Application of Thermal Conductive Materials in Charging Piles
In order to meet the effect of reaching full charge in the lowest time, the power of charging piles is often much greater than other charging equipment, especially some fast charging charging piles. Under normal circumstances, when the mobile phone is charging, the charger will heat up, not to mention the large size. "Charger", because the higher the power, the higher the heat it emits, so timely heat dissipation is a problem that the charging pile must solve.
Heating of machinery and equipment is an important factor affecting its performance and reliability. If the heating of machinery and equipment is serious, it may cause the machinery and equipment to short-circuit and crash, or even burn out due to overload. In order to effectively control the heat, it is generally installed on the surface of the heat source. The heat sink or the heat sink, so that the heat can be guided to the outside in time, and if the heat sink is installed directly, the heat dissipation effect is not ideal.
There is a gap between the heat source and the radiator, and even two smooth and flat surfaces cannot be avoided. The presence of air in the gap causes the efficiency of heat transfer to decrease, which affects the heat dissipation effect. In order to effectively control the temperature and improve the heat transfer efficiency, in general, the thermal conductive materials is filled between the radiator and the heat source, the gap between the two is completely filled, the air in the gap is removed, the contact thermal resistance is reduced, and the heat transfer efficiency is improved. Ensure that the charging pile can run for a long time.
- |
- +1 赞 0
- 收藏
- 评论 0
本文由会飞的猪猪转载自SHEEN News，原文标题为:Application of thermal conductive materials in charging piles，本站所有转载文章系出于传递更多信息之目的，且明确注明来源，不希望被转载的媒体或个人可与我们联系，我们将立即进行删除处理。
相关推荐
What is a thermally conductive silicone sheet?
A thermally conductive silicone sheet is one of many thermally conductive materials. A thermally conductive silicone sheet is a gap-filling gasket made of silicone oil as the base material and added with heat-conducting, insulating, and temperature-resistant materials.
Thermally Conductive Materials with Ultra-high Thermal Conductivity
The thermally conductive material is a general term for materials that are coated between the heating device and the cooling device of the equipment and reduce the contact thermal resistance between the two.
Will the Silicon-free Thermal Pad Produce Oil?
There are many kinds of thermal conductive materials, such as thermally conductive silica gel, silicon-free thermal conductive film, thermally conductive phase change film, thermally conductive gel, thermally conductive paste, carbon fiber thermally conductive gasket, thermally conductive insulating film, etc.
Rhyton Thermal Conductive Materials and Insulation Materials: Thermal Management Secrets of New Energy Vehicle
Thermal management is an important link in the design of automobile charging piles, which directly affects the stability and service life of it. This article introduces how the thermal potting adhesive, thermal insulator and thermal grease from Rhyton protect the charging gun and charging pile of new energy vehicles.
AI High Computing Power Server Heat Dissipation, Using Thermal Conductivity Materials above 8W/mk
The promotion of ChatGPT technology has further promoted the popularity of high-power application scenarios such as AI computing power. By connecting a large number of corpora to train models and achieve scene functions such as human-computer interaction, a large amount of computing power is required behind it. Synchronization consumption is greatly improved. With the continuous and rapid improvement of chip performance, the problem of heat dissipation has become more prominent.
A Brief Description of Thermally Conductive Gap Filler Material-Silicon-free Thermal Pad
Power consumption electronic components are the main body of heat generation in electronic equipment. The higher the power of electronic components, the more heat they will generate. However, the development trend of science and technology in today‘s society is based on high performance, high integration and light weight. Mainly, the performance of electronic components is getting stronger and stronger, which also means that their power is also rising, so the heat dissipation must keep up with the pace.
How to Choose from Silicone Thermal Pad and Phase Change Thermal Pad?
In the fields of electronic product manufacturing and the automotive industry, thermal management solutions are crucial for the performance and longevity of devices. The choice of thermal conductive materials directly affects the efficiency of heat dissipation. This article compares two commonly used thermal conductive materials: silicone thermal pads and phase change thermal pads.
A Brief Description of Thermally Conductive Materials - Thermally Conductive Gel
Thermally conductive gel is one of many gap-filling materials for thermally conductive materials. It can fully fill the gap between the contact interfaces and remove the air in the gap, thereby reducing the interface contact thermal resistance, so that heat can be quickly transferred to the radiator.
A Brief Description of Thermally Conductive Materials - Carbon Fiber Thermal Pads
The popularization and research of 5G communication technology enables people to feel the experience of high-speed surfing in the network world, and also promotes the development of some 5G-related industries, such as unmanned driving, VR/AR, cloud computing, etc., 5G communication technology In addition to bringing people a pleasant network experience, it also has the problem of heat dissipation that needs to be solved.
Heat Dissipation Requirements of Electronic Components and Application of Thermally Conductive Materials
After using the thermally conductive material, the gap between the two can be effectively filled and the air in the gap can be removed, thereby improving the operating environment of the electronic components.
Why Look for A Thermally Conductive Material with Low Thermal Resistance?
A thermally conductive material is a general term for materials that are coated between heat-generating devices and heat-dissipating devices and reduce the contact thermal resistance between the two.
How Thin Is The Thermal Conductive Silicone Pad
Generally speaking, the thinner the thermal conductive silicone pad, the better, so that it can be more useful for conducting heat. However, there is also a limit, it is not possible to reach the thickness of thermal insulating materials or thermal conductive silicone screen printing.
The Three Factors that Affect the Performance of the Thermal Silicone Pad During Use
Thermal silicone pad is one of the more commonly used traditional thermal conductive materials. It is a kind of soft silicone as the base material and is made of thermally conductive, temperature-resistant, and insulating materials in a certain proportion.
Heat Dissipation Application of Thermal Materials in Outdoor Communication Cabinets
By filling the gap between the heat dissipation device and the heat source, Thermally conductive materials air between the interfaces is eliminated. This reduces the contact thermal resistance between the two, thereby improving the heat dissipation effect of the cabinet.
Application of Thermally Conductive Materials in Small Spaces
The main heat source of the brain is the central processing unit. Under normal circumstances, a radiator is installed on the central processing unit to guide heat to the radiator. However, the internal space such as mobile phones, chargers, tablets, etc. is extremely narrow.
电子商城
授权代理品牌：集成电路
授权代理品牌：分立元件
授权代理品牌：接插件及结构件
授权代理品牌：部件、组件及配件
授权代理品牌：电源及模块
授权代理品牌：电子材料
授权代理品牌：仪器仪表及测试配组件
授权代理品牌：电工工具及材料
授权代理品牌：机械电子元件
授权代理品牌：加工与定制
我要提问
登录 | 立即注册
提交评论