Unique LED Driver IC KTZ8807 by Kinetic Technologies Offers RGB Plus Selfie Flash Driver in Tiny UTDFN Package

时间： 2023-12-16 来源：Kinetic Technologies News

代理服务

技术支持

批量订货

KTZ8807: 24mA RGB LED Driver with AutoBlinQ™ Plus 600mA White/Infrared LED Driver Provides Unique Color Lighting Patterns

Power management leader Kinetic Technologies is announcing the industry’s first front-side solution LED driver for smartphones, the KTZ8807.

This innovative constant-current LED driver combines a programmable RGB indicator LED driver with a high current white LED front-side (selfie) flash driver. Using I²C compatible LED control and programmability, the KTZ8807 features superior user control through its adjustable on-chip timing control unit: LED blink rate and fade-in and fade-out, are user-adjustable, resulting in a range of unique color lighting patterns when driving RGB LEDs. An external strobe pin facilitates simple control of the selfie flash output, is also compatible with infrared LEDs, and includes a safety timer to terminate the flash event under fault conditions.

“Newer generations of mobile phones with front-facing cameras require adjustable current regulators to drive white LEDs for camera flash,” says Kinetic Technologies Vice President David Nam. “The KTZ8807 does just that. Our fully programmable, constant current RGB LED Driver, paired with a high current white LED driver provides four independent programmable low dropout, constant current sinks without requiring any external components, simplifying design and reducing component count.”

Additional control is offered via ten programmable internal registers, which, through the I²C control interface and built-in decoder, allow adjustability of the LED channels’ ON/OFF states and 193 current levels—ranging from 0.125mA to 24mA for channels D1-D3 and 39 current levels – up to 600mA for channel D4.

The device also features AutoBlinQ technology, which automatically turns LED1 on and off, at a pre-programmed blink rate, when no I²C command is received within 1s after power-up. A Smartphone with a deeply discharged battery can advise users that the phone is charging.

The KTZ8807 is available in a PB-Free, UTDFN 2.0mm x 2.0mm package.

Key applications for the Kinetic Technologies KTZ8807 include mobile phones, handheld devices, RGB indicator LEDs, front side flash(selfie flash), and infrared iris detection and communication.

发送到邮箱 |
+1 赞 0
收藏
评论 0
| 转发至：

本文由上山打老虎转载自Kinetic Technologies News，原文标题为:Unique LED Driver IC by Kinetic Technologies Offers RGB Plus Selfie Flash Driver in Tiny Package，本站所有转载文章系出于传递更多信息之目的，且明确注明来源，不希望被转载的媒体或个人可与我们联系，我们将立即进行删除处理。

全部评论（0）

暂无评论

Kinetic Technologies High-Efficiency 9 Channel IR LED Driver KTD2041 with Buck Regulator and I²C Control Interface

Kinetic Technologies announced its first dedicated IR LED driver KTD2041, the first IR LED driver to use an adaptive buck converter to control the current sink voltage headroom, thereby minimizing the power dissipation and optimizing the system efficiency to extend battery life.

2023-12-12 - 产品代理服务技术支持采购服务

Kinetic Technologies‘s Programmable RGB LED Driver KTD2052B with AutoBreathe™, Reduces System Size and Simplifies Software Development

Kinetic Technologies, is adding to its innovative line of RGB LED drivers with the introduction of the KTD2052B a 12-channel fully programmable current regulator capable of driving up to four RGB LEDs with fewer PCB traces.

2023-11-26 - 产品代理服务技术支持采购服务

Highly Programmable RGB and RGBW LED Driver Family KTD2026/2027 from Kinetic Features Smallest PCB Layout

Kinetic Technologies introduced the KTD2026/7 product family of RGB and RGBW LED Drivers for use in smartphones, tablet computers and other portable or mains powered electronics. The devices operate from 2.7V to 5.5V input voltage and can drive up to three or four LEDs, without the need for any inductors or flying capacitors.

2023-12-02 - 产品代理服务技术支持采购服务

SGM31324自动闪烁模式，带I²C接口的RGB LED驱动器

描述- SGM31324是一款具有I2C接口的三通道电流调节型RGB LED驱动器。它适用于由单节锂离子或锂聚合物电池供电的各种应用，以及3.3V或5V电源电压的系统，还包括3节镍镉、镍氢或碱性电池系统。该器件无需外部组件即可实现三个恒定电流源。用户可以通过两个可编程定时器调整LED闪烁时间并获得渐隐和渐显的独特灯光效果。

型号- SGM31324YUDW8G/TR,SGM31324

JUNE 2018 - SGMICRO - 数据手册 - REV.A. 1 代理服务技术支持采购服务查看更多版本

SGMicro(圣邦微) SGM31323 Constant Current RGB LED Driver with I2C Control 数据手册

描述- SGM31323是一款可编程的恒流RGB LED驱动器，具有灵活的控制接口。该设备适用于从单节锂离子电池、镍镉/镍氢/碱性电池或系统供电，提供三个独立的可编程恒流源，无需外部组件。它支持I2C控制接口，允许用户调整LED闪烁速率、淡入淡出效果，实现独特的颜色照明模式。

型号- SGM31323,SGM31323YUDW8G/TR

JUNE 2018 - SGMICRO - 数据手册 - REV.A.1 代理服务技术支持采购服务

具有可编程1.5A电流源的KTD2681闪光灯LED驱动器

描述- KTD2681是一款高效率的同步升压转换器，专为高功率闪光LED设计。它具有可编程的1.5A电流源，支持I2C接口编程和硬件STROBE/TORCH控制。产品具有多种保护功能，包括输入低电压保护、LED开路/短路保护、过压保护和热关断保护。

