Professional Knowledge of Self-healing Fuses
The operating principle of a self-healing fuse is a dynamic balance of energy. The current flowing through the self-healing fuse generates a certain amount of heat due to the thermal effect of the current (self-healing fuses all have resistance values), and the generated heat is completely or partially dissipated into the environment. The heat that is not dissipated will increase the temperature of the self-healing fuse components. The temperature during normal operation is relatively low, and the heat generated and dissipated reaches a balance.
The self-healing fuse element is in a low resistance state, and the self-healing fuse does not operate. When the current flowing through the self-healing fuse element increases or the ambient temperature increases, but if the balance between the generated heat and the emitted heat is reached, the self-healing fuse still does not operate. When the current or ambient temperature increases again, the self-healing fuse will reach a higher temperature. If the current or ambient temperature continues to increase at this point, the heat generated will be greater than the heat dissipated, causing a sudden increase in the temperature of the self-healing fuse element.
At this stage, a small temperature change will cause a significant increase in resistance. At this point, the self-healing fuse element is in a high resistance protection state, and the increase in impedance limits the current. The current drops sharply in a short period of time, thus protecting the circuit equipment from damage, As long as the heat generated by the applied voltage is sufficient to dissipate the heat from the self-healing fuse element, the self-healing fuse element in a changing state can remain in operation (high resistance). When the applied voltage disappears, the self recovery fuse can automatically recover.
Fig.1
- |
- +1 赞 0
- 收藏
- 评论 0
本文由三年不鸣转载自XC News,原文标题为:temperature regulating mattress protector.Professional knowledge of self restoring fuses,本站所有转载文章系出于传递更多信息之目的,且明确注明来源,不希望被转载的媒体或个人可与我们联系,我们将立即进行删除处理。
相关推荐
Self Recovery Fuse Specification, Must Understand
Each type of circuit protection component has specifications, and self recovery fuses are no exception. So, what do you think when holding a self-healing fuse specification book? To put it bluntly, when reading the specifications, the main focus is on the parameters and the meanings they represent.
技术探讨 发布时间 : 2023-12-02
Description of Metal Materials for Self Recovering Fuses
PPTC self-healing fuses play a role in limiting current and achieving circuit protection. There are various specifications and models of self-healing fuses. This article introduces the metal materials used for Self Recovering Fuses.
技术探讨 发布时间 : 2024-09-10
【技术】一文带你正确认识保险丝的熔断特性及熔化热能值
文章由旭程电子带各位工程师正确认识保险丝的熔断特性及熔化热能值。熔断特性即电流保险丝所加负载电流与保险丝熔断时间的关系,熔化热能值(I2T)是指使保险丝的熔断体熔化,部份汽化的切断电流所需要的公称能量值,简单说就是使保险丝熔断所需的最小热能值。
技术探讨 发布时间 : 2021-11-05
Experience in Selecting Self Recovering Fuses
Do you have any good experience to share in selecting self recovering fuses? Self recovery fuse is an overcurrent electronic protection component, which is made of high molecular weight organic polymers under high voltage, high temperature, and sulfurization reaction conditions, mixed with conductive particle materials, and processed through special processes.
设计经验 发布时间 : 2024-08-16
【经验】一文带你了解保险丝的熔断时间
保险丝的熔断时间能比较直观的反应保险丝保护性能的好坏,它是保险丝的一个重要参数,实际的熔断时间分为预飞弧时间和飞弧时间,在数据上用I-t曲线和I-t表格来体现,也叫熔断特性或安秒特性,本文旭程带你解析保险丝的熔断时间。
设计经验 发布时间 : 2021-12-21
Is the Fuse Lead or Tin
The material of fuses is usually not simply lead or tin, but alloys of various components such as lead tin alloys.
