Factors Affecting the Lifespan of Fuses and Their Evaluation

时间： 2023-12-17 来源：XC News

技术问答

选型帮助

研发客服

商务客服

1. Factors that affect the lifespan of fuses:

Working environment temperature:

Excessive ambient temperature can damage the lifespan of the fuse. Delay type (slow melting type) fuses, such as tin ball type, begin to diffuse towards the metal wire when the temperature is about (150-170℃); The temperature at which the fusible metal wire of a quick fuse begins to undergo severe oxidation is approximately (175-225℃).

Therefore, it is recommended that the delay type fuse should not work above 150℃ for a long time, and the fast melting type fuse should not work above 175~225℃ for a long time.

Pulse current:

Continuous pulse impact can generate thermal cycling, leading to diffusion, oxidation, thermal stress, and even acceleration of the fuse. The fuse will gradually age with increasing pulse energy and frequency. Normally, it should be less than 20% to ensure that the fuse can withstand more than 100000 impacts.

Other:

For example, the length and cross-sectional area of the pipe clamp in contact with the fuse and the connecting wire. The contact resistance between the fuse and the clamp is high, which is detrimental to its lifespan. As required by UL standards, the contact resistance between the fuse and the clamp during testing is less than 3mΩ.

Fig.1

发送到邮箱 |
+1 赞 0
收藏
评论 0
| 转发至：

本文由三年不鸣转载自XC News，原文标题为:what does a tv fuse look like.Factors affecting the lifespan of fuses and their evaluation，本站所有转载文章系出于传递更多信息之目的，且明确注明来源，不希望被转载的媒体或个人可与我们联系，我们将立即进行删除处理。

全部评论（0）

暂无评论

Encapsulation Forms of Current Fuses

The encapsulation of current fuses is an important aspect that affects their performance, durability, and safety.

技术探讨发布时间 : 2024-11-13

Professional Knowledge of Self-healing Fuses

The operating principle of a self-healing fuse is a dynamic balance of energy. The current flowing through the self-healing fuse generates a certain amount of heat due to the thermal effect of the current (self-healing fuses all have resistance values), and the generated heat is completely or partially dissipated into the environment. The heat that is not dissipated will increase the temperature of the self-healing fuse components. The temperature during normal operation is relatively low, and the heat generated and dissipated reaches a balance.

技术探讨发布时间 : 2023-11-30

Explanation of Parameters in the PPTC Specification for Self Healing Fuses

This is very simple. As long as you know the meaning represented by the parameters in the specification book, you can clearly and quickly view the PTC specification book for self recovery fuses.

技术探讨发布时间 : 2024-08-21

旭程（XC）温控器选型指南

目录- 公司介绍 Company Profile 温控器 Thermostat 保险丝 Fuses 企业资质与专利 Qualification and Patents Certifications

型号- C0015302Z,9K7.SK-B5,KSD305系列,9K7.SK-B3,CG-B,CG-A,SK-B1系列,9K7CG-XXX,SK-B5系列,KSD301系列,KSD307B,SK-A1,KSD307 SERIES,SK-A4,C0015301Z,9K7.SK-C2,SK-C2系列,C0025302Z,C4000302Z,KT SERIES,9K7.JW-A072,C2000302Z,CG-B系列,C0080303Z,9K7.SK-B11,JW-C系列,KSD305B,JW,KSD305-XXXX/XXXX,SK-C2,9K7SK-XXXX/XXXXX,C4000301Z,C5000301Z,SK,CG SERIES,9K4307-XXXX/XXXX,C0020302Z,CG,KT,KSD9700 SERIES,SK-B1,C5000302Z,C1000302Z,C0050303Z,SK-B5,C0035302Z,C0020303Z,C0040302Z,KSD307系列,KSD301-XXX/XXXXXX/XXX,9K7KT-XXXX/XXXXX,9K7.SK-F3,SK-F5系列,JW-B系列,C0060303Z,KSD9700,C0030301Z,KT系列,C7500301Z,C0070303Z,C0040303Z,SK-A1系列,9K9.9700-XXXXXXX,KSD305,KSD307,KT-A2,KT-A1,KSD301,C0030302Z,JW SERIES,JW系列,C0020301Z,C7500302Z,C0010302Z,9K4.307B,JW-A系列,CG-A1,C0025301Z,CG系列,KSD9700系列,C3000301Z,C2000301Z,C0030303Z,KT-A系列,SK SERIES,JW-B,JW-C,SK系列,KSD301 SERIES,KSD305 SERIES,CG-B2,C0010301Z,SK-F5,C3000302Z,SK-F6,9K7JW-XXXX,CG-A系列,KSD307-XXXX/XXXX,KT-A,9K4.307

