Kinetic Technologies Developed KTS1678 and KTS1679-1, Two Surge Protected, Single Input, Dual Output Load Switches with OVP
San Jose, Calif. September 5, 2016 – Kinetic Technologies, a high-performance analog and mixed-signal semiconductor company focused on developing power management solutions for computing, consumer, industrial, and communications markets, today introduced the KTS1678 and KTS1679-1, both single input, dual output, surge protected, Load Switches with selectable OVP. The KTS1678 and KTS1679-1 are specifically designed for routing VBUS power to provide alternative functions in mid-to-high end smartphones or tablets.
Both the KTS1678 and KTS1679-1 consist of two very low resistance power switches configured as single input, dual output, change-over switch. The input to both switches is protected against VBUS surge voltages of up to 100V, and is also protected against over-voltage, on both the VBUS to OUT and VBUS to SYS paths, providing protection to downstream components from abnormal input conditions. The main switch (VBUS to OUT) features a unidirectional, 23m, active-LOW enabled 3.5A rated MOSFET, while the secondary switch (VBUS to SYS) is a reverse-blocking, 30m, active-HIGH enabled, 6.0A rated MOSFET. Both input switches are rated up to a maximum of 28V. The KTS1678 has a fixed OVP trip point of 13.9V 400mV for the VBUS to OUT switch, with an OVP trip point of 5.25V 250mV for VBUS to SYS switch. The KTS1679-1, replaces the SHDN pin (used to conserve power) with a SEL pin, giving the user the option to either select the VBUS to OUT OVP trip point to 10.4V 300mV by allowing the SEL pin to float or to 5.8V 200mV by tying the SEL pin to GND. This allows compatibility with many of the fast charging schemes, that use higher charging voltages. The VBUS to BAT OVP remains fixed at 5.8V 400mV.
When VBUS is greater than 2.7V, the KTS1678 POK LDO provides an always ON power source, regardless of the OVLO, EN1 and EN2 state, to power downstream components permitting operation without an installed battery. In the KTS1679, the POK LDO is replaced by a battery voltage sense function (SNS), that switches off the charging current to the battery, if the battery voltage exceeds its maximum rating.
The introduction of the Type-C USB connector has provided smartphone manufacturers with both an opportunity and a challenge said Phil Dewsbury, Senior Director of Product Marketing at Kinetic Technologies, while the Type-C connector offers the ability to handle a higher charging current, those manufacturers previously using an un-committed pin on the Micro-USB connector for test purposes, have to look for an alternative solution. The KTS1678 offers those manufacturers the opportunity to use the VBUS pin to directly route the tester to the system board, bypassing the integrated battery charger. Alternatively, the KTS1679-1 allows manufacturers using high current, direct charging adapters to directly access the battery terminals, safe in the knowledge that any over-charge will be detected by the integrated OVP circuitry.
The KTS1678 and KTS1679-1 are supplied in a WLCSP-28, 2.96 x 1.67mm, RoHS and Green Compliant packages and are rated over the -40 degree C to +85 degree C temperature range.
Key Features of KTS1678/KTS1679-1
Single Input, Dual Output Low On- Resistance Switch
- VBUS to OUT: typ. 23m
- VBUS to SYS: typ. 30m (Reverse Blocking)
Wide Input Voltage Range: 2.7V 13.5V
VBUS Abs Max: 28V
Surge and ESD Protected Input
- Surge Protection
IEC61000-4-5: > 100V
ESD Protection
IEC61000-4-2 (Level 4) VBUS
Contact: 8kV
Air Gap: 15kV
HBM: 2kV All Pins
Integrated Over-voltage Protection (OVP)
- KTS1678
VBUS to OUT: 13.9V 400mV
VBUS to SYS: 5.25V 250mV
- KTS1679-1
VBUS to OUT: 10.4V 300mV or 5.8V 200mV
VBUS to SYS: 5.8V 200mV
Maximum Continuous Current
- VBUS to OUT: 3.5A
- VBUS to SYS: 6A
Dual Enable Control with Independent Shutdown Control
- Active LOW VBUS to OUT
- Active HIGH VBUS to SYS
VBUS to SYS/BAT FLAG
Over Temperature Protection
KTS1678 Only
- Active HIGH Shutdown
- VBUS detection LDO
KTS1679-1 Only
- OVP Select
- Battery OVP
- |
- +1 赞 0
- 收藏
- 评论 0
本文由上山打老虎转载自Kinetic Technologies News,原文标题为:Kinetic Technologies Releases Two Surge Protected, Single Input, Dual Output Load Switches with OVP,本站所有转载文章系出于传递更多信息之目的,且明确注明来源,不希望被转载的媒体或个人可与我们联系,我们将立即进行删除处理。
相关推荐
Littelfuse Unveils Load Switch ICs Series with Ultra-low Power consumption Extends Battery Lifetime
Littelfuse new Load Switch ICs are ultra-efficient, 2 and 4 A-rated load switches with integrated true reverse current blocking (TRCB) and slew rate control. Their best-in-class efficiency makes them ideal for mobile and wearable consumer electronics.
