Kinetic Technologies Simplifies USB Type-C Dual Role Port Design with 5A/100W, Power Delivery Protection Switch KTS1865 with Single-Path Sink/Source Capability
Power management and video/audio interface IC leader Kinetic Technologies announced the industry's first integrated USB Type-C Power Delivery Protection Switch that simplifies and shrinks existing discrete designs in Dual Role Port applications(DRP applications) ; a crucial feature in today's flagship notebook computers and docking stations. By integrating a bidirectional, reverse-blocking "ideal diode," low resistance MOSFET switch, and multiple sensing and protection features, the KTS1865 can reduce board space, minimize the bill-of-materials (BOM), and enhance system reliability by helping to enable robust protection against abnormal operating conditions.
"The KTS1865 is a device at the forefront of protection switches that can finally allow designers to simplify their Dual Role Port designs, and at the same time, can provide a reliable, cost-effective, and robust solution," said Erik Ogren, Kinetic Technologies' Senior Director of Marketing. "In existing designs, customers must often use one current sink and one current source device per port. When the USB port is in sink mode, the source device is not needed, and vice versa. Kinetic designers using our industry leading IP for both sink and source switches have combined both functions into a single switch without compromise. Customers appreciate the lower component count and the space savings this can provide."
The KTS1865 is a low resistance, high-current, bidirectional load switch optimized to protect USB Type-C Power Delivery (PD) ports that sink and/or source up to 100W at 20V, while at the same time withstand 29V on VBUS. Mode control is provided by two logic pins that enable or disable the switch, while also setting the device into either SINK or SOURCE mode. Slew-rate controlled turn-on with current limiting is designed to prevent excessive large in-rush currents while maintaining Fast Role Swap (FRS) capability. Operating from an input voltage range of 3V to 23V, the KTS1865 integrates a port-side TVS for IEC surge and ESD Level 4 protection. It also includes several additional protection features including overvoltage protection, "ideal diode" reverse current protection with fast recovery, over-current protection, programmable current limit, and over-temperature protection. The "ideal diode" reverse current protection is also bidirectional and automatically oriented to match the switch's logic-controlled sink or source mode, making it possible for two or more charging ports in a "power OR" configuration to be connected to a single charger without back-feeding the lower voltage input source.
The single-path sink/source switch architecture of the KTS1865 is particularly well suited to meet the system design challenges in docking stations, conferencing systems, and charger-per-port fnotebook computers.
Packaged in a small 2.64 x 2.14mm, 20-bump Wafer-Level Chip-Scale Package (WLCSP).
Key Product Highlights:
● 3V to 23V Operating Voltage Range
● 29V Abs. Max. Rating at VBUS and VSYS
● 5ARMS Continuous Current Rating
● 20mΩ typ. On-Resistance from VBUS to VSYS
● Transient Voltage Suppression (TVS) at VBUS
±100V Surge Protection (IEC61000-4-5)
±8kV Contact and ±15kV Air-Gap ESD (IEC61000-4-2)
● Soft-Start (SS) Limits Inrush Current
Fast SS for Fast Role Swap (FRS)
● Over-Voltage Protection (OVP) at VBUS and VSYS
23V Internally Fixed with Adj. 4V to 23V Resistor Programmable
● "Ideal Diode" Bidirectional Reverse-Current Protection (RCP)
RCP 15μs Fast Recovery without FLT Indication
● Short-Circuit Protection (SCP) at VBUS and VSYS
● Over-Current Protection (OCP) in ISINK Mode
● Current-Limit Protection (CLP) in ISOURCE Mode
Resistor Adjustable from 0.6A to 5.5A
● Over-Temperature Protection (OTP)
● POK Safe LDO provides 3.3V/100mA
● EN1/2 Logic Polarity Options
● FLT Open-Drain Output Flag
● Auto-Retry Hiccup Operation after All Faults
● 20-bump WLCSP 2.64 x 2.14mm (0.5mm pitch)
- |
- +1 赞 0
- 收藏
- 评论 0
本文由Vicky转载自Kinetic Technologies News,原文标题为:Kinetic Technologies Simplifies USB Type-C Dual Role Port Design with the Industry’s First 5A/100W, Power Delivery Protection Switch with Single-Path Sink/Source Capability,本站所有转载文章系出于传递更多信息之目的,且明确注明来源,不希望被转载的媒体或个人可与我们联系,我们将立即进行删除处理。
相关推荐
【元件】业界首款5A/100W USB PD保护开关,简化USB Type-C DRP端口设计
芯凯电子宣布发布业界首款高集成度的USB Type-C PD保护开关,该开关可大大简化应用在当今笔记本电脑和扩展坞的DRP分立设计方案。KTS1865集成双向、反向阻断的“理想二极管”、低电阻MOSFET开关以及多种传感和保护功能,可以有效减小电路板空间,最大限度地减少材料清单(BOM)
Kinetic Technologies’ Low RON Load Switch KTS1677A Isolates and Protects Against Abnormal Voltage and Current Conditions
Kinetic Technologies has announced a new addition to their ever-growing power protection solutions with the KTS1677A. This innovative protection device has been designed to isolate and protect against abnormal voltage and current conditions through a slew-rate controlled, reverse-blocking, 30mΩ, low-resistance MOSFET switch.
