Correct Use of Power Filters

2023-12-20 VIIP News
filter,power filters,维爱普 filter,power filters,维爱普 filter,power filters,维爱普 filter,power filters,维爱普

During the test, we often encountered such a situation: although the design engineer connected a power filter to the power line of the equipment, the equipment still could not pass the "conducted disturbance voltage emission" test, and the engineer suspected that the filtering effect of the filter was not good. Constantly replace the filter, still can not get the desired effect.


The reasons for analyzing the equipment exceeding the standard are nothing more than the following two aspects:

The harassment generated by the equipment is too strong

Insufficient filtering of equipment


For the first case, we can solve it by taking measures at the source of disturbance to reduce the intensity of disturbance, or increase the order of the power filter to improve the filter's ability to suppress disturbance. For the second case, in addition to the poor performance of the filter itself, the installation method of the filter also has a great influence on its performance. This is often overlooked by design engineers.


In many tests, we were able to get the device to pass the test by changing the way the filter was mounted. Below are some examples of the effects of common filter installation errors on filter performance.


Input Cable Is Too Long

After the power cords of many devices enter the chassis, they go through a long wire to the input of the filter. For example, the power cord enters from the rear panel of the chassis, runs to the power switch on the front panel, and then goes back to the rear panel to connect to the filter. The installation position of the filter is far from the inlet of the power cable, resulting in the lead wire being too long (as shown in Figure 1).


Because the lead from the power inlet to the filter input is too long, the electromagnetic disturbance generated by the device is re-coupled to the power line through capacitive or inductive coupling, and the higher the frequency of the disturbance signal, the stronger the coupling, causing the experiment to fail.

Parallel Trace

To make the wiring inside the chassis beautiful, some engineers often bundle the cables together, which is not allowed for power cables. If the input and output lines of the power filter are routed in parallel or bundled together, due to the distributed capacitance between the parallel transmission lines, this wiring method is equivalent to connecting a capacitor in parallel between the input and output lines of the filter, which is a disturbance signal. A path is provided to bypass the filter, resulting in a significant performance degradation of the filter, or even failure at very high frequencies (as shown in Figure 2).

 


The size of the equivalent capacitance is inversely proportional to the wire distance and proportional to the length of the parallel traces. The larger the equivalent capacitance, the greater the impact on the filter performance.


Ground and Case

This situation is also relatively common. When many engineers install the filter, the connection between the filter housing and the chassis is poor (with insulating paint); at the same time, the ground wire used is long, which will lead to the deterioration of the high-frequency characteristics of the filter and reduce the filtering performance.


Due to the long ground wire, the distributed inductance of the wire cannot be ignored at high frequencies. If the filter is well connected, the interfering signal can be directly grounded through the housing. If the connection between the filter housing and the chassis is poor, it is equivalent to there being a distributed capacitance between the filter housing (ground) and the chassis, which will cause the filter to have a high ground impedance at high frequencies, especially in the case of distributed inductance. Near the frequency at which the distributed capacitance resonates, the ground impedance tends to be infinite.


Influence of poor filter grounding on filter performance: Due to the poor grounding of the filter, the grounding impedance is large, and some disturbance signals can pass through the filter (as shown in Figure 3). To solve the poor overlap, the insulating paint on the chassis should be scraped off to ensure a good electrical connection between the filter housing and the chassis.


In this installation method, the housing of the filter is in good contact with the chassis, which can block the opening of the power cord on the chassis and improve the shielding performance of the chassis; in addition, the input and output lines of the filter are isolated by the chassis shielding, eliminating the disturbance coupling between the input and output lines and ensuring the filtering performance of the filter.

授权代理商:世强先进(深圳)科技股份有限公司
技术资料,数据手册,3D模型库,原理图,PCB封装文件,选型指南来源平台:世强硬创平台www.sekorm.com
现货商城,价格查询,交期查询,订货,现货采购,在线购买,样品申请渠道:世强硬创平台电子商城www.sekorm.com/supply/
概念,方案,设计,选型,BOM优化,FAE技术支持,样品,加工定制,测试,量产供应服务提供:世强硬创平台www.sekorm.com
集成电路,电子元件,电子材料,电气自动化,电机,仪器全品类供应:世强硬创平台www.sekorm.com
  • +1 赞 0
  • 收藏
  • 评论 0

本文由上山打老虎转载自VIIP News,原文标题为:Correct use of power filters,本站所有转载文章系出于传递更多信息之目的,且明确注明来源,不希望被转载的媒体或个人可与我们联系,我们将立即进行删除处理。

评论

   |   

提交评论

全部评论(0

暂无评论

相关推荐

How to Use the Different Frequency Dependencies to Manipulate Impedance and Create Various Filter Responses?