Kinetic Technologies’ Enters the Automotive Market with KTS1640Q and KTS1641Q, AEC Q100 Qualified 6A, Reverse Battery Protected Load Switches with OVP
Kinetic Technologies has announced their entry into the automotive market with two new additions to their innovative power-management solutions; the KTS1640Q and the KTS1641Q. These reverse-battery protected load switches with OVP control protect system loads from the harsh environment of automotive.
Kinetic Issued Over-Voltage Protected, Slew-rate controlled, Load Switches KTS1670/1671 with Operation up to +28V Input
Kinetic introduced the KTS1670 and KTS1671, slew-rate controlled load switches with over-voltage protection to protect battery operated systems from malfunctions due to charger faults.
润石科技(RUNIC)信号链和电源管理芯片产品选型指南(英文)
描述- Runic Technology‘s product portfolio includes op-amps, comparators, analog switches, data converters, level shifters, little logic ICs, voltage references, LDOs, DC/DCs, load switches, reset ICs. These products are widely used in various industries, such as consumer electronics, computing, communications, industrial, and automotive markets.
型号- RS1G11,RS2G139,RS2259B,RS7266,RS822S,RS393,RS151,RS1G17,RS50XX,RS1G14,RS8471,RS1G332,RS1G09,RS3112-Q1,RS381,RS1GT32,RS1GT34,RS07,RS266,RS8411-Q1,RS2G00,RS1G32,RS175,RS2G08,RS1G38,RS2G07,RS8491,RS2G04,RS1G34,RS8461P,RS0108-Q1,RS6332-Q1,RS299,RS2G241,RS2G125,RS2G126,RS8021,RS164,RS2587A,RS165,RS2587B,RS2G17,RS724-Q1,RS2G14,RS8462P,RS1507,RS622-Q1,RS1506,RS624P,RS8552,RS8551,RS721P,RS8554,LM2903H,RS6334-Q1,RS721S,RS1G373,RSA240,RS2117H,RS595,RS621-Q1,RS238,RS358,RS8561,RS8442,RS722P,RS8562,RS8441,RS1G240,RS8444,RS8564,RS1G125,RS1G126,RS1920,RS8558,RS2T245,RS8557,RS224,RS221,RS8559,RS222,RS8452,RS3G11-Q1,RS1G157,RS1430B,RS138,RS724P,RS1G00,LM331,RS821S,RS121,RS240,RS1G07,RS1G08,RS1G06,RS1G04,RS8581,RS1G386,RS1G02,RS1G139,RS124,RS245,RS2118H,RS122,RS0302-Q1,RS4T245-Q1,RS4G02,RS3G34,RS4G00,RS1G97,RS432AE,RS4G08,RS1G175,RS0102,RS1G125-Q1,RS1434,RS0104,RS6GT17,RS0101,RS6GT14,RS1438,RS0108,RS240T,RS1T34,RS6GT04,LM393,RS2G86,RS1T45-Q1,RS4G08-Q1,RS1461,RS8905-Q1,RS1T45,RS3750,RS6903,RS4G32,RS1472,RS8T245,RS8557-Q1,RS121P,RS2T45-Q1,RS8422P,RS721P-Q1,RS8032,RS8034,LM2904,RS8907-Q1,RS1G58,LM2901,RS8031,LM2903,RS1G57,RS2601,RS34XX-Q1,RS0302,RS199,RS432-Q1,RS2604,RS2G34,RS181,RS2G32,RS186,RS3G04,RS8452P,RS8464P,RS8488P,RS431AE,RS8054,RS3G11,RS1G74,RS393-Q1,RS8051,RS8052,RS3G14,RS1G79,RS0202,RS0204,RS0208,RS1G86,RS722P-Q1,RS1G08-Q1,RS2233-Q1,RS244-Q1,RS8454P,RS431-Q1,RS8T245-Q1,RS4G86,RS541T-Q1,RS8T245A,RS2251-Q1,RS2252,RS2253,RS3221,RS2251,RS8907,RS3217,RS8906,RS3215,RS8908,RS4GT08,RS8901,RS8905,RS3219,RS8904,RS6332P,RS6332S,RS3231