Discussion on the Testing Method of Chip Fuses

知识图谱

时间： 2023-12-01 来源：XC News 发布者：旭程电子（深圳）有限公司

代理服务

技术支持

采购服务

We know that there are many series of fuses in the electronic component market, including patch fuses. This series of fuses is commonly used in factories, with few being used by individual users. But what should we pay attention to when testing patch fuses? Today, editor Dai Liang, let's take a look together. Firstly, The detection method for patch fuses is recommended to be based on the following aspects: normal current, fusing current, open circuit voltage, short circuit current, impulse current, and ambient temperature.

1. Normal current: Firstly, we must know the normal current flowing through the fuse in the circuit used. Usually, we need to pre-set a derating amount and choose according to the following principle: the normal current must be less than the product of the rated current and the derating coefficient.

2. Fusing current: According to UL specifications, the fuse should quickly fuse at twice the rated current. But in most cases, to ensure reliable fusing, we recommend that the fusing current should be greater than 2.5 times the rated current. In addition, if the fuse time is important, it must also refer to the fuse characteristic diagram provided by the manufacturer to make a judgment.

3. Open circuit voltage: The open circuit voltage should generally be selected to be less than the rated voltage. For example, when using a fuse with a rated voltage of DC24V in an AC100V circuit, it may ignite the fuse or cause it to rupture.

4. Short circuit current: We refer to the maximum current that flows when a circuit is short-circuited as the short circuit current. For various fuses, the rated breaking capacity is specified, and we must be careful not to exceed the rated breaking capacity when testing Chip Fuses. If a fuse with a small breaking capacity is selected, it may cause the fuse to rupture or cause a fire.

5. Impulse current: Observe the waveform of the impulse current and calculate its energy using the I²t value. The impact on the fuse varies depending on the size and frequency of the impulse current. The ratio of the I²t value of impulse current to the I²t value of single pulse fusing determines the number of times a fuse can withstand impulse current. (Recommended reading: Can a self-restoring fuse replace a disposable fuse tube?

Fig.1

发送到邮箱 |
+1 赞 0
收藏
评论 0
| 转发至：

本文由三年不鸣转载自XC News，原文标题为:sony bravia tv fuse location.Discussion on the Testing Method of Chip Fuses，本站所有转载文章系出于传递更多信息之目的，且明确注明来源，不希望被转载的媒体或个人可与我们联系，我们将立即进行删除处理。

The Price Trend and Future of Fuses

2023-12-13 - 技术探讨 We know that in recent years, especially since 2016, domestic factories have increased their machinery and equipment on a large scale, especially the increase in square and SMD fuse automata, which has led to a continuous decline in these products in China. Especially, the price of square fuses has become transparent to the point where customers do not want to negotiate. There are actually several reasons for this situation.

代理服务

技术支持采购服务

Essential Knowledge for Selecting Automotive Fuses

2023-12-10 - 技术探讨 When a certain overload current passes through, the heat generated is radiated to the surrounding environment through the melt and shell, and the heat dissipated through convection, conduction, and other means gradually reaches a balance with the heat generated. If the generated heat is greater than the dissipated heat, the melt temperature can increase； When the temperature reaches or exceeds the melting point of the melt, the melt melts, fuses, and cuts off the current, playing a role in safety protection of the circuit.

代理服务

技术支持采购服务

Selection of Fuses in Small Home Appliance PCB Board

2023-12-08 - 设计经验 The fuses commonly used in PCB boards of small household appliances use self-recovery fuses to protect the circuit.

代理服务

技术支持采购服务

What Tips Should be Paid Attention to When Selecting SMD Fuses

2023-12-07 - 设计经验 Chip fuse is a relatively high-tech new variety in the small fuse industry. Chip fuse can be divided into disposable chip fuse and chip self recovery fuse. Disposable chip fuse, also known as chip current fuse, needs to be replaced after protection, and after self recovery fuse protection, power is cut off, it can be restored on its own and can be reused.

代理服务

技术支持采购服务

Discussion on the Application of Fuses on LED Beads

2023-12-07 - 技术探讨 Nowadays, many circuits use fuses for overload protection, but disposable fuses are not suitable for LED lamp products because the circuits of LED beads are very different from those of other products. LED bead circuit overload is caused by the overload protection component, which immediately disconnects the LED bead circuit and automatically restores power supply after the circuit is normal, without affecting LED operation.

代理服务

技术支持采购服务

Electric Vehicle Malfunctions Due to Lack of Fuses or Diodes

2023-12-06 - 技术探讨 With the development of life, electric vehicles have also become popular. In order to facilitate people‘s travel, many families have started to use electric vehicles, which are convenient and affordable. However, there are still many unknown problems that arise during use. Today, the editor will briefly talk about the structural issues of electric vehicles.

代理服务

技术支持采购服务

How Self Restoring Fuses Limit the Magnitude of the Current?

2023-12-06 - 设计经验 Both traditional disposable fuses and self restoring fuses can achieve overcurrent circuit protection. Both achieve protection by reacting to the heating phenomenon generated by excessive current in the circuit. Fuses break the current by blowing, while self restoring fuses rely on changing from a low resistance state to a high resistance state to limit the magnitude of the current.

代理服务

技术支持采购服务

SMD fuse and Chip Fuse Specifications

2023-12-04 - 技术探讨 SMD fuses can be divided into SMD disposable fuses and SMD self recovery fuses. Among them, the specifications of patch disposable fuses include series 060312062410 fuses, and the specifications and dimensions of patch self recovery fuses include series 0603, 0805, 1206, 1210, 1812, 2920, etc.

代理服务

技术支持采购服务

Main Parameters for Selecting Patch Fuses

2023-12-03 - 设计经验 The voltage rating of the fuse must be greater than or equal to the high voltage of the disconnected circuit. Due to the very low resistance of the fuse, the voltage rating of the fuse becomes important only when the fuse attempts to blow. After the fuse element melts, the fuse must be able to quickly disconnect, extinguish the arc, and prevent the open circuit voltage from triggering the arc again through the disconnected fuse element.

代理服务

技术支持采购服务

Introduction to the Application of Micro Fuse

2023-12-03 - 技术探讨 A professional enterprise engaged in the research and development, production, and sales of patch fuses and plug-in fuses. All products meet the requirements of lead-free and halogen-free environmental protection, and have obtained foreign authoritative safety certification such as UL, VDE, TUV, etc. The products are widely used in industries such as computers, communication, security, automobiles, toys, and household appliances.

代理服务

技术支持采购服务