Knowles covered how RF designers can use the different frequency dependencies of capacitors and inductors to manipulate impedance and create various filter responses.

设计经验    发布时间 : 2022-03-27

​维爱普抗干扰磁环:EMC电磁兼容设计的重要性

EMC设计应是任何电子器件和系统综合设计的一部分。它远比试图使产品达到EMC的其他方法更节约成本,电源滤波器维爱普介绍电磁兼容的设计技术及其重要性。

设计经验    发布时间 : 2024-02-23

Switch Filter Banks for Agile RF Receiver Design in Radar

This is the third installment in our RF Components for Radar series. In the first installment, we provided an overview of the key functional units in radar, including duplexing, filtering, power amplification, waveform generation, low-noise amplification (LNA), receiving and analog-to-digital conversion (ADC). Here, we’ll focus on a particular form of filtering technology: switch filter banks.

设计经验    发布时间 : 2024-06-14

维爱普(VIIP)电源滤波器选型指南

描述- 维爱普的产品广泛应用于大小家用电器产品,IT、AV类产品,室内外显示屏产品,各种新能源电源,通信、电力电源,太阳能光伏电源,工业和医疗设备,通信与通讯产品,数字工控产品,精密仪器仪表、电动工具,健身器材设备,电梯设备,机械设备,3D打印设备,各种激光设备,人工智能产品和智能家具产品,军工及航空类产品。

