What are the Standard Requirements for Self Restory Fuse Technology?
Self recovery fuse is a type of overcurrent electronic protection component, which is made by mixing conductive particle materials with polymer organic polymers under high pressure, high temperature, and vulcanization reaction conditions, and processed through special processes. What are the standard requirements for self restoring fuse technology? 1. The rated zero power resistance PPTC thermistor should be packaged in different levels according to the zero power resistance, and the resistance range should be indicated on the outer packaging. After the withstand voltage and current resistance tests, the change rate of the resistance before each group of samples is extremely poor δ| After Ri - Before Ri - (After Rj - Before Rj)/Before Rj|
2. The PTC effect refers to a material with a Positive Temperature Coefficient (PTC) effect, which means that the resistance of the material increases with increasing temperature. Most metal materials have the PTC effect. In these materials, the PTC effect is manifested as a linear increase in resistance with increasing temperature, which is commonly referred to as the linear PTC effect.
3. The nonlinear PTC effect is a phenomenon in which the resistance of materials undergoing phase transformation rapidly increases by several to more than ten orders of magnitude along a narrow temperature range, known as the nonlinear PTC effect. Various types of conductive polymers exhibit this effect, such as polymer PTC thermistors. These conductive polymers are very useful for manufacturing overcurrent protection devices.
4. The initial resistance Rmin is tested at an ambient temperature of 25℃ before being installed in the circuit, and the resistance value of the polymer PTC thermistor of the self resetting fuse series.
5. Rmax operates or reflows a self restoring fuse series polymer PTC thermistor at room temperature. The maximum resistance value is measured after one hour of installation in the circuit board.
6. Minimum Resistance (Rmin)/Maximum Resistance (Rmax) At a specified ambient temperature, such as 25℃, the resistance value of a specific model of self restoring fuse series polymer thermistor before installation in the circuit will be within a specified range, that is, between the minimum value (Rmin) and the maximum value (Rmax). This value is listed in the resistance column of the specification.
7. Holding current IHold is the maximum current that can be passed through the polymer PTC thermistor of the self resetting fuse series when it is not in operation. Under limited environmental conditions, the device can be maintained for an infinite period of time without transitioning from a low resistance state to a high resistance state.
8. The minimum steady-state current of the self resetting fuse series polymer thermistor that can operate within a limited time under limited environmental conditions under action current Itrip.
- |
- +1 赞 0
- 收藏
- 评论 0
本文由三年不鸣转载自XC News，原文标题为:fast blow or slow blow fuse for multimeter.What are the standard requirements for self restoring fuse technology?，本站所有转载文章系出于传递更多信息之目的，且明确注明来源，不希望被转载的媒体或个人可与我们联系，我们将立即进行删除处理。
相关推荐
What is A Self Recovery Fuse
Self recovery fuse is an overcurrent electronic protection component that uses a polymer organic polymer under high pressure, high temperature, and sulfurization reaction conditions.After mixing with conductive particle materials, it is processed through a special process. Habitually applying PPTC (Polymer Positive Temperature).
Solution to Fuse Failure
XC shares about Solution to Fuse Failure.
Experience in Selecting Self Recovering Fuses
Do you have any good experience to share in selecting self recovering fuses? Self recovery fuse is an overcurrent electronic protection component, which is made of high molecular weight organic polymers under high voltage, high temperature, and sulfurization reaction conditions, mixed with conductive particle materials, and processed through special processes.
Explanation of Parameters in the PPTC Specification for Self Healing Fuses
This is very simple. As long as you know the meaning represented by the parameters in the specification book, you can clearly and quickly view the PTC specification book for self recovery fuses.
Self Recovery Performance and Working Process of Self Recovery Fuses
Traditional fuses are installed in circuits. When an overcurrent occurs due to a fault or abnormality in the circuit, the fuse itself melts to cut off the current and protect the circuit. However, due to the fact that traditional fuses can only protect once and need to be replaced if burned out, some products still cannot resume operation after troubleshooting or abnormal overcurrent disappears. As a new type of overcurrent protection device, the self-recovery fuse has the function of automatic recovery, which can meet the performance requirements of similar applications.
Principle and Characteristics of Self Recovering Fuses
As a new type of overcurrent protection component, self recovering fuses have the advantages of self recovery, fast response speed, and small size, and have broad application prospects in electronic devices and circuits.
The Application of Self Recovery Fuses in RS485 Interface
As is well known, the interface of intelligent instruments was originally RS232, which can achieve point-to-point communication, but this method cannot achieve networking function. The subsequent RS485 resolved this issue. So the current RS485 interface is quite popular among intelligent instruments. Today, the editor will explain the application of self recovery fuses in the RS485 interface.
Self Healing Fuses, a New Type of Overcurrent Protection Component
Self recovery fuse is a new type of overcurrent protection component with unique performance and wide application prospects.
The Operating Principle of Self Recovering Fuse PPTC in USB Protection
Self healing fuse (PPTC) is a very important electronic component widely used in the protection of USB interfaces. It has the characteristics of automatic protection and automatic recovery. When the current exceeds the set value, the circuit will be immediately cut off, and when the current returns to the normal range, the path will be automatically restored.
The Selection of Miniature Fuses
Miniature fuses are primarily used in digital cameras, laptops, mobile phones, and other electronic products. From traditional glass tube fuses to miniature fuses, the selection focus varies slightly due to differences in product technology. The selection of miniature fuses involves the following elements.
The Difference between Self Recovery Fuse and Blown Fuse
What is the difference between a self restoring fuse and a blown fuse? It is inevitable to have a clear understanding of the functions, parameters, and differences between them. So, let‘s experience the charm of self recovery fuses and blown fuses.
Briefly describe the application field and protective effect of self recovery fuses in automobiles
With the continuous development of China‘s economy, cars have become an essential means of transportation for people‘s travel. With the increasing number of urban cars, the application of the fuse industry in the automotive field is also becoming more and more widespread. Currently, 40% of cars use various electronic devices. So where do we need to provide over temperature/over voltage/over current protection, and what devices should be used for correct protection? This issue requires us to have a deeper understanding.
Self Recovery Fuse Specification, Must Understand
Each type of circuit protection component has specifications, and self recovery fuses are no exception. So, what do you think when holding a self-healing fuse specification book? To put it bluntly, when reading the specifications, the main focus is on the parameters and the meanings they represent.
Self Recovery Fuse on Mobile Power PCB Board
The mobile power supply consists of overcurrent protection devices, batteries, and control charging and discharging circuits. The previous charging and discharging circuits used ICs for overcurrent protection, which were complex, had high failure rates, and high costs. Some users returned or repaired the circuit, and the manufacturer was fined and claimed compensation, which caused great trouble for manufacturers and designers. The above problems must be solved in order to promote their application.
Self Recovery Fuse for Overheat Protection in Circuits
Self restoring fuses can respond to temperature increases caused by external heat and internal current, and establish thermal connections with high-voltage equipment to provide overheating protection. Establishing this thermal connection can be achieved by arranging these devices in contact with or near high-voltage equipment.
电子商城
授权代理品牌：集成电路
授权代理品牌：分立元件
授权代理品牌：接插件及结构件
授权代理品牌：部件、组件及配件
授权代理品牌：电源及模块
授权代理品牌：电子材料
授权代理品牌：仪器仪表及测试配组件
授权代理品牌：电工工具及材料
授权代理品牌：机械电子元件
授权代理品牌：加工与定制
我要提问
登录 | 立即注册
提交评论