技术探讨 发布时间 : 2024-09-20
旭程保险丝选型表
提供旭程保险丝选型,操作温度-40℃至+125℃,额定电流涵盖250mA-20A,额定电压250VAC或63VDC。产品均符合RoHS、REACH法规要求,尺寸规格涵盖广。
产品型号
|
品类
|
Current Rating(额定电流:mA/A)
|
Voltage Rating(额定电压:VAC)
|
Interrupting Rating(断续额定:A)
|
应用等级(工业级/商业级/汽车级/军工级/航空航天级)
|
形状材质
|
等级认证标准
|
快慢断
|
有无带脚
|
工作温度范围(最低:℃)
|
工作温度范围(最高:℃)
|
尺寸(mm)
|
018.025020008
|
保险丝
|
250mA
|
250VAC
|
50A
|
工业级
|
玻璃管
|
IEC60127
|
慢断
|
带脚
|
-40℃
|
125℃
|
3.6*10mm
|
选型表 - 旭程 立即选型
旭程(XC)温控器选型指南
目录- 公司介绍 Company Profile 温控器 Thermostat 保险丝 Fuses 企业资质与专利 Qualification and Patents Certifications
型号- C0015302Z,9K7.SK-B5,KSD305系列,9K7.SK-B3,CG-B,CG-A,SK-B1系列,9K7CG-XXX,SK-B5系列,KSD301系列,KSD307B,SK-A1,KSD307 SERIES,SK-A4,C0015301Z,9K7.SK-C2,SK-C2系列,C0025302Z,C4000302Z,KT SERIES,9K7.JW-A072,C2000302Z,CG-B系列,C0080303Z,9K7.SK-B11,JW-C系列,KSD305B,JW,KSD305-XXXX/XXXX,SK-C2,9K7SK-XXXX/XXXXX,C4000301Z,C5000301Z,SK,CG SERIES,9K4307-XXXX/XXXX,C0020302Z,CG,KT,KSD9700 SERIES,SK-B1,C5000302Z,C1000302Z,C0050303Z,SK-B5,C0035302Z,C0020303Z,C0040302Z,KSD307系列,KSD301-XXX/XXXXXX/XXX,9K7KT-XXXX/XXXXX,9K7.SK-F3,SK-F5系列,JW-B系列,C0060303Z,KSD9700,C0030301Z,KT系列,C7500301Z,C0070303Z,C0040303Z,SK-A1系列,9K9.9700-XXXXXXX,KSD305,KSD307,KT-A2,KT-A1,KSD301,C0030302Z,JW SERIES,JW系列,C0020301Z,C7500302Z,C0010302Z,9K4.307B,JW-A系列,CG-A1,C0025301Z,CG系列,KSD9700系列,C3000301Z,C2000301Z,C0030303Z,KT-A系列,SK SERIES,JW-B,JW-C,SK系列,KSD301 SERIES,KSD305 SERIES,CG-B2,C0010301Z,SK-F5,C3000302Z,SK-F6,9K7JW-XXXX,CG-A系列,KSD307-XXXX/XXXX,KT-A,9K4.307
Fuse Material Has A Decisive Impact on Its Performance
Fuses are generally made of silver copper alloy with high resistivity and low melting point. This alloy has good conductivity and melting characteristics, which can quickly melt when the current is too high, thus protecting the circuit. Early fuses were often made of lead antimony alloy, but due to safety reasons, this material has been phased out.
技术探讨 发布时间 : 2024-08-23
旭程(XC)保险丝选型指南
目录- Company Profile Fuse User's Manual Fuse Auto Fuse Fuse Holder Thermostat
型号- 06F,3S,C0015302Z,C0040302Z,3T,10C,06T,C0060303Z,4F,KSD9700,C0030301Z,6CH,C7500301Z,4T,C0015301Z,C0070303Z,4TE,C0040303Z,8TE,C0025302Z,5C,KSD305,5F,5G,C4000302Z,5H,9L,KSD301,C2000302Z,C0030302Z,10FV,C0020301Z,5S,C7500302Z,5T,C0010302Z,24F,12F,32F,C0080303Z,5SH,6B,6C,C0025301Z,6F,6G,24T,6H,12T,C3000301Z,C4000301Z,C5000301Z,2F,C2000301Z,C0030303Z,32T,R3-13,5GH,R3-12,R3-11,5CH,6S,C0020302Z,6T,2T,5TE,XC-1,BS1362,C0010301Z,C3000302Z,5TR,3F,3G,C5000302Z,C1000302Z,XC-2,C0050303Z,C0035302Z,C0020303Z
What is the Reason Why the Fuse Keeps Burning Out?
Using a fuse that is too small can easily burn out and cause power outages, while using one that is too large may cause damage to electrical equipment. So for safety reasons, to ensure the “safety“ of the fuse, the following points should be noted.
设计经验 发布时间 : 2024-08-13
【电气】旭程推出17C系列工业保护熔断器,迈出工业领域产品系列开发和转型升级的关键一步
旭程17C系列熔断器主要为带端脚产品,适用于端子插件,其本体尺寸47±1.5mm,带端脚尺寸76.6±2mm,产品符合ROHS、REACH、无卤等环保要求。推荐料号:061.2400G0001、061.2630G0001、061.3100G0001。
产品 发布时间 : 2023-10-13
【技术】一文介绍电阻式保险丝快熔断与慢熔断的区别
在上一期文章当中我们向大家介绍了旭程2F系列电阻式快熔断保险丝,而除此之外,旭程同样推出了2T系列电阻式慢熔断保险丝,其本体的尺寸为2.7*7.3mm、额定电压125V/250V,额定电流250mA-10A,工作温度-40℃~125℃。
技术探讨 发布时间 : 2023-08-01
熔断器两端的材料都有什么?
熔断器两端的材料都有什么?本文中旭程来给大家介绍一二,希望对各位工程师有所帮助。熔断器两端的材料主要包括铜和铜合金,这是因为铜及其合金具有一系列适合熔断器应用的特性。
技术探讨 发布时间 : 2024-05-29
电子商城
登录 | 立即注册
提交评论