型号- VIP9-2B-06,VIP6-33N-30,VIP2-1B-06,VIP6-33G-150,VIP6-33M-100,VIP3-41A系列,VIP7-1B-16,VIP3-43D系列,VIP5-34G-50,VIP9-2B-03,VIP9-2B系列,VIP3-41A-20,VIP6-33M-60,VIP7-1B-10,VIP9-2B-01,VIP6-33N-150,VIP2-2A系列,VIP4-2A-10,VIP3-43D-06,VIP8-1P SERIES,VIP3-42C-10,VIP3系列,VIP1-1D系列,VIP2-2B-30,SCNF,VIP4-2A-03,VIP3-42C系列,VIP4-2A-01,VIP3-41A-30,VIP4-2A-06,VIP6-33N-40,VIP3-43D-10,VIP2-2A SERIES,VIP3-42C-06,VIP1-2G SERIES,VIP11-1C-10,VIP3-42C-20,VIP6D-13A-630,VIP7-1C-10,VIP6-33M-120,VIP3-42B-50,VIP1-2F系列,VIP7-1C-16,VIP3-41A-40,VIP6-33M-80,VIP4-2A SERIES,VIP6-33N-50,VIP5-34G-30,VIP6-33N-1000,VIP3-43D-40,VIP3-41A,VIP5-34G,VIP8-41G-60,VIP2-1B-10,VIP3-43D-25,VIP4系列,VIP1-1E系列,VIP6-33N-65,VIP2-2B-50,VIP3-42B系列,VIP3-41A-50,VIP3-43D-30,VIP3-32B-150,VIP3-31A系列,VIP1-2G,VIP1-2F,VIP7-1A-06,VIP2-1B-50,VIP3-43D-60,VIP5-33C,VIP3-31A-200,VIP3-32C系列,VIP3-42C-50,VIP1-1B系列,SCRC,VIP1-1E,VIP1-1D,VIP6-33M-150,VIP9-2C-06,VIP1-1C,VIP1-1B,VIP8-31D-30,VIP5系列,VIP1-1A,VIP6-33N-80,VIP2-2B-80,VIP9-2C-03,VIP7-1A-10,VIP9-2C-01,VIP3-43D-50,VIP3-43D-120,VIP3-43D-150,VIP1-2F SERIES,VIP11-1B-03,VIP(1)-(2)(3)-(4)-(5),VIP11-1B-01,VIP8-31C系列,VIP4-3A-100,VIP3-41A-80,VIP3-43D-80,VIP5-2A系列,VIP11-1B-06,VIP3-31A-100,VIP3-32B系列,VIP1-1C系列,VIP9-1A-03,VIP9-1A-01,VIP6系列,VIP9-1A-06,VIP4-1B-20,VIP9D-1A系列,VIP8-1A系列,VIP4-2B-200,VIP2-2B,VIP11-1B 系列,VIP9D-1A,VIP6-33N系列,VIP4-1B-10,VIP9D-2C系列,VIP2-2A,VIP5-33C-30,VIP9-2C SERIES,VIP4-2B-50,VIP3-43D-200,VIP2-1A,VIP4-1B-06,VIP2-1B,VIP4-3A-01,VIP6-33M-06,VIP9D-2C,VIP4-3A-03,VIP9D-2B,VIP4-3A-06,VIP8-1B系列,VIP2-2A-10,VIP4-2B SERIES,VIP4-2C-10,VIP4-3A-10,VIP6-33M-15,VIP2-2A-06,VIP9D-2B-06,VIP9D-2B-01,VIP1-1A系列,VIP2-2A-03,VIP9D-2B-03,VIP2-2A-01,VIP5-33C-50,VIP6-33M-10,VIP4-3A-150,VIP4-2C-03,VIP4-2C-06,VIP4-2C-01,VIP3-43D-100,VIP5-34G-06,VIP6-33G-630,VIP4-1A-10,VIP6-33M-20,VIP4-1B,VIP6-33M-25,VIP4-3A-20,VIP1-1A-16,VIP4-1A SERIES,VIP1-1A-15,VIP9D-1A-06,VIP9D-1A-01,VIP9D-1A-03,VIP3-32B SERIES,VIP5-34G-10,VIP1-1A-10,VIP3-43D,VIP4-2B-20,VIP3-31A,VIP6-33N-06,VIP4-1A-06,VIP2-1B-100,VIP4-1A-01,VIP4-1A-03,VIP5-2A-20,VIP6-33M-30,VIP1系列,VIP1-1A-06,VIP11-1B,VIP11-1A,VIP5-34G-20,VIP11-1C,VIP1-1A-01,VIP3-42C,VIP4-2B-10,VIP1-1A-03,VIP3-42B,VIP9D-2C-06,VIP6-33N-800,VIP9D-2C-01,VIP3-31A SERIES,VIP9D-2C-03,VIP3-42B-10,VIP5-2A-10,VIP5-3B-20,VIP6-33M-40,VIP6-33N-10,VIP2-2B-20,VIP4-2B-100,VIP6-33N-15,VIP1-1B-06,VIP5-2E系列,VIP4-2B-06,VIP1-1B-03,VIP1-1B-01,VIP5-34G SERIES,VIP6-33G-400,VIP2-1A-01,VIP5-3B-10,VIP2-1A-03,VIP6-33N-20,VIP3-42B-20,VIP9D-2B系列,VIP6-33M-1000,VIP5-2A-01,VIP2系列,VIP4-3A-50,VIP5-2A-03,VIP3-41A-06,VIP6-33N-25,VIP5-2A-06,SCNF TYPE,VIP3-41A-10,VIP6-33M-50,VIP6D-13A-150,VIP8-1P系列,VIP3-32C,VIP3-32B,VIP5-3B-06,VIP5-2E,VIP8-1B SERIES,VIP11,VIP5-3B-03,VIP6-33G-80,VIP6D-13A-1200,VIP5-2A,VIP3-42B-150,VIP7-1A系列,VIP5-2E SERIES,VIP7-1B系列,VIP4-3A系列,VIP5-3B SERIES,VIP8-1B-03,VIP8-1B-01,VIP8-1B-06,VIP1-1B-10,VIP5-2A SERIES,VIP8-31C,VIP8-41G系列,VIP8-1B-10,VIP4-3A,VIP1-1C-10,VIP4-2A,VIP3-31A-80,VIP11系列,VIP4-2C,VIP4-2B,VIP1-1C-06,VIP6D-13A-65,VIP3-42B SERIES,VIP6-33M-800,VIP3-32C-50,VIP1-1C-01,VIP4-1B-200,VIP1-1C-03,VIP4-2B系列,VIP8-41G,VIP6-33N-500,VIP5D-2E,VIP4-1B SERIES,VIP5-33C系列,VIP6-33N SERIES,VIP8-1P-1,VIP1-1D-01,VIP1-1D-06,VIP3-32C SERIES,VIP1-1D-03,VIP4-3A SERIES,VIP1-2F-03,VIP1-2F-01,VIP1-2F-06,VIP4-1B-50,VIP9D-2C SERIES,VIP1-2F-10,VIP6-33N-400,SCFS TYPE,VIP4-2A系列,VIP8-1A-01,VIP3-41A-200,VIP8-1A-03,VIP5-33C-20,VIP8-1A-06,VIP8-41G SERIES,VIP4-2C SERIES,VIP7-1C系列,VIP6-33N-630,VIP6-33M系列,VIP3-42B-100,VIP5-3B,VIP5-33C-10,VIP4-1B-30,VIP8-1A-10,VIP9-1A SERIES,VIP5-33C-06,VIP1-1D-10,VIP9D-1A-0.5,VIP9-2B SERIES,VIP8-1A SERIES,VIP6-33N-300,VIP6D-13A,VIP3-32B-100,VIP5-33C SERIES,VIP1-2G-03,VIP3-41A-100,VIP8-1B,VIP8-1A,VIP1-2G-01,VIP3-43D SERIES,VIP8-31C-30,VIP1-2G-06,VIP3-31A-06,VIP1-2G-10,VIP4-1B-150,VIP8-1P,VIP4-1B系列,VIP3-32B-10,VIP11-1A-01,VIP8-31C-20,VIP1-1E-10,VIP6-33M,VIP6-33N,VIP6D-13A系列,VIP3-31A-20,VIP7系列,VIP6-33M-630,VIP3-42B-200,VIP6-33G,VIP6-33M-500,VIP3-31A-10,VIP5-34G系列,VIP1-1E-03,VIP5-3B系列,VIP1-1E-01,SCFS,VIP1-1E-06,VIP3-32B-20,VIP11-1A-03,VIP4-2C系列,VIP11-1A系列,VIP3-32B-200,VIP8-31D-20,VIP8-1P-03,VIP3-31A-150,VIP4-1A系列,SCRC TYPE,VIP2-2B SERIES,VIP8-1P-0.5,VIP7-1A,VIP2-1A SERIES,VIP8系列,VIP7-1B,VIP8-1P-06,VIP7-1C,VIP6-33G系列,VIP6-33M-400,VIP2-1B系列,VIP3-41A SERIES,VIP6-33N-200,VIP8-31C SERIES,VIP8-41G-40,VIP5D-2E-01,VIP5D-2E-03,VIP5D-2E-06,VIP3-31A-50,VIP9-2C,VIP9-2B,VIP6-33M-300,VIP1-2G系列,VIP1-1A SERIES,VIP6-33M SERIES,VIP5D-2E-10,VIP9系列,VIP8-41G-30,VIP2-1B SERIES,VIP9-1A,VIP3-41A-150,VIP3-42C SERIES,VIP4-1B-100,VIP2-1A系列,VIP6-33N-100,VIP11-1C系列,VIP4-1A/,VIP3-31A-30,VIP6-33M-200,VIP9-2C系列,VIP2-2B系列,VIP3-32C-20,VIP3-32B-50,VIP9-1A-0.5,VIP3-32C-06,VIP6-33G-1000,VIP8-41G-10,VIP3-31A-40,VIP9D-1A SERIES,VIP5,VIP6,VIP7,VIP8,VIP9D-2B SERIES,VIP9,VIP9-1A系列,VIP1,VIP3-32C-10,VIP2,VIP6-33N-120,VIP3,VIP4

