fast blown fuses?，本站所有转载文章系出于传递更多信息之目的，且明确注明来源，不希望被转载的媒体或个人可与我们联系，我们将立即进行删除处理。

全部评论（0）

暂无评论

Selection of Fuse Type

Select the type of fuse based on the electrical load characteristics in the circuit (slow melting or fast melting fuse). Fuses can be divided into slow fuse and fast fuse according to their different fusing characteristics. Fast melting fuses are commonly used in resistive circuits to protect components that are particularly sensitive to current fluctuations； Slow melting fuses are commonly used to quickly disconnect circuits when there is a fault with a large surge current when the circuit status changes.

设计经验发布时间 : 2024-01-09

Here are Some Practical Tips to Know about Fuses

Due to the fact that fuses are a very common and replaceable component, we believe it is necessary to provide a more in-depth introduction to the purpose, testing, and diagnostic methods of fuses, as well as to showcase various types of fuses and their different shapes and sizes.

设计经验发布时间 : 2023-11-14

Why do Fuses often Open when Turned on or just when the Power is Turned on

Most circuits generate an instantaneous surge current when the power is first connected. In capacitive or inductive circuits, this surge current is often many times, or even dozens of times, greater than the normal steady-state current. If the surge resistance of the fuse used in the circuit is not strong enough, the fuse will be blown off by high-energy surges.

设计经验发布时间 : 2024-01-02

SMD fuse and Chip Fuse Specifications

SMD fuses can be divided into SMD disposable fuses and SMD self recovery fuses. Among them, the specifications of patch disposable fuses include series 060312062410 fuses, and the specifications and dimensions of patch self recovery fuses include series 0603, 0805, 1206, 1210, 1812, 2920, etc.

技术探讨发布时间 : 2023-12-04

5T 系列1A /250V 520玻璃慢断双帽保险管（环保产品）(5T SERIES 1A /250V 520 GLASS SLOW BLOW FUSE(Green Product))

型号- 5F,5T SERIES,5T 系列,026.110020004,5T

数据手册 - 旭程 - REV.1.1 - 2020-10 -28 PDF 中英文下载

4T 系列 2A/250V 3.610 陶瓷慢断双帽保险管（环保产品）产品承认书(4T SERIES 2A/250V 3.610 CERAMIC SLOW BLOW FUSE(GREEN PRODUCT)SPECIFICATION FOR APPROVAL)

型号- 4T SERIES,020.120020034,4T 系列

数据手册 - 旭程 - REV.1.2 - 21.1.7 PDF 中英文下载查看更多版本

6H 系列6.3 A/250V 630陶瓷慢断无脚保险丝（环保产品）（6H SERIES 6.3 A/250 630 CERAMIC SLOW BLOW FUSE(Green Product)）

型号- 6H,6H 系列,6H SERIES,6C SERIES,6C 系列,033.163020004,6C

数据手册 - 旭程 - REV.1.0 - 2021-3-29 PDF 中英文下载

004.1800D0001 12T 系列 8A/24V 1206 贴片慢断保险管（环保产品）产品承认书（004.1800D0001 12T SERIES 8A/24V 1206 SMD SLOW BLOW FUSE(Green Product) SPECIFICATION FOR APPROVAL）

型号- 12T0500,12F,12T0020,12F7000,12T2000,12T2500,004.1800D0001,12T SERIES,12T4500,12F4500,12T6000,12T,12F6500,12F1250,12T4000,12T1250,12F2000,12T8000,12F4000,12F0020,12F2500,12F0500,12F8000,12F6000,12T1000,12T0250,12T3000,12T0010,12T0375,12T1500,12T0012,12T3500,12T0015,12T0750,12F0010,12F1000,12T7000,12F0375,12F0012,12T5000,12F0750,12F0250,12F5000,12F3000,12F1500,12T 系列,12F0015

数据手册 - 旭程 - REV 1.0 - 2020-11-20 PDF 中英文下载

How to Choose a Fuse Correctly?

In today‘s rapidly developing science and technology, fuses are applied in all aspects of people, and the correct selection of fuses is related to the personal and property safety of users! How to choose a fuse correctly?

设计经验发布时间 : 2023-12-19

What are the Types of Glass Tube Fuses

What are the types of Glass Tube Fuses?

技术探讨发布时间 : 2023-11-29

5T 系列 10A/250V 520 玻璃慢断双帽保险管（环保产品）产品承认书（5T SERIES 10A/250V 520 GLASS SLOW BLOW FUSE(Green Product) SPECIFICATION FOR APPROVAL）

型号- 5F,5T SERIES,026.210020009,5T 系列,5T

数据手册 - 旭程 - 版本1.0（REV.1.0） - 20.11.19 PDF 中英文下载查看更多版本

044.2100H0001 BS1362(6B)系列 10A/240V 6B 系列快熔断陶瓷英式插头保险丝（环保产品）产品承认书 (044.2100H0001 BS1362(6B) SERIES 10A/240V 6B Series(Fast/Medium British Plug Top FUSE)(GREEN PRODUCT) SPECIFICATION FOR APPROVAL)

型号- 6B SERIES,6B 系列,BS1362,044.2100H0001

数据手册 - 旭程 - REV.1.0 - 21.12.20 PDF 中英文下载

006.140020003 24T SERIES 4A/250V 24T SMD SLOW BLOW FUSE(Green Product) SPECIFICATION FOR APPROVAL

型号- 24TT5ALA.C.250V,24TT1.6ALA.C.250V,24TT2.5ALA.C.250V,24TT4ALA.C.250V,24TT3.15ALA.C.250V,006.140020003,24TT630MALA.C.250V,24TT6.3ALA.C.250V,24T,24TT1.25ALA.C.250V,24TT1ALA.C.250V,24T SERIES,24TT315MALA.C.250V,24TT400MALA.C.250V,24TT500MALA.C.250V,24TT800MALA.C,250V,24TT250MALA.C.250V

数据手册 - 旭程 - REV. 1.0 - 2023.5.13 PDF 英文下载

24T SERIES 006.131520005 3.15A/250V SMD SLOW BLOW FUSE (Green Product) SPECIFICATION FOR APPROVAL

型号- 24T,006.131520005,24T SERIES

数据手册 - 旭程 - Ver.1.0 - 2021-11-11 PDF 英文下载

Principles for Selecting Fuses

Select the model of the fuse according to the circuit requirements and installation conditions. For circuits with small capacity, choose semi-enclosed or unfilled enclosed. The choice for high short-circuit current is the enclosed type with fillers. Select fast fuses for semiconductor component protection.

技术探讨发布时间 : 2023-11-29