Kinetic Technologies Simplifies USB Type-C Dual Role Port Design with 5A/100W, Power Delivery Protection Switch KTS1865 with Single-Path Sink/Source Capability
Power management and video/audio interface IC leader Kinetic Technologies announced the industry's first integrated USB Type-C Power Delivery Protection Switch that simplifies and shrinks existing discrete designs in Dual Role Port applications(DRP applications) ; a crucial feature in today's flagship notebook computers and docking stations. By integrating a bidirectional, reverse-blocking "ideal diode," low resistance MOSFET switch, and multiple sensing and protection features, the KTS1865 can reduce board space, minimize the bill-of-materials (BOM), and enhance system reliability by helping to enable robust protection against abnormal operating conditions.
"The KTS1865 is a device at the forefront of protection switches that can finally allow designers to simplify their Dual Role Port designs, and at the same time, can provide a reliable, cost-effective, and robust solution," said Erik Ogren, Kinetic Technologies' Senior Director of Marketing. "In existing designs, customers must often use one current sink and one current source device per port. When the USB port is in sink mode, the source device is not needed, and vice versa. Kinetic designers using our industry leading IP for both sink and source switches have combined both functions into a single switch without compromise. Customers appreciate the lower component count and the space savings this can provide."
The KTS1865 is a low resistance, high-current, bidirectional load switch optimized to protect USB Type-C Power Delivery (PD) ports that sink and/or source up to 100W at 20V, while at the same time withstand 29V on VBUS. Mode control is provided by two logic pins that enable or disable the switch, while also setting the device into either SINK or SOURCE mode. Slew-rate controlled turn-on with current limiting is designed to prevent excessive large in-rush currents while maintaining Fast Role Swap (FRS) capability. Operating from an input voltage range of 3V to 23V, the KTS1865 integrates a port-side TVS for IEC surge and ESD Level 4 protection. It also includes several additional protection features including overvoltage protection, "ideal diode" reverse current protection with fast recovery, over-current protection, programmable current limit, and over-temperature protection. The "ideal diode" reverse current protection is also bidirectional and automatically oriented to match the switch's logic-controlled sink or source mode, making it possible for two or more charging ports in a "power OR" configuration to be connected to a single charger without back-feeding the lower voltage input source.
The single-path sink/source switch architecture of the KTS1865 is particularly well suited to meet the system design challenges in docking stations, conferencing systems, and charger-per-port fnotebook computers.
Packaged in a small 2.64 x 2.14mm, 20-bump Wafer-Level Chip-Scale Package (WLCSP).
Key Product Highlights:
● 3V to 23V Operating Voltage Range
● 29V Abs. Max. Rating at VBUS and VSYS
● 5ARMS Continuous Current Rating
● 20mΩ typ. On-Resistance from VBUS to VSYS
● Transient Voltage Suppression (TVS) at VBUS
±100V Surge Protection (IEC61000-4-5)
±8kV Contact and ±15kV Air-Gap ESD (IEC61000-4-2)
● Soft-Start (SS) Limits Inrush Current
Fast SS for Fast Role Swap (FRS)
● Over-Voltage Protection (OVP) at VBUS and VSYS
23V Internally Fixed with Adj. 4V to 23V Resistor Programmable
● "Ideal Diode" Bidirectional Reverse-Current Protection (RCP)
RCP 15μs Fast Recovery without FLT Indication
● Short-Circuit Protection (SCP) at VBUS and VSYS
● Over-Current Protection (OCP) in ISINK Mode
● Current-Limit Protection (CLP) in ISOURCE Mode
Resistor Adjustable from 0.6A to 5.5A
● Over-Temperature Protection (OTP)
● POK Safe LDO provides 3.3V/100mA
● EN1/2 Logic Polarity Options
● FLT Open-Drain Output Flag
● Auto-Retry Hiccup Operation after All Faults
● 20-bump WLCSP 2.64 x 2.14mm (0.5mm pitch)
- |
- +1 赞 0
- 收藏
- 评论 0
本文由Vicky转载自Kinetic Technologies News,原文标题为:Kinetic Technologies Simplifies USB Type-C Dual Role Port Design with the Industry’s First 5A/100W, Power Delivery Protection Switch with Single-Path Sink/Source Capability,本站所有转载文章系出于传递更多信息之目的,且明确注明来源,不希望被转载的媒体或个人可与我们联系,我们将立即进行删除处理。
相关推荐
【元件】业界首款5A/100W USB PD保护开关,简化USB Type-C DRP端口设计
芯凯电子宣布发布业界首款高集成度的USB Type-C PD保护开关,该开关可大大简化应用在当今笔记本电脑和扩展坞的DRP分立设计方案。KTS1865集成双向、反向阻断的“理想二极管”、低电阻MOSFET开关以及多种传感和保护功能,可以有效减小电路板空间,最大限度地减少材料清单(BOM)
Kinetic Technologies’ Low RON Load Switch KTS1677A Isolates and Protects Against Abnormal Voltage and Current Conditions
Kinetic Technologies has announced a new addition to their ever-growing power protection solutions with the KTS1677A. This innovative protection device has been designed to isolate and protect against abnormal voltage and current conditions through a slew-rate controlled, reverse-blocking, 30mΩ, low-resistance MOSFET switch.
Kinetic Technologies Lowest Resistance USB Current-Sink Protection Switch KTS1696A Enabling Power Delivery up to 140W
Kinetic Technologies has announced the highest power addition to its comprehensive range of power protection solutions with the KTS1696A. This robust protection device has been designed to isolate and protect against abnormal voltage and current conditions through a slew-rate controlled, reverse-blocking, 11mΩ, low-resistance MOSFET switch in a tiny 2.7×2.7mm 25-bump WLCSP package.“
KTS1673 5ARMS VBUS Current-Sink Protection Load Switch
型号- KTS1673DEGAE-TA,KTS1673BEGAE-TA,KTS1673CEGAE-TA,KTS1673B,KTS1673A,KTS1673,KTS1673D,KTS1673C,KTS1673AEGAE-TA
KTS1898 6ARMS VBUS ISINK Load Switch for 28V EPR Systems
型号- KTS1898B,KTS1898,KTS1898A,KTS1898BEOAE-TA,KTS1898AEOAE-TA
KTS1697A Datasheet Brief:7ARMS VBUS Current-Sink Protection Load Switch
型号- KTS1697A,KTS1697AEOAB-TR
电子商城
现货市场
品牌:SILICON LABS
品类:Switch Hall Effect Magnetic Position Sensor
价格:¥2.2924
现货:126,000
登录 | 立即注册
提交评论