选型指南  -  维爱普  - 2018/10/25 PDF 中文 下载

介绍五种常见的滤波器及其作用

在电子工程领域,滤波器是信号处理中不可或缺的一环。它们被广泛应用于通信、音频处理、图像处理以及控制系统等多个领域,用于滤除不需要的频率成分,保留或增强所需信号。本文维爱普小编将介绍几种常见的滤波器及其作用,帮助读者更好地理解滤波器的应用与重要性。

技术探讨    发布时间 : 2024-05-31

详解低通滤波器和高通滤波器的作用及区别

低通滤波器和高通滤波器都是信号处理中的常见电路元件或算法,它们的主要作用是根据信号的频率对其进行选择性通过或抑制。本文,维爱普来给大家详解低通滤波器和高通滤波器的作用及区别。

技术探讨    发布时间 : 2024-09-22

VIP4-2B-20 EMI FILTER APPROVAL SHEETS

型号- 804002005130310,B042Q0707,VIP4-2B-20

数据手册  -  维爱普  - Rev.4.1  - Oct.8.2021 PDF 英文 下载

揭秘低通滤波器的原理与应用

本文维爱普将介绍低通滤波器的原理、种类和应用。首先,将讨论低通滤波器的基本概念,然后详细介绍不同类型的低通滤波器,包括模拟低通滤波器、数字低通滤波器以及有源和无源滤波器。最后,将探讨低通滤波器在各种应用场景中的作用,如音频处理、通信、图像处理等。