型号- KTD2681,KTD2681EUR-TR

August 2020 - KINETIC TECHNOLOGIES - 数据手册 - Revision 04b 代理服务技术支持采购服务查看更多版本

SUM6312四个恒流RGB LED驱动器，具有I²C控制功能

型号- SUM6312QN16,SUM6312

2019/2/22 - SUMSEMI - 数据手册 - V 1.0 代理服务技术支持采购服务

采用I²C控制的KTD2061/58/59/60 36通道RGB LED驱动器

描述- KTD2061/58/59/60系列是36通道RGB LED驱动器，具有I2C控制功能。该系列产品支持高达36个LED（12个RGB），具有多路复用LED电流驱动输出，可驱动14百万种颜色。产品特性包括独立指数渐变引擎、专利BrightExtend™技术和CoolExtend™技术，适用于AI智能音箱、汽车面板、物联网、游戏PC/键盘/控制器/VR和机器人等领域。

型号- KTD2060,KTD2061EUAC-EV1,KTD2061,KTD2061EUAC-TR,KTD2060EUAC-TR,KTD2058,KTD2059,KTD2058EUAC-TR,KTD2059EUAC-TR

March 2022 - KINETIC TECHNOLOGIES - 数据手册 - Revision 04e 代理服务技术支持采购服务查看更多版本

SGMicro(圣邦微) SGM31324 I2C Programmable RGB LED Driver with Auto Blink Mode 数据手册

描述- SGM31324是一款可编程的RGB LED驱动器，具有灵活的控制接口。该设备适用于从单节锂离子电池或3.3V/5V供电系统中为RGB LED提供独立的可编程恒定电流源。它支持高达192级电流设置，并可通过I2C控制接口进行编程，实现LED闪烁率、淡入淡出等功能。

型号- SGM31324YUDW8G/TR,SGM31324

JUNE 2018 - SGMICRO - 数据手册 - REV.A.1 代理服务技术支持采购服务

具有I²C接口的SGM31323恒流RGB LED驱动器

描述- SGM31323是一款具有I2C接口的三通道恒流RGB LED驱动器。它适用于由单节锂离子或聚合物电池供电的各种应用，以及3.3V或5V电源电压的系统，还包括3节镍镉、镍氢或碱性电池系统。该产品具备可编程LED电流、低噪声、快速启动等特点，并支持独立通道控制。

型号- SGM31323,SGM31323YUDW8G/TR

JUNE 2018 - SGMICRO - 数据手册 - REV. A. 1 代理服务技术支持采购服务

KTD2801/A/B 36V/30V/24V升压LED驱动器，内置二极管和串行控制

描述- 该资料介绍了KTD2801/A/B系列LED驱动器，这是一款高效的DC-DC升压转换器架构的恒流LED驱动器。它具有宽输入电压范围、高效率、集成度高、多种控制方式等特点，适用于LED背光、手机、手持设备、数码相框、汽车导航等领域。

型号- KTD2801AECD-TR,KTD2801,KTD2801AEHD-TR,KTD2801ECD-TR,KTD2801B,KTD2801EHD-TR,KTD2801A,KTD2801BEHD-TR,KTD2801BECD-TR

August 2024 - KINETIC TECHNOLOGIES - 数据手册 - Revision 04c 代理服务技术支持采购服务

采用I²C控制的KTD2052 12通道RGB LED驱动器

描述- 该资料介绍了KTD2052，一款由Kinetic Technologies生产的12通道RGB LED驱动器。它具有I2C控制功能，可驱动多达12个LED（其中4个为RGB）。产品特点包括多路复用LED电流驱动输出、高达1400万种颜色选择、独立指数渐变引擎、灵活的模式生成器和看门狗计数器、可选的AutoBreathe™模式以及专利BrightExtend™技术。适用于智能音箱、汽车指示灯和氛围照明、物联网、游戏、玩具等。

型号- KTD2052AEVAA-TR,KTD2052,KTD2052B,KTD2052C,KTD2052D,KTD2052CEVAA-TR,KTD2052BEVAA-TR,KTD2052DEVAA-TR,KTD2052A

October 2021 - KINETIC TECHNOLOGIES - 数据手册 - Revision 04b 代理服务技术支持采购服务

带I2C控制的SUM6312B四路恒流RGB LED驱动器

描述- SUM6312B是一款四通道恒流RGB LED驱动器，具备I2C接口控制功能。该产品适用于单节锂离子/聚合物电池、三节镍镉/镍氢/碱性电池、3.3 V或5 V电源供电。每个通道可通过内部寄存器编程，实现多种工作模式，提供192个电流级别，支持LED闪烁、渐变等功能。该驱动器具有低dropout、低功耗、高集成度等特点，适用于RGB指示灯、手机、手持设备、数码相机等应用。

型号- SUM6312B,SUM6312BQN20

2022/8/24 - SUMSEMI - 数据手册 - V 1.1 代理服务技术支持采购服务

SUM6326具有I2C控制的恒流RGB LED驱动器

描述- SUM6326是一款具有I2C接口的恒流RGB LED驱动器，适用于单节锂离子/聚合物电池、三节镍镉/镍氢/碱性电池或3.3V至5V电源供电。该设备具有独立可编程的恒流源，无需外部组件，支持192级电流调节，具有低功耗、低噪声、快速启动等特点，适用于RGB指示灯、闪烁灯、手机、手持设备、数码相机等应用。

型号- SUM6326,SUM6326UDC8

2019/11/4 - SUMSEMI - 数据手册 - V 1.0 代理服务技术支持采购服务