Kinetic Technologies Lowest Resistance USB Current-Sink Protection Switch KTS1696A Enabling Power Delivery up to 140W
Kinetic Technologies has announced the highest power addition to its comprehensive range of power protection solutions with the KTS1696A. This robust protection device has been designed to isolate and protect against abnormal voltage and current conditions through a slew-rate controlled, reverse-blocking, 11mΩ, low-resistance MOSFET switch in a tiny 2.7×2.7mm 25-bump WLCSP package.“
带标志的JW7115SX/JW7111SX单电源开关
描述- 该资料介绍了JW7115Sx/JW7111Sx单通道电源开关的特点和应用。它适用于通用串行总线(USB)和其他热插拔应用,具有精确的电流限制功能,提供反向电流阻断、过流保护和热保护等功能。
型号- JW7111SX,JW7115SX,JW®7115SX
JW7115系列/JW7111 50mΩ带标志的单电源开关
描述- 该资料介绍了JW7115系列和JW7111两款单通道电流限制电源开关。这些器件适用于通用串行总线(USB)和其他FLG应用的主动低热插拔功能。它们具有精确的电流限制、快速短路响应时间、内置软启动功能和多种保护措施,如过流保护、过温保护和短路保护。此外,还提供了故障报告功能,并支持多种封装类型。
型号- JW7115,JW7111
KTS1673 5ARMS VBUS吸电流保护负荷开关
描述- KTS1673是一款低电阻、高电流负载开关,具有软启动、过压保护、反向电流阻断、过流保护、短路保护和过温保护等功能。适用于USB Type-C PD端口和需要承受高达29V VBUS电压的电池充电器。
型号- KTS1673DEGAE-TA,KTS1673BEGAE-TA,KTS1673CEGAE-TA,KTS1673B,KTS1673A,KTS1673,KTS1673D,KTS1673C,KTS1673AEGAE-TA
JW7105B限流可编程USB开关
描述- JW7105B是一款专为需要精确电流限制或提供高达3.3A连续负载电流的应用优化的USB开关。它具有可编程的电流限制阈值(550mA至2.4A),快速短路响应时间,内置软启动和过温保护功能,适用于多种电子设备。
型号- JW7105B
KTS1672 5ARMS VBUS吸电流保护负荷开关
描述- KTS1672是一款低电阻、高电流的负载开关,具有软启动、过压保护、反向电流阻断、过流保护、短路保护和过温保护等功能。它适用于USB Type-C PD端口和需要承受高达29V VBUS电压的巴伦连接器,以保护系统免受高达100W的电流和电压冲击。
型号- KTS1672BEGAE-TA,KTS1672,KTS1672AEGAE-TA
KTS1696A 7Arms VBUS吸电流保护负荷开关
描述- KTS1696A是一款低电阻、高电流负载开关,具备软启动、过压保护、“理想二极管”反向电流保护、短路保护、过流保护和过温保护等功能。它适用于USB Type-C PD端口和电源插孔,可承受高达140W的功率消耗,并能在VBUS上承受最高29V的电压。
型号- KTS1696A,KTS1696AEOAB-TR
用于28V EPR系统的KTS1898 6ARMS VBUS iSINK负载开关
描述- 该资料介绍了KTS1898是一款适用于28V EPR系统的USB VBUS安全管理系统负载开关。它具有宽电压范围(3V至32V)、高电流承载能力(6A连续电流),并具备多种保护功能,如过压保护、短路保护和过温保护等。此外,KTS1898采用先进的25-bump WLCSP封装。
型号- KTS1898B,KTS1898,KTS1898A,KTS1898BEOAE-TA,KTS1898AEOAE-TA
KTS1670可调过压保护开关
描述- KTS1670是一款可调过压保护开关,具备宽输入电压范围、高电流能力、集成N通道MOSFET等特点,适用于智能手机、移动互联网设备、平板电脑等低电压系统,以防止电压故障造成的损坏。
型号- KTS1670EDA-TR,KTS1670EUN-TR,KTS1670
KTS1697A规格书简介:7ARMS VBUS吸电流保护负载开关
描述- 该资料简要介绍了KTS1697A是一款低电阻、高电流负载开关,具备软启动、过压保护、“理想二极管”反向电流保护、短路保护、过流保护和过温保护等功能。它适用于USB Type-C PD端口和电源插头座,可承受高达140W的功率消耗,并能在VBUS上承受最高29V的电压。该产品采用先进的绿色合规25-bump Wafer-Level Chip-Scale Package(WLCSP)封装。
型号- KTS1697A,KTS1697AEOAB-TR
KTS1661 USB VBUS 2.5A带限流功能的理想二极管负载开关
描述- 该资料介绍了KTS1661是一款低电阻的理想二极管负载开关,具有可调电流限制、软启动和理想二极管反向电流保护功能。它适用于USB-C端口系统,可在5V电压下提供高达15W的电源,并能在VBUS上承受高达29V的电压。KTS1661通过外部电阻设置从500mA到2.5A的可调电流限制。
型号- KTS1661ECAC-TA,KTS1661
KTS1665 USB VBUS 3.3A带限流功能的理想二极管负载开关
描述- 该资料介绍了KTS1665是一款低电阻的理想二极管负载开关,具有可调电流限制保护、软启动和理想二极管反向电流保护功能。它适用于USB-C端口系统,可在5V电压下提供高达15W的电源,并能在VBUS上承受高达29V的电压。该产品具备多种保护功能,如过流保护、短路保护和过温保护,适用于智能手机、平板电脑、游戏机、笔记本电脑、台式PC等多种设备。
型号- KTS1665ECAC-TA,KTS1665
JW7105/JW7105A限流可编程USB开关
描述- 该资料介绍了JW7105/JW7105A电流限制可编程USB开关的特点和应用。这些器件适用于需要精确电流限制或提供高达2.4A连续负载电流的应用,具有可编程的550mA至2.4A(典型值)电流限制阈值,并具备快速短路响应时间、内置软启动功能和过温保护。
型号- JW7105A,JW7105
电子商城
现货市场
品牌:SILICON LABS
品类:Switch Hall Effect Magnetic Position Sensor
价格:¥2.2924
现货:126,000
登录 | 立即注册
提交评论