技术探讨    发布时间 : 2024-02-07

数据手册  -  维爱普  - Rev.4.0  - Oct.11.2022 PDF 中英文 下载

数据手册  -  维爱普  - Rev.4.0  - Aug.08.2018 PDF 英文 下载

数据手册  -  维爱普  - Rev.4.0  - June.3.2019 PDF 英文 下载

VIP1-1D-06 EMI FILTER APPROVAL SHEETS

型号- B011X0473,VIP1-1D-06

数据手册  -  维爱普  - Rev.4.0  - May.25.2019 PDF 英文 下载

数据手册  -  维爱普  - Rev.4.0  - Oct.21.2019 PDF 中英文 下载

VIP3-31A-40 EMI FILTER APPROVAL SHEETS

型号- B031S0549,VIP3-31A-40

数据手册  -  维爱普  - Rev.4.0  - May.7.2019 PDF 英文 下载

数据手册  -  维爱普  - Rev.4.0  - Sep.20.2018 PDF 英文 下载

展开更多

电子商城

查看更多

品牌:维爱普

品类:EMI FILTER

价格:

现货: 0

品牌:维爱普

品类:电源滤波器

价格:

现货: 0

品牌:维爱普

品类:电源滤波器

价格:¥57.9693

现货: 0

品牌:维爱普

品类:电磁干扰滤波器

价格:

现货: 0

品牌:维爱普

品类:EMI FILTER

价格:

现货: 0

品牌:维爱普

品类:电源滤波器

价格:¥39.3847

现货: 0

品牌:维爱普

品类:电源滤波器

价格:¥44.4616

现货: 0

品牌:SGMICRO

品类:视频滤波器

价格:¥1.7323

现货: 39,858

品牌:千如电子

品类:SMD Line Filter

价格:¥1.5059

现货: 23,760

品牌:SGMICRO

品类:视频滤波器

价格:¥1.7323

现货: 21,187

品牌:

品类:

价格:

现货:

品牌:

品类:

价格:

现货:

品牌:

品类:

价格:

现货:

品牌:

品类:

价格:

现货:

品牌:

品类:

价格:

现货:

品牌:

品类:

价格:

现货:

品牌:

品类:

价格:

现货:

品牌:

品类:

价格:

现货:

品牌:

品类:

价格:

现货:

品牌:

品类:

价格:

现货:

现货市场

查看更多

品牌:千如电子

品类:Line Filter

价格:¥1.5500

现货:137,800

品牌:千如电子

品类:Line Filter

价格:¥1.5500

现货:87,100

品牌:AVAGO

品类:薄膜体声波谐振器

价格:¥10.7259

现货:53,240

品牌:千如电子

品类:SMD Line Filter

价格:¥0.7100

现货:10,000

品牌:千如电子

品类:SMD Line Filter

价格:¥1.0000

现货:10,000

品牌:千如电子

品类:SMD Line Filter

价格:¥0.8200

现货:7,000

品牌:聚洵

品类:CMOS Rail-to-Rail IO Opamp

价格:¥0.6750

现货:4,100

品牌:AVAGO

品类:薄膜体声波谐振器

价格:¥7.9720

现货:4,090

品牌:聚洵

品类:运算放大器

价格:¥0.4620

现货:4,070

品牌:聚洵

品类:CMOS Rail-to-Rail IO Opamp

价格:¥1.0500

现货:4,040

品牌:

品类:

价格:

现货:

品牌:

品类:

价格:

现货:

品牌:

品类:

价格:

现货:

品牌:

品类:

价格:

现货:

品牌:

品类:

价格:

现货:

品牌:

品类:

价格:

现货:

品牌:

品类:

价格:

现货:

品牌:

品类:

价格:

现货:

品牌:

品类:

价格:

现货:

品牌:

品类:

价格:

现货:

查看更多

授权代理品牌:接插件及结构件

查看更多

授权代理品牌:部件、组件及配件

查看更多

授权代理品牌:电源及模块

查看更多

授权代理品牌:电子材料

查看更多

授权代理品牌:仪器仪表及测试配组件

查看更多

授权代理品牌:电工工具及材料

查看更多

授权代理品牌:机械电子元件

查看更多

授权代理品牌:加工与定制

世强和原厂的技术专家将在一个工作日内解答,帮助您快速完成研发及采购。
我要提问

954668/400-830-1766(工作日 9:00-18:00)

service@sekorm.com

研发客服
商务客服
服务热线

联系我们

954668/400-830-1766(工作日 9:00-18:00)

service@sekorm.com

投诉与建议

E-mail:claim@sekorm.com

商务合作

E-mail:contact@sekorm.com

收藏
收藏当前页面