选型指南 - 旭程 - 2014/11/25 PDF 中英文下载

Calculation Method for Melt Current of Fuse Fuses

The current of a fuse includes two aspects, one is the rated current of the fuse tube, and the other is the rated current of the melt, which cannot be confused.

设计经验发布时间 : 2023-11-24

The Role of Current Fuses in Smart Meters

Current fuses play a vital role in smart meters. Firstly, they provide protection against overcurrent events. Smart meters are used to measure and manage electricity consumption accurately. However, electrical circuits can sometimes experience sudden surges in current due to various reasons such as power outages and subsequent restoration, short circuits in the electrical grid, or the malfunction of connected electrical appliances.

技术探讨发布时间 : 2024-11-08

Self Recovery Performance and Working Process of Self Recovery Fuses

Traditional fuses are installed in circuits. When an overcurrent occurs due to a fault or abnormality in the circuit, the fuse itself melts to cut off the current and protect the circuit. However, due to the fact that traditional fuses can only protect once and need to be replaced if burned out, some products still cannot resume operation after troubleshooting or abnormal overcurrent disappears. As a new type of overcurrent protection device, the self-recovery fuse has the function of automatic recovery, which can meet the performance requirements of similar applications.

技术探讨发布时间 : 2023-12-15

Electric Vehicle Malfunctions Due to Lack of Fuses or Diodes

With the development of life, electric vehicles have also become popular. In order to facilitate people‘s travel, many families have started to use electric vehicles, which are convenient and affordable. However, there are still many unknown problems that arise during use. Today, the editor will briefly talk about the structural issues of electric vehicles.

技术探讨发布时间 : 2023-12-06

Several Factors Influence the Lifetime of Current Fuses

The lifetime of a current fuse is influenced by several factors. Firstly, the current rating of the fuse plays a crucial role. If a fuse is constantly operating near or at its rated current, it will experience more heat buildup and stress over time, which can shorten its lifetime.

技术探讨发布时间 : 2024-11-06

Essential Knowledge for Selecting Automotive Fuses

When a certain overload current passes through, the heat generated is radiated to the surrounding environment through the melt and shell, and the heat dissipated through convection, conduction, and other means gradually reaches a balance with the heat generated. If the generated heat is greater than the dissipated heat, the melt temperature can increase； When the temperature reaches or exceeds the melting point of the melt, the melt melts, fuses, and cuts off the current, playing a role in safety protection of the circuit.

技术探讨发布时间 : 2023-12-10

035.1315C0001 6CH 系列 3.15A 1000V 带引线 6.35*32 小型保险丝（环保产品）产品承认书

型号- 6CH SERIES,6CH 系列,6CH,035.1315C0001

数据手册 - 旭程 - Ver.1.0 - 2020-5-25 PDF 中文下载

The Installation Precautions for Current Fuses

The installation of current fuses is crucial for ensuring the safety and proper functioning of electrical circuits. Here are some important installation precautions to keep in mind.

设计经验发布时间 : 2024-11-04

Classification of Fuses

Fuses are divided into two categories: high voltage and low voltage. High voltage fuses for 3kV-35kV； Low voltage fuses are used for AC 220V, 380V, and DC 220V, 440V.

技术探讨发布时间 : 2023-11-30

The Selection of Miniature Fuses

Miniature fuses are primarily used in digital cameras, laptops, mobile phones, and other electronic products. From traditional glass tube fuses to miniature fuses, the selection focus varies slightly due to differences in product technology. The selection of miniature fuses involves the following elements.

设计经验发布时间 : 2024-01-04

Principle of Resettable Current Fuses

Resettable current fuses offer a unique solution for protecting electrical circuits while providing the convenience of being reusable. Here‘s how they work.

技术探讨发布时间 : 2024-10-31