,RS3232,RS2260,RS824,RS2259,RS2257,RS2254,RS706,RS2255,RS8910,RS8912,RS8911,RS821,RS822,RS6331S,RS6331P,RS8702-Q1,RS331-Q1,RS540T,RS3235,RS2268,RS3236,RS3112,RS2266,RS8920,RS8802,RS8452-Q1,RS1G32-Q1,RS8801,RS1GT125,RS4GT125,RS1GT126,RS724,RS3007,RS541T,RS3005,RS3002,RS8931,RS722,RS721,RS16T245A,RS1120,RS2323,RS1473,RS1118,RS73XX-1,RS2582,RS2583,RS2580,RS2099H,RS2T45,RS595T,RS244S,RS595S,RS244T,RS8412P,RS4GT32,RS6G07,RS1G17-Q1,LM2901-Q1,RS809,RS6G04,RS595-Q1,RS2227,RS2228,RS2588,RS2105,RS2102,RS245T,RS2103,RS0104-Q1,RS2101,RS810,RS8414-Q1,RS811,RS6G17,RS6334P,RS138T,RS6G14,RS4538,RS803,RS804,RS2599,RS802,RS2233,RS806,RS8414P,RS90LV011,RS8631,RS8752,RS6331,RS8751,RS6332,RS550,RS2GT08,RS8512,RS8754,RS8511,RS8632,RS6334,RS2099,RS90LV011B,RS2260-Q1,RS90LV047A,RS8454-Q1,RS553,RS432,RS8502,RS8504,RS431,RS555,RS4G157,RS8761,RS8521,RS621P,RS8762,RS8402,RS8522,RS8764,RS8401,RS90LV048A,RS4538-Q1,RS4040,RS8551-Q1,RS90LV012A,RS8514,RS421,RS8634,RS422,RS540,RS6331BP,RS541,RS321BK-Q1,RS8651,RS622P,RS8411,RS8652,RS8654,RS8412,RS8552-Q1,RS2252F,RS339,RS622A,RS8404,RS8524,RS331,RS573,RS574,RS8541,RS8662,RS8661,RS8664,RS8422,RS8542,RS8424,RS74HC74,RS2251F,RS4T774,RS1905,RS8414,RS8538,RS321,RS8539,RS324,RS4G126,RS4G125,RS8412-Q1,LM2903-Q1,RS6651,RS421V,RS2166,RS4T245,RS8701,RS0102-Q1,RS8702,RS8704,RS633,RS8411BP,RS2058,RS422V,RS2057,RS2299,RS6658,RS8837,RS624,RS621,RS622,RS75XX-1,RS1GT14,RS1GT17,RS1G14-Q1,RS8501,RS8622,RS8621,RS1GT08,RS1GT04,RS631B,RS521,RS524,RS522
KTS1640, KTS1641 Load Switch with OVP and Reverse Polarity Protection
型号- KTS1640EDV-TR,KTS1641EDV-TR,KTS1640,KTS1641
Kinetic Technologies Introduced KTS1601 and KTS1605, Two Low-Resistance, Reverse-blocking, Slew-rate Controlled, Power Saving Load Switches
Kinetic Technologies introduced the KTS1601 and KTS1605, reverse-blocking, slew-rate controlled load switches with extremely low on-resistance. The KTS1601 and KTS1605 are ideal for use in single cell Lithium-ion battery-based equipment or any appliance operated from a fixed 3.3V or 5V supply, such as HDD or SSD.
Kinetic Technologies Releases Surge Protected Load Switches KTS1681/1682 with Over-voltage Protection
Kinetic Technologies introduced the KTS1681 and KTS1682, surge protected load switches with over-voltage protection to protect battery operated systems from malfunctions due to high voltage surge pulses and charger faults.
KTS1679 Surge Protected, Single Input, Dual Output Load Switch with OVP Preliminary Datasheet
型号- KTS1679-1,KTS1679,KTS1679EUQ-TR,KTS1679EUQ-1-TR
KTS1679 Datasheet Brief : Surge Protected, Single Input, Dual Output Load Switch with OVP
型号- KTS1679-1,KTS1679,KTS1679EUQ-TR,KTS1679EUQ-1-TR
电子商城
现货市场
登录 | 立